The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.     

夏季中国降水型的年代际变化与大气内部动力过程及外强迫因子关系

根据中国160站月平均降水、NCEP/NCAR的再分析资料以及英国气象局哈德莱中心1900～1999年全球1°×1°格点月平均海表温度距平资料,利用物理量诊断、EOF分析等方法,探讨东亚季风区大气环流内部动力过程与大气外强迫因子（海温）年代际变化及对中国夏季降水型的影响。分析发现,中国东部地区、西北地区夏季降水型有各自不同的年代际变化趋势;中国东部夏季降水型及东亚夏季风环流年代际变化趋势与大气外强迫因子北太平洋中纬度海温年代际变化（PDO）关系密切;中国西北地区夏季降水年代际变化与大气内部动力过程中纬度西风带扰动动能年代际减弱有关。     

产业内部结构升级对碳排放的影响——基于OECD主要成员国面板数据的实证分析

人类活动所引起的全球变暖已经成为当前世界各国需共同面对的问题。经济结构性特征是受到广泛认可的区域发展阶段替代指标,因而本文分别选用制造业和服务业产业内部结构为基本视角,对其细化信息进行挖掘,并在经济合作与发展组织（OECD）各主要成员国背景下对碳排放随经济发展阶段推进而演化的过程进行计量分析。结果显示：第一,产业内部结构具备更加丰富的区域经济发展阶段信息,能够在普遍意义上提供判别区域经济发展所处时期的良好标准,为处于不同发展阶段的国家进行差异化碳配额权分配提供参考;第二,制造业和服务业内部产业结构升级的阶段性对照结果说明,碳排放峰值时点滞后于工业化的顶峰位置;第三,人为碳排放在经济发展过程中呈现倒U型的固有演化规律,在工业化顶峰前的碳排放逐步增长是为了维持基本经济发展路径的不可抗趋势。因此,发展中国家在工业化顶峰前不承诺排放达峰具有较高合理性,但仍应通过推进产业结构高级化、发展生产性服务业等举措抑制碳排放增速、尽早实现达峰。     

A Simple Model Of The Convective Internal Boundary Layer And Its Application To Surface Heat Flux Estimates Within Polynyas

A simple model of the convective (thermal) internalboundary layer has been developed for climatologicalstudies of air-sea-ice interaction, where in situobservations are scarce and first-order estimates ofsurface heat fluxes are required. It is amixed-layer slab model, based on a steady-statesolution of the conservation of potentialtemperature equation, assuming a balance betweenadvection and turbulent heat-flux convergence. Boththe potential temperature and the surface heat fluxare allowed to vary with fetch, so the subsequentboundary-layer modification alters the fluxconvergence and thus the boundary-layer growth rate.For simplicity, microphysical and radiativeprocesses are neglected.The model is validated using several case studies.For a clear-sky cold-air outbreak over a coastalpolynya the observed boundary-layer heights,mixed-layer potential temperatures and surface heatfluxes are all well reproduced. In other cases,where clouds are present, the model still capturesmost of the observed boundary-layer modification,although there are increasing discrepancies withfetch, due to the neglected microphysical andradiative processes. The application of the model toclimatological studies of air-sea interaction withincoastal polynyas is discussed.     

基于分层分户图的室内外一体化三维模型构建与应用

房产三维是三维GIS的应用重点,分层分户图的三维建模更是房产三维建设的重要组成部分.本文对比了3 Ds Max建模、平面拉伸建模和分层分户图建模方法,分析了分层分户图建模优势,重点研究了分层分户图建立三维模型的方法.     

GDCORS多星系统定位平台测试与分析

广东省连续运行卫星定位服务系统(G DCORS)建成了兼容多星系统的北斗地基增强平台,组织开展了新平台与原平台的外业测试.并从内符合精度评定、重复性精度评定、外符合精度、初始化时长等方面对网络实时动态(RTK)定位结果进行了统计和比对分析.测试结果表明,新平台能够提供高可靠性、高精度的网络RTK服务.文中研究结果可为GDCORS用户使用新/原平台提供实际应用参考.     

测绘企业内部信息管理的内容及重要性

当前测绘市场竞争日益激烈,测绘企业为获取竞争优势,占领更多的市场份额,必须加强建设核心竞争力,企业内部信息管理是建设核心竞争力的内容之一。对信息进行有效地收集、筛选、分析、整理和储存、高效的管理和应用,是测绘企业现代化的必备条件。它既能满足日常生产需要,也能为企业管理和经营提供必要的统计信息,对其未来发展更具有深远的意义。     

SAR海洋内波表层流反演方法探讨

基于海洋内波SAR成像机理与M4S海面微波散射成像模型,提出SAR海洋内波表层流反演新方法。首先从SAR图像上获得内波剖面的海面后向散射强度,利用AH理论的线性近似关系得到猜测表层流,通过海面微波散射成像模型仿真海洋内波的SAR海面后向散射强度,利用二分法不断地修改风速和流速梯度等参数,使仿真信号最大程度的逼近实际SAR图像上的海面后向散射强度,输出最终海表层流。以中国南海海区3景海洋内波SAR图像为例,对该方法进行了探讨。结果表明,仿真的海洋内波SAR海面后向散射强度剖面和实际SAR图像上的信号剖面吻合,两者的相关系数达90%以上,说明该反演方法是收敛与可行的。     

对DMAPS野外采集程序的改进

随着数字化测图的开展和深入,安徽省测绘局DMAPS成图软件野外采集程序的原有功能已不能较好的满足数字化生产需求,但其本身和其它数字化成图软件的野外采集程序相比又有较多的优点,如加以适当改进,便能更好的适应数字化测图的需要,本文论述对野外采集程序加以改进的方法。     

附有限制条件的间接平差与附有条件的条件平差的内在联系探讨

通过运用附有条件的条件平差原理解算附有限制条件的间接平差模型,以及运用附有限制条件的间接平差原理解算附有条件的条件平差模型,推证得出结论:对于同一个平差问题而言,这两种平差模型是完全等价的,都可作为各种经典平差模型的概括平差模型。