A comparative study on the illite crystallinity and the clay mineral reflectance spectral index for subdividing the very low-grade metamorphic belt along the Lizhou-Hekou geological section in the Youjiang sedimentary basin, Guangxi, China

To examine the application potential of hyperspectral remote sensing techniques in classifying very low-grade metamorphic belts, the composition of clay minerals and the cyrstallinity of illite from mudstones were measured using XRD and VIS-SWIR (400-2500 nm) reflectance spectroscopy. Based on the illite cyrstallinity, Kubler Index (KI), the Early Triassic LuoLou Group and the Middle Triassic lower Baifeng Formation were classified as the lower Epizone with KI△2θ° ranging from 0.22 to 0.25, the upper Baifeng Formation as upper anchizone with KI△2θ°ranging from 0.26 to 0.33, and the Hekou Formation as lower anchizone with KI△2θ° ranging from 0.38 to 0.40. According to a KI△2θ° value of 0.43, it is possible that there may exist a local diagenetic zone in the upper strata. The illite cyrstallinity Kubler index and the metamorphic grade increase from the bottom to the top of the stratigraphic sequence. The metamorphic grade boundaries nearly match the stratigraphic boundaries, indicating a burial metamorphism nature for the stratigraphic sequence. From the bottom to the top of the sequence, the spectral absorption band center of clay minerals from fresh rocks is around 2200 nm. The absorption band centers change towards shorter wavelengths: the Luolou Group being at 2220 nm, the Baifeng Formation at 2217-2213 nm, the lower member of the Hekou Formation at 2214-2206 nm, and the upper member of the Hekou Formation at 2205-2197 nm. The spectral absorption band center of illite shows the same change pattern. These results indicate that very low-grade metamorphic belts can be subdivided using spectral indices of clay minerals, which are measured by using field portable spectroradiometers. However, it may not work well with satellite and airborne sensors.     

TRMM卫星微波成像仪分级产品及其反演降水算法

文章叙述了获取定量降水信息的意义，简要介绍了对热带测雨卫星TRMM(Tropical Rainfall Measurement Mission)的仪器、美国国家宇航局提供的微波成像仪TMI(TRMM Microwave Imager)分级产品。对比了物理方法和经验方法反演降水的特点，并对一些经验方法以及倾斜对流系统对反演降水的影响、动态聚类分析、神经网络反演方法的研究成果进行了介绍。     

测试超细煤粉粒度的实验研究

利用激光粒度仪测试超细煤粉的粒度。对测试超细煤粉试样粒度时的试样浓度、测试温度、分散时间、分散剂的种类及浓度等方面的影响进行了实验研究，给出了激光粒度仪测试超细煤粉粒度的最佳实验条件。     

裂变径迹长度测量标准化研究——锆石蚀刻标准探讨

通过不同时间蚀刻的锆石径迹长度测量,确定海南迅速冷却火山型锆石的水平封闭径迹(HCT)平均长度L＝10.93 μm,标准偏差为0.93 μm,可作为锆石长度测量的参照标准.对锆石的蚀刻标准进行了探讨,确立垂直C轴的表面径迹宽度Dpar为(1.0±0.5)μm的蚀刻标准,要求Dpar>1 μm和Dpar<1 μm的颗粒数应大致相当,以及封闭径迹宽度DHCT<1.0 μm的测量标准.     

液压传感间接测量水位计的研制及其应用

压力式水位计在水文自动测报系统中很难推广的主要原因是泥沙对传感器的影响,泥沙不但会使传感器测量精度达不到测验要求,而且由于泥沙淤积还会给水位计的日常维护带来很大不便。目前进口传感器测量精度高、稳定性能好,但仍避免不了泥沙的影响。针对这一问题,提出了一种新型压力式水位计———液压传感间接测量水位计,该水位计解决了泥沙对压力式水位计的影响,是一种具有很大发展前景的水位测量仪器。     

利用VB编程完成基点网联测中的各项计算

整套重力计算程序包括了除“地改”以外的所有项目的计算，在这篇文章中我们先仅介绍了“测区参数初始化”及“基点网联测”(采用三程小循环方式)的计算方法。“测区参数初始化”功能可生成gdw．csh初始化文件(该套程序的各项功能都要读取该文件中的相关参量)；“基点网联测”功能可计算基点网联测的各项精度，对联测进行平差，求出各分基点绝对重力值。     

高速公路软基加固质量的瑞利波检测与小波分析技术

论述了用瑞利波检测高速公路软基加固的一些主要技术问题,应用新兴的小波分析技术,改善和提高检测的质量,并通过福宁高速公路的实际检测结果,说明了其思路和方法的正确性、实用性.     

The gravity field and GGOS

The gravity field of the earth is a natural element of the Global Geodetic Observing System (GGOS). Gravity field quantities are like spatial geodetic observations of potential very high accuracy, with measurements, currently at part-per-billion (ppb) accuracy, but gravity field quantities are also unique as they can be globally represented by harmonic functions (long-wavelength geopotential model primarily from satellite gravity field missions), or based on point sampling (airborne and in situ absolute and superconducting gravimetry). From a GGOS global perspective, one of the main challenges is to ensure the consistency of the global and regional geopotential and geoid models, and the temporal changes of the gravity field at large spatial scales. The International Gravity Field Service, an umbrella “level-2” IAG service (incorporating the International Gravity Bureau, International Geoid Service, International Center for Earth Tides, International Center for Global Earth models, and other future new services for, e.g., digital terrain models), would be a natural key element contributing to GGOS. Major parts of the work of the services would, however, remain complementary to the GGOS contributions, which focus on the long-wavelength components of the geopotential and its temporal variations, the consistent procedures for regional data processing in a unified vertical datum and Terrestrial Reference Frame, and the ensuring validations of long-wavelength gravity field data products.     

森林沼泽景观区中大比例尺化探找矿工作方法的研究--记大梁金矿的发现

大梁金矿是通过森林沼泽景观区开展1：50000和1：25000地球化学测量及综合地质工作而发现的,证明采用的森林沼泽景观中大比例尺化探方法是行之有效的.     

Measurement of stream cross section using ground penetration radar with Hilbert–Huang transform

This study presents a new method to measure stream cross section without having contact with water. Compared with conventional measurement methods which apply instruments such as sounding weight, ground penetration radar (GPR), used in this study, is a non‐contact measurement method. This non‐contact measurement method can reduce the risk to hydrologists when they are conducting measurements, particularly in high flow period. However, the original signals obtained by using GPR are very complex, different from studies in the past where the measured data were mostly interpreted by experts with special skill or knowledge of GPR so that the results obtained were less objective. This study employs Hilbert–Huang transform (HHT) to process GPR signals which are difficult to interpret by hydrologists. HHT is a newly developed signal processing method that can not only process the nonlinear and non‐stationary complex signals, but also maintain the physical significance of the signal itself. Using GPR with HHT, this study establishes a non‐contact stream cross‐section measurement method with the ability to measure stream cross‐sectional areas precisely and quickly. Also, in comparison with the conventional method, no significant difference in results is found to exist between the two methods, but the new method can considerably reduce risk, measurement time, and manpower. It is proven that the non‐contact method combining GPR with HHT is applicable to quickly and accurately measure stream cross section. Copyright © 2013 John Wiley & Sons, Ltd.