论油气化探精查技术及其应用

油气化探精查技术是在盆地有利聚集区(带)进行化探和石油地质详查的基础上,对圈闭进行含油气性评价并优选钻探目标的化探精细调查技术.它是包含样品采集、实验测试、信息提取和解释评价等为一体的系列技术.简述精查技术产生的背景,在论述化探精查技术及其在中国中东部地区的应用效果的基础上,展望该项新技术在西部油气勘探中的应用前景.     

生命线地震工程的研究进展

以我国、美国和日本的研究成果为依据，综述了生命线地震工程的研究概况、研究对象、震后恢复过程优化以及抗震防灾对策的新趋势。     

Microearthquakes and faulting in the southern Okinawa Trough

Southern Okinawa Trough represents an early stage of back-arc rifting and is characterized by normal faulting and microearthquakes. Earthquake distribution and deep structure of fault was investigated to clarify active rifting in the southern Okinawa Trough, where two parallel grabens are located. A network of ocean bottom seismometers (OBSs) that displayed the hypocenters of 105 earthquakes were observed for a period of 4 days in southern-graben (SG). Most of the microearthquakes occurred in a cluster about 7 km wide, which on a cross-section striking N45°E dips 48° to the southwest. Relocated hypocenters, which are recorded by a local seismic network, show scattered distribution around the southern-graben. There are no remarkable surface faults in the southern-graben. On the other hand, the recalculation of hypocenter locations of 1996 earthquakes swarm recorded by a local seismic network suggests that the swarm is associated with normal faulting on the southern side of northern-graben (NG). Thus, the undeveloped southern-graben is located to the south of the developed northern-graben. Southward migration of rifting, which may be caused by migration of volcanism, could thus be occurring in the southern Okinawa Trough. The extension rate computed for the southern Okinawa Trough from the fault model of the northern-graben is 4.6 cm/year, which is 59–102% of the extension rate (GPS measurements). This result indicates that the majority of extensional deformation is concentrated within the center of the northern-graben in the Okinawa Trough.     

土钉支护结构的优化设计

根据复形优化原理,提出了基于Bishop法的土钉支护结构的优化分析方法,编写了优化分析程序。工程实例计算表明,该方法是进行土钉优化设计的有效方法。     

使用Intel编译器优化中尺度模式MM5在奔腾4上的运行

本文介绍了一种在奔腾4处理器微机上Linux操作系统下的优化编译方法。作者通过查询、试验发现：使用Intel编译器优化中尺度模式MM5，能够使得MM5在奔腾4上的运行速度提高1．4～1．5倍。利用Intel编译器优化后的MM5模式，进行了三个月资料的计算，模式运行稳定。给出了一个使用Intel编译器和通常使用的PGI编译器分别编译的计算实例，对比表明：使用Intel编译器明显提高了运算速度，两种编译方法预报的降水场和形势场没有太大差异。     

粘粒含量对南京粉细砂液化影响的试验研究

南京粉细砂是一种以片状颗粒成分为主的粉细砂，与通常的圆形颗粒石英砂有一定区别，片状颗粒成分使得南京粉细砂具有各向异性的性质。通过对不同粘粒含量的南京粉细砂进行液化试验，分析其试验结果发现：对于粘粒含量ρc＝5％、10％和15％三种情况，在均压固结情况下，当南京粉细砂达到初始液化时，采用变形标准和孔压标准是一致的；而偏压固结时，只能采用变形标准作为南京粉细砂达到初始液化的标准，此时振动孔压仅达到围压的50％-70％。粘粒含量对南京粉细砂的抗液化强度影响很大，随粘粒含量增加，在不同固结比时，其抗液化强度并不是单调变化，而是在粘粒含量ρc＝10％左右处于一个低谷，其抗液化强度最低。     

Comparison of the Langrangian Footprint

We compare flux and concentration footprint estimates of athree-dimensional Lagrangian stochastic dispersion modelapplying backward trajectories with the results of ananalytical footprint model by Kormann and Meixner.The comparison is performed for varying stability regimesof the surface layer as well as for different measurementheights. In general, excellent correspondence is found.     

铂族元素迁移富集机理的新探

在岩浆及高温热液中，拍族元素以纳米液态铂族元素单质、铂族元素与其它金属元素的纳米液态合金、纳米液态铂族元素的硫、砷化物迁移。在中、低温热液及表生条件下，除呈上述固态纳米铂族矿物随流体迁移外，还呈配合物形式迁移。然后它们在合适的条件下沉淀富集形成矿床。此外，还讨论了铂族元素与金地球化学条件的异同。     

ICAP仪器主要工作条件的优化方法研究

ＩＣＡＰ仪器在不同工作条件下，其测试精度与准确值差别是较大的。因此，正确进行工作条件的优化，是ＩＣＡＰ仪器分析工作的关键。本文从理论依据及实验方法两个方面探讨了实现条件优化的具体方法，以及其对于确保仪器的最佳测试状态和进一步扩大测试领域所具有的实际意义。     

Transport in a 2-D saturated porous medium: A new method for particle tracking

A new method for solving the transport equation based on the management of a large numbe of particles in a discretized 2-D domain is presented. The method uses numerical variables to represent the number of particles in a given mesh and is more complex than the 1-D problem. The first part of the paper focuses on the specific management of particles in a 2-D problem. The method also would be valid for three dimensions as long as the medium can be modeled similar to a layered system. As the particles are no longer tracked individually, the algorithm is fast and does not depend on the number of particles present. The numerical tests show that the method is nearly numerical dispersion free and permits accurate calculations even for simulations of low-concentration transport. Because each mesh is considered as a closed system between two successive time steps, it is easy to add adsorption phenomenon without any problem of numerical stability. The model is tested under conditions that are extremely demanding for its operating mode and gives a good fit to analytical solutions. The conditions in which it can be used to best advantage are discussed.