Inversion of receiver function by wavelet transformation

Introduction Receiver function has been extensively applied in studying S wave velocity of crust and up-per mantle for about 20 years (Owens, et al, 1987; LIU, et al, 1996), which is a time series ob-tained by the deconvolution of vertical component from horizontal component for teleseismic P waveform. Receiver function represents the teleseismic P plane wave response of crust and upper mantle beneath seismic station, from which the source and propagation effects are removed. Receiver funct…     

Geostatistical inversion of coupled problems: dealing with computational burden and different types of data

Practical application of geostatistical inversion to coupled problems is hampered by a number of difficulties. In this paper, we address two of them: first, the computational cost of sensitivity (Jacobian) matrices and, second, the evaluation of the relative weights of different types of data. Regarding the first, we revise the adjoint state equations to propose a form whose cost is independent of the number of unknown parameters and only grows with the number of observation wells. Regarding the second, we derive expressions for the relative weights of different types of data. These expressions are based on minimizing the expected likelihood, rather than the likelihood itself. The efficiency of both improvements is tested on a synthetic example. The example analyzes a wide range of groundwater flow and solute transport conditions. Yet, the expected likelihood consistently yields the optimal weights. The proposed form of the adjoint state equations leads to one order of magnitude reduction in CPU time with respect to the conventional sensitivity equations.     

吐哈盆地中央构造带正反转演化特征

吐哈盆地中央构造带由火焰山构造和七克台构造组成。中央构造带形成于三叠纪晚期至侏罗纪早期,表现为伸展构造特征,生长断层上盘地层厚度明显大于下盘,并于断层上盘所在的台北凹陷形成沉降中心。晚侏罗世,由于拉萨陆块与欧亚大陆的碰撞作用导致吐哈盆地由伸展盆地转变为挤压盆地,中央构造带也于此时发生构造反转,由早期的伸展正断层转变为挤压逆断层。发生于55Ma的喜山构造事件对天山地区产生了深刻的影响,但影响时间略有滞后,大致发生在晚渐新世至早中新世,中央构造带即在此次构造事件中强烈变形,逆冲出露于地表。     

利用GPS位移和主应力方向观测资料进行川滇地区边界力的联合反演研究

在简要介绍了川滇地区的构造格局和构造运动特征的基础上，讨论了不同观测数据同时用于反演的合理性和物理意义，利用1998～2000年观测的9个测点位移数据和1986年以前所测的10个主应力方向数据，将边界力和相对权比λ作为待反演参数，并考虑了主要活动断裂运动特性，进行了弹性有限元数值反演计算。计算结果表明，现今川滇地区的构造活动主要力源仍来源于印度板块与欧亚大陆的碰撞，菲律宾海板块的挤压作用也不可忽略，这一结论说明了该地区现今构造运动的继承性活动特征。     

不确定性选址问题探讨

阐述了GIS网络分析中不确定性选址问题的基本模型及特性。从问题的定义可知其为NP完备类问题。推导了最优解在紧条件的下界算法,并结合广义Powell算法及遗传算法,提出了不确定性选址问题的混合遗传算法,实验证明,在最优解的品质和收敛速度上都达到了比较好的效果。同时,实验的结果从另一个角度证明,如果兼顾收敛速度和解的品质这两个指标,单纯的遗传算法未必比其他搜索算法更优越,采用一些局部搜索性能较好的算法结合遗传算法,可以从两方面改善求解效果。     

Engineering geology of loess and loess-like deposits: a commentary on the Russian literature

Loess and loess-like deposits were much studied in the Soviet Union, and are currently under investigation in Russia and surrounding countries. There is a vast literature in Russian, which touches on all aspects of loess science and technology. In particular, the studies of the origin of collapsibility are almost totally in Russian, and of course studies on the various regions of Russia and the countries of the Former Soviet Union FSU appear in Russian. This review looks at the literature in Russian and attempts to pick out key contributors, major topics and works and to identify the critical regions and zones of investigation. Because so many regions of the FSU had people living on loess ground, there is a vast literature on engineering geology and ground engineering topics, and this tends to dominate all the literature on loess in Russian. Following Russian practice, the fine-grained deposits under consideration are divided into loess and loess-like deposits. Three main topics are recognised across the whole spectrum of loess research: formation and distribution of loess deposits; stratigraphy, cyclicity and palaeoclimatology; and engineering topics, in particular hydrocollapse and subsidence, and we concentrate on the engineering geology topics. An attempt is made, based on the map of Abelev and Abelev [Abelev, Yu.M., Abelev, M.Yu., 1968. Fundamentals of design and construction on collapsible macroporous soils, 2nd ed. Stroiizdat, Moscow, 431 pp. (in Russian)] of collapsing loess deposits, to define seven loess regions within the geographical limits of the old USSR. The seven regions are those where geotechnical problems might be expected.     

POSITIVE INVERSION STRUCTURE OF THE CENTRAL STRUCTURE BELT IN TURPAN-HAMI BASIN

The central structure belt in Turpan-Hami basin is composed of the Huoyanshan structure and Qiketai structure formed in late Triassic-early Jurassic, and is characterized by extensional tectonics. The thickness of strata in the hanging wall of the growth fault is obviously larger than that in the footwall, and a deposition center was evolved in the Taibei sag where the hanging wall of the fault is located. In late Jurassic the collision between Lhasa block and Eurasia continent resulted in the transformation of the Turpan-Hami basin from an extensional structure into a compressional structure, and consequently in the tectonic inversion of the central structure belt of the Turpan-Hami basin from the extensional normal fault in the earlier stage to the compressive thrust fault in the later stage. The Tertiary collision between the Indian plate and the Eurasian plate occurred around 55Ma, and this Himalayan orogenic event has played a profound role in shaping the Tianshan area, only the effect of the collision to this area was delayed since it culminated here approximately in late Oligocene-early Miocene. The central structure belt was strongly deformed and thrusted above the ground as a result of this tectonic event.     

Permeability Estimation with the Augmented Lagrangian Method for a Nonlinear Diffusion Equation

We consider numerical identification of the piecewise constant permeability function in a nonlinear parabolic equation, with the augmented Lagrangian method. By studying this problem, we aim at also gaining some insight into the potential ability of the augmented Lagrangian method to handle permeability estimation within the full two-phase porous-media flow setting. The identification is formulated as a constrained minimization problem. The parameter estimation problem is reduced to a coupled nonlinear algebraic system, which can be solved efficiently with the conjugate gradient method. The methodology is developed and numerical experiments with the proposed method are presented.     

Geomechanical model for the post-Variscan evolution of the Permocarboniferous–Mesozoic basins in Northeast Germany

The Permocarboniferous basins in Northeast Germany formed on the heterogeneous and eroded parts of the Variscan orogene and its deformed northern foreland. Transtensional tectonic movements and thermal re-equilibration lead to medium-scale crustal fragmentation, fast subsidence rates and regional emplacement of large amounts of mostly acidic volcanics. The later basin formation and differentiation was triggered by reversals of the large-scale stress field and reactivation of prominent zones of weakness like the Elbe Fault System and the Rhenohercynian/Saxothuringian boundary that separate different Variscan basement domains in the area. The geomechanical behaviour of the latter plays an important role for the geodynamic evolution of the medium to large-scale structural units, which we can observe today in three dimensions on structural maps, geophysical recordings and digital models. This study concentrates on an area that comprises the southern Northeast German Basin, the Saale Basin, the Flechtingen High, the Harz Mountains High and the Subhercynian Basin. The presented data include re-evaluations of special geological and structural maps, the most recent interpretation of the DEKORP BASIN 9601 seismic profile and observations of exposed rock sections in Northeast Germany. On the basis of different structural inventories and different basement properties, we distinguish two structural units to the south and one structural unit to the north of the Elbe Fault System. For each unit, we propose a geomechanical model of basin formation and basin inversion, and show that the Rhenohercynian Fold and Thrust Belt domain is deformed in a thin-skinned manner, while the Mid-German Crystalline Rise Domain, which is the western part of the Saxothuringian Zone, rather shows a thick-skinned deformation pattern. The geomechanical model for the unit north to the Elbe Fault System takes account to the fact that the base of the Zechstein beneath the present Northeast German basin shows hardly any evidence for brittle deformation, which indicates a relative stable basement. Our geomechanical model suggests that the Permocarboniferous deposits may have contributed to the structural stiffness by covering small to medium scale structures of the upper parts of the brittle basement. It is further suggested that the pre-Zechstein successions underneath the present Northeast German basin were possibly strengthening during the Cretaceous basin inversion, which resulted in stress transfer to the long-lived master faults, as indicated for example by the shape of the salt domes in the vicinity of the latter faults. Contrary to this, post-Zechstein successions deformed in a different and rather complex way that was strongly biased by intensive salt tectonic movements.     

Numerical models of tectonic deformation at the Baltica–Avalonia transition zone during the Paleocene phase of inversion

Predictions from dynamic modelling of the lithospheric deformation are presented for Northern Europe, where several basins underwent inversion during the Late Cretaceous and Early Cenozoic and contemporary uplift and erosion of sediments occurred. In order to analyse the evolution of the continental lithosphere, the equations for the deformation of a continuum are solved numerically under thin sheet assumption for the lithosphere. The most important stress sources are assumed to be the Late Cretaceous Alpine tectonics; localized rheological heterogeneities can also affect local deformation and stress patterns. Present-day observations available in the studied region and coming from seismic structural interpretations and stress measurements have been used to constrain the model. Our modelling results show that lateral variation in lithospheric strength below the basin systems in Central Europe strongly controls the regional deformation and the stress regime. Furthermore, we have demonstrated that the geometry of the boundary between Baltica and Avalonia, together with different rheological characteristics of the two plates, had a crucial role on local crustal deformation and faulting regime resulting in the Baltica–Avalonia transition zone from the S–N Alpine convergence.