Investigation of electrical anisotropy in the deep borehole KTB

Information about electrical anisotropy in and around the deep borehole of the German Continental Deep Drilling Program (KTB) has been acquired using three different methods: (1) Under surface temperature and pressure conditions, the azimuthal dependence of resistivity has been measured in horizontal planes perpendicular to the axes of drill cores. (2) Simulated in-situ conditions (high temperature and pressure) have been applied to mini cores drilled at different orientations to structural features such as foliation. The resistivity was then measured in the direction of the mini cores' long axes. (3) Under quasi-in-situ (downhole) conditions, the azimuthal dependence of resistivity has been measured in horizontal planes using the Azimuthal Resistivity Imager (ARI), a down hole logging tool.These investigations have shown that electrical anisotropy is strongly related to structural features. The anisotropy of gneisses is the highest due to the strong foliation (averaged anisotropy factor 2.8). Lamprophyres are most isotropic (factor 1.2). Most rocks from KTB are amphibolites with intermediate anisotropies (factor 1.3). The anisotropies measured under surface temperature and pressure conditions and quasi-in-situ conditions on amphibolites are approximately the same, whereas anisotropies under simulated in-situ conditions are partially higher.Furthermore, the anisotropies measured on the cm to m scale using the various methods outlined above shall be compared with large scale anisotropies of the km scale measured around KTB using Magneto Tellurics.     

应用深层平板载荷试验选择桩端持力层

深层平板载荷试验是一种新兴的原位测试方法。通过安阳某工程人工挖孔扩底灌注桩深层平板载荷试验的现场实践,确定了不同土层地基土的承载力特征值,为设计单位选择持力层提供数据,并为甲方节省了大量建设资金。     

钢筋混凝土圆环内支撑在软土深基坑支护中的设计与应用

通过对星河世纪城B2地块工程基坑成功支护设计实例介绍,全面阐述了钢筋混凝土圆环内支撑体系独特的布置形式、内力计算模式、方法和结果,以及在施工过程中的质量保证,为软土地基中类似基坑工程提供借鉴。     

滇西南钾盐调查MK-3大口径超深井绳索取心钻进工艺

滇西南中生代盐盆地钾盐资源调查评价项目MK-3井,设计井深2700 m,全孔取心,岩心直径≮80 mm,一般井段岩心采取率达到80%以上,盐岩段岩心采取率＞95%。工程技术要求高,施工难度大。施工中遇到了地层坍塌、涌水、掉块、盐岩溶蚀等问题,通过采用氯化镁饱和盐水冲洗液,HXY-9B型钻机取心钻进、TSJ-2000型水源钻机扩孔钻进,分级下管隔离等措施,圆满完成了钻探任务。完钻井深2701 m,岩心采取率90%,盐岩段岩心采取率达98.65%,终孔口径127 mm,岩心直径81 mm。经地球物理测井,各项指标都达到了设计要求。刷新了国内CHD127标准绳索取心钻杆P口径钻探深度的记录。     

深孔用高钢级绳索取心钻杆分区热处理工艺试验研究

为改善绳索取心钻杆受力工况,延长钻杆使用寿命,满足深孔及特深孔钻探施工要求,开展了对绳索取心钻杆体进行分区热处理工艺的试验研究。试验选用高钢级薄壁管材,通过对钻杆两端300 mm左右的区间内进行盐浴淬火及高温回火处理,保证了调质区域的机械性能,硬度和金相组织均匀性良好,同时热处理过渡带影响区域小。试制加工的特深孔绳索取心钻杆具有两端部螺纹连接段刚性强、杆体中部韧性好的特点。该钻杆在山东莱州西岭村矿区完成了2845.55 m深孔的钻进施工,使用情况良好。     

二连断陷盆地群伸展构造系统及其发育的深部背景

二连盆地形成于侏罗纪到早白垩世期间,是东北亚断陷盆地系内的一个典型的盆岭式断陷盆地群,其内蕴藏丰富的煤和油气资源,综合分析了二连盆地油气勘探中积累的地质资料,系统地研究了与盆地形成有关的构造,并与北美西部盆岭省进行了对比,揭示了二连盆地宽裂陷作用和低拉伸率条件下的伸展构造系统。以上述研究和前人的研究成果为基础,探讨了盆地发育的深部背景。     

The deep-lake deposit in the Upper Triassic Yanchang Formation in Ordos Basin, China and its significance for oil-gas accumulation

The deep-lake facies of the Yanchang Formation represents a large outflowing lake basin in the Ordos area. Its deposition can be divided into four stages lake genetic and expanding stage, peak stage, inversion stage and dying stage. All the stages are obviously consistent with the evolution of depositional environment and the paleoclimate in the region. The study indicates that the lake basin has evolution fluctuations from highstand to lowstand for four times in its evolution history, and the deposition center of the lake has not obviously moved, staying along the Huachi-Yijun belt. The deep lake sedimentary system mainly consists of deep water deltas and turbidite fans during the entire evolution course of the lake basin in the Late Triassic. The former mainly developed on the slope of steep shore of the delta in the early period of the deep-water expansion and gradually experienced a big shift from deep-water deltas to shallow-water platform delta. And the latter appeared almost in all the above stages and had two types of turbidite fans, slope-moving turbidite fans and slump turbidite fans. The slope-moving turbidite fans have relatively complete facies belts overlapping one another vertically and consist of the slope channel of inter fans, the turbidite channel, inter turbidite channel and turbidite channel front of middle fans and outer fans (or lakebottom plain). However, the slide-moving turbidity fans are formed in the deep lake with their microfacies difficult to be distinguished, and only the center microfacies and edge microfacies can be determined. The two types of the turbidity fans are similarly distributing in the near-root-slope and far-root-slope regions. The deep-lake deposition governs the distribution of the hydrocarbon and reservoir, while the slope-moving turbidite fans are excellent reservoirs for oil-gas exploration due to their great thickness, widespread distribution and accumulation properties.     

21世纪的大洋钻探——IODP

人类在地球科学方面已取得了相当大的成就,但就研究范围而言,却仅仅触及了地球的表层。IODP是一项国际性的大洋钻探计划,预期将于2003年10月正式开始实施。IODP将运用新的科学方法、科技设备,使人类对大洋底乃至整个地球系统得出更深、更广的认识。简单介绍了IODP的由来、组织机构、钻井技术、前期科学目标及中国的深海研究现状,提出中国参与IODP的必要性和可行性。通过了解21世纪的IODP在研究课题及研究技术方面的最新动态,不仅有助于我国根据国际动态调整深海研究的方向,制定符合我国需求的研究计划,而且有助于我国把握参与21世纪IODP的时机和策略,迎接“海洋世纪”的挑战,从而逐步实现“从地学大国走向地学强国”的目标。     

深部软岩巷道锚注支护数值模拟研究

采用大型有限元数值模拟软件ANSYS,对深部软岩巷道锚注支护前后围岩变形破坏规律进行了数值模拟,对锚注支护前后围岩的应力、位移及塑性区的变化情况等进行了系统分析,结果表明,锚注支护显著提高了围岩的强度和承载能力,有效地控制了深部软岩巷道的损伤变形。     

深部大变形回采巷道围岩拉压分区变形破坏的模拟研究

为研究深部回采巷道围岩大变形破坏规律,在地质力学评估及矿压显现特征实测的基础上,采用真三轴相似模拟方法,模拟了不同加载梯度下巷道围岩应变特征。结果显示,在浅埋静水压力条件下,巷道围岩呈现“浅部拉应变、深部零应变”的特征;深埋静水压力及初掘采动应力下巷道围岩出现“径向应变拉压交替分布”现象;当采动应力集中系数大于2时,深埋巷道围岩应变进入非线性大应变状态。采用FLAC3D的应变软化模型与摩尔-库仑模型,对比研究了深部回采巷道围岩位移、塑性区分布规律。结果表明,应变软化条件下,巷道围岩产生拉、压分区破坏且软化后的围岩位移与实测结果更吻合。综合研究结果,揭示了深部回采巷道围岩拉、压分区的产生机制,初步提出了注浆、喷层等措施,防止过度应变软化引起深部回采巷道围岩大变形,为类似巷道稳定性控制提供了一定的参考。