Structural investigation of the synthetic CaAn(PO4)2 (An = Th and Np) cheralite-like phosphates

The crystallographic structures of the synthetic cheralite, CaTh(PO₄)₂, and its homolog CaNp(PO₄)₂ have been investigated by X-ray diffraction at room temperature. Rietveld analyses showed that both compounds crystallize in the monoclinic system and are isostructural to monazite LnPO₄ (Ln = La to Gd). The space group is P2₁/n (I.T. = 14) with Z = 2. The refined lattice parameters of CaTh(PO₄)₂ are a = 6.7085(8) Å, b = 6.9160(6) Å, c = 6.4152(6) Å, and β = 103.71(1)° with best fit parameters R _wp = 4.87%, R _p = 3.69% and R _B = 3.99%. For CaNp(PO₄)₂, we obtained a = 6.6509(5) Å, b = 6.8390(3) Å, c = 6.3537(8) Å, and β = 104.12(6)° and R _wp = 6.74%, R _p = 5.23%, and R _B = 6.05%. The results indicate significant distortions of bond length and angles of the PO₄ tetrahedra in CaTh(PO₄)₂ and to a lesser extent in CaNp(PO₄)₂. The structural distortions were confirmed by Raman spectroscopy of CaTh(PO₄)₂. A comparison with the isostructural compounds LnPO₄ (Ln = Ce and Sm) confirmed that the substitution of the large rare earth trivalent cations with Ca²⁺ and Th⁴⁺ introduces a distortion of the PO₄ tetrahedra.     

Optical spectrum based measurement of flotation slurry contents

Monitoring and control of a flotation circuit is mainly based on the information gained by assaying the process slurry lines. In flotation plants, usually an X-ray fluorescence analyzer is used to obtain the on-line assays. This article introduces the visual and near-infrared reflectance spectroscopic analysis of the process slurries as a supplementary method which complements the on-line assay information available from an X-ray fluorescence analyzer. It is shown that the spectral information can be used to accurately predict the element contents in the slurry in between successive XRF analyses. Since the spectral measurements can be taken with high frequency as opposed to the sparse X-ray fluorescence analysis, a practically continuous on-line estimate of the slurry contents is reached. These estimates can be used in the plant control to improve the overall performance of the circuits and to yield also economical savings. Additionally, the frequent monitoring of the grades can provide means to eliminate rapid disturbances in the circuits, thus improving the stability of the process.     

Effect of Inter-Column Spacing on Soil Stresses due to Vibro-Installed Stone Columns: Interesting Findings

This paper reveals the interesting relation between the inter-column spacing and the corresponding alteration of soil state of stresses due to the vibro-installation technique. This relation is inferred from analyses for load settlement records of various field load tests, performed for stone columns arrangements with different inter-column spacing values. In order to have adequate confidence in the findings, a well-documented case history, involving three columns patterns along with their relevant field and laboratory test results, is utilized for this study. Moreover, a well-tested finite element model, capable of simulating both elasto-plastic and time dependent soil deformations as well as pore water pressure building and dissipation, is employed in the analysis. Instead of determining the soil response to the test load, based on known initial soil stresses and material properties, the analysis is inversely posed to determine the soil initial stresses, based on the recorded settlements and the post-installation material properties. The alteration in the soil state of stress is represented by the increase in the post-installation horizontal to vertical stress ratio, K*, as a function of the inter-column spacing. It is found that this alteration experiences a systematic decrease in its magnitude as the inter-column spacing increases.     

Monitoring Large-Scale Tests for Nuclear Waste Disposal

Two large-scale “in situ” demonstration experiments and their instrumentation are described. The first test (FEBEX Experiment) involves the hydration of a compacted bentonite barrier under the combined effect of an inner source of heat and an outer water flow from the confining saturated granite rock. In the second case, the progressive de-saturation of Opalinus clay induced by maintained ventilation of an unlined tunnel is analyzed. The paper shows the performance of different sensors (capacitive cells, psychrometers, TDR’s) and a comparison of fill behaviour with modelling results. The long term performance of some instruments could also be evaluated specially in the case of FEBEX test. Capacitive sensors provide relative humidity data during long transient periods characterised by very large variations of suction within the bentonite.     

在各类天气系统影响下石臼港沿岸波浪场的分布

本文查阅了从１９７３－１９８５，１３年的历史资料，对石臼港沿岸波浪场进行了详细的分类、统计分析和计算，提出了各类较强天气系统影响石（即指石臼港）的极端区域，同时获得了石港沿岸各类天气系统影响下的波浪分布特点以及波高计算式，为保障石港的生产及港口建设为石港的波了提供了有益的分析数据和预报手段。     

南太平洋辐合带(SPCZ)的特征分析

根据热带西太平洋卫星云图资料及流场特征分析,讨论了南太平洋辐合带(SPCZ)的演变特征和形成机理。提出SPCZ是反映西太暖池同东太冷舌海气耦合系统以及暖池大气同相邻陆区大气间相互作用的重要特征。主要表现为在12～2月的热带西太平洋上的NW/SE辐合带,其形成原因主要应归因于西太暖池本身,以及暖池与东太赤道冷水舌强度与相对位置改变引发的Walker环流位置与走向的变动,另外,新几内亚岛及澳洲大陆也有重要影响。     

海洋石油管道单点提升分析

基于管道微单元体平衡建立了海管单点提升的非线性力学模型的控制微分方程组 ,使用变弧长的无量纲代换将动边界问题化为固定边界的两点边值问题 ,利用Maple环境下编制的两点边值问题的打靶法程序得到了该问题在各个提升阶段的数值解答和在单点提升过程中管道的极限弯矩约为 0 .71q1 3(EI) 2 3。     

南黄海表层沉积物天然湿容重和含水量的分布及其与粒度之间的关系

本文论述了南黄海表层沉积物天然湿容重和含水量的分布,并利用回归分析的方法讨论了容重和含水量与粒度之间的关系。结果表明,容重和含水量与粘土粒级相关性最好,容重与粘土粒级含量(相似文献   

E1 Nio phenomenon in simple ocean data assimilation data

1 IntroductionIt is well known that interaction between the trop-ical ocean and atmosphere produces the largest inter-annual climate signal, El Nino-Southern Oscillation(ENSO). In past decades many efforts have been madein understanding and predicting ENSO: such as the hy-pothesis of Bjerknes (1969) that ENSO arises as aself-sustained cycle in which SSTA in the Pacific O-cean causes the trade winds to strengthen or slackenand that this in turn drives the ocean circulation changesthat …     

鱼粉脂肪酸组成的分析研究

本文应用气相色谱对水产饲料的主要原料——— 4类进口鱼粉的脂肪酸组成进行分析 ,结果表明 :①鱼粉中主要脂肪酸含量SFA为C1 6∶0、C1 8∶0 ,MUFA为C1 8∶1、C1 6∶1 ,PUFA为EPA和DHA .② 4类鱼粉中 ,美国、新西兰、俄罗斯的鱼粉MUFA含量较为接近 ,都在 4 0 %左右 ,但新西兰鱼粉的C1 8∶1含量较美国鱼粉高 ,其平均值分别为 2 50 %和 1 9.53% ,而C 2 0∶1、C2 2∶1 ,则比美国低一些 ,俄罗斯鱼粉的含量居两者之间 .智利鱼粉的MUFA比前 3种鱼粉低 ,只有 30 %左右 .③ 4类鱼粉中新西兰鱼粉的PUFA最低 ,它们的EPA与DHA的比值为 :美国鱼粉接近 1∶1 ,新西兰鱼粉为1∶1 .5～ 1∶3.2 ,俄罗斯鱼粉为 1∶1 .2～ 1∶1 .4 ,智利鱼粉为 1∶2左右 ,④智利鱼粉的C2 2∶5n 3明显高于其它 3类鱼粉 ,而C2 0∶1、和C2 2∶1则明显低于其它 3类鱼粉