Surface chemical analysis in coal preparation research: complementary information from XPS and ToF-SIMS

The application of X-ray photoelectron spectroscopy (XPS) to coal surface characterisation for preparation research is described. Progress towards the acquisition of complementary surface chemical information by time-of-flight secondary ion mass spectrometry (ToF-SIMS) is also discussed. Surface-based beneficiation techniques such as flotation are assuming greater importance as the proportion of fines in raw coal increases due to the proliferation of high capacity mining methods. A necessary condition for the floatability of a coal particle is adequate hydrophobicity, and the degree of hydrophobicity of the flotation concentrate is one factor influencing the ease with which its dewatering can be affected. The hydrophobicity of a coal is very difficult to measure directly because of microporosity, and it is often necessary to deduce the degree of hydrophobicity from a knowledge of the surface chemistry. XPS is able to provide sufficient analytical data to allow relative levels of hydrophobicity to be estimated. In principle, ToF-SIMS should be able to supply additional information enabling refinement of such estimates; however, there are insufficient data at present to allow the ionic fragments detected to be related to specific functional groups at the coal surface.     

计算样本相似性在油气预测中的应用

介绍了计算样本相似性方法在油气预测中的应用的基本原理和技术。提出了利用参数的显著性进行参数优化和加权的方法。该方法简单、实用，并在塔北某区的应用取得了满意结果。由此证明了该方法的有效性及在综合信息预测工作中进行参数优化和加权工作的重要性。     

Geochronology, geochemistry and tectonic implications of Xiongshan diabasic dike swarm, northern Fujian

Sm/Nd isotopic age determination showed that Xiongshan dike swarm was at 585.7 Ma ± 30 Ma. The trace element geochemistry and Sr/Nd/Pb isotope gemhemistry studies indicate that the dike swarm was products of back-arc basin spreading ridge and the magma originated from the depleted mantle region which was metasomatized by LILE-rich liquids/melts derived from subduction slab. Project supported by the National Natural Science Foundation of China.     

计算机内存的分类及优化管理

本文从计算机应用角度出发，介绍了计算机内存的基本结构及其类型内存配置对计算机工作的影响，同时讨论了如何合理计算机内存，以便充分发挥计算机的优势。     

2003年6月青岛崂山4级震群序列初步分析

从震群监测、地震影响、地震地质构造、序列特点及性质判定等方面对2003年6月青岛崂山王哥庄发生的4级震群进行了介绍及初步分析。此次地震的活动强度、频次、持续时间均为青岛历史上所罕见。地震时整个青岛市普遍有感，震中区有一定破坏，造成较大的社会影响。     

基于复模态的有限元模型修正算法

针对地下结构地震响应分析中无限地基辐射阻尼问题，引入复模态情况下的具有非简化的堆积阻尼矩阵的阻尼模型，并针对具有集中质量阵的阻尼模型提出了合并与质量有关的阻尼和堆积阻尼的思想，并据此提出了一种修正此类有限元模型的两步法，首先从复模态参数中提取实模态参数，采用基于模态残余力的识别算法修正刚度矩阵，然后根据复模态参数和已得的刚度矩阵来识别阻尼模型中的刚度参与系数和质量阻尼堆积阻尼联合矩阵。     

利用Cole-Cole模型组合得到SIP真参数的联合频谱最优化反演

利用Cole-Cole模型组合和稀释系数理论，可以描述测量得到的视复电阻率频谱与地下多个电性体SIP真参数之间的正演关系。本利用此正演关系进行反演试算，并比较了几种Cole-Cole模型反演方案的效果；提出固定极化目标体和围岩体的极化率同时反演其它各SIP真参数的反演方案。结果表明在固定极化率为真值时，利用此反演方案可以稳定、准确、快速地得出地下电性体SIP真参数。     

A Simple Parameterisation for Flux Footprint Predictions

Flux footprint functions estimate the location and relative importance of passive scalar sources influencing flux measurements at a given receptor height. These footprint estimates strongly vary in size, depending on receptor height, atmospheric stability, and surface roughness. Reliable footprint calculations from, e.g., Lagrangian stochastic models or large-eddy simulations are computationally expensive and cannot readily be computed for long-term observational programs. To facilitate more accessible footprint estimates, a scaling procedure is introduced for flux footprint functions over a range of stratifications from convective to stable, and receptor heights ranging from near the surface to the middle of the boundary layer. It is shown that, when applying this scaling procedure, footprint estimates collapse to an ensemble of similar curves. A simple parameterisation for the scaled footprint estimates is presented. This parameterisation accounts for the influence of the roughness length on the footprint and allows for a quick but precise algebraic footprint estimation.     

颗粒分析用量筒的规格标准和计量标定

文章讨论了国内外用于密度计法颗粒分析用量筒的计量标准的规定，提出了相应的建议和标定方法。     

Analysis of parameters of ground vibration produced from bench blasting at a limestone quarry

The aim of this study is to predict peak particle velocity level at a limestone quarry located in Istanbul, Turkey. The ground vibration components were measured for 73 blast events during the bench blast optimization studies during a long period. In blasting operations; ANFO (blasting agent), gelatine dynamite (priming) and NONEL detonators (firing) were used as explosives at this site. Parameters of scaled distance (charge quantity per delay and the distance between the source and the station) were recorded carefully and the ground vibration components were measured by means of vibration monitors for every event. Then, the data pairs of scaled distance and particle velocity were analyzed. The equation of scaled distance extensively used in the literature was taken into consideration for the prediction of peak particle velocity. At the end of statistical evaluations, an empirical relationship with good correlation was established between peak particle velocity and scale distance for this site. The established relationship and the results of the study are presented.