Different Generating Mechanisms for the Summer Surface Cold Patches in the Yellow Sea

ABSTRACT

It has been frequently observed that there are surface cold patches (SCPs) in the Yellow Sea in summer. Although previous studies based on monthly mean temperature distribution found that these SCPs are a result of tidal mixing and tide-induced upwelling, tidal mixing and upwelling alone cannot explain all the occurrences. In our study we found that the three typical patches, namely, the Shandong SCP, the Subei SCP, and the Mokpo SCP, have different temporal patterns over a spring–neap tidal cycle; hence, they have different generating mechanisms. Based on a multiple-year simulation, the latter two show conspicuous spring–neap variations. The highest temperature occurs during the neap tide phase (about two days after a quarter moon). Because of weak upwelling and mixing, strong stratification is established and the SCPs are suppressed or even disappear. The opposite holds for the spring tide phase (about two days after a new or full moon). This is quite different from the Shandong SCP, which does not display a distinct difference between spring and neap tides. Buoy observations and composite analyses with data from the Moderate Resolution Imaging Spectroradiometer (MODIS) further support this conclusion.     

Precessional forcing of tropical vegetation carbon storage

Since the Mid Pleistocene Revolution, which occurred about one million years ago, global temperatures have fluctuated with a quasi‐periodicity of ca. 100 ka. The pattern of past change in the extent of woodlands, and therefore by inference vegetation carbon storage, has been demonstrated to have a strong positive link with this global temperature change at high and mid latitudes. However, understanding of climate systems and ecosystem function indicates that the pattern of woodland change at low latitudes may follow a fundamentally different pattern. We present output from the intermediate complexity model GENIE‐1, comprising a single transient simulation over the last 800 ka and a 174‐member ensemble of 130 ka transient simulations over the last glacial cycle. These simulations suggest that while vegetation carbon storage in mid–high northern latitudes robustly follows the characteristic ca. 100 ka cycle, this signal is not a robust feature of tropical vegetation, which is subject to stronger direct forcing by the precessional (21 ka) orbital cycle (albeit with a highly uncertain response). We conclude that the correlation of palaeoenvironmental records from low latitudes with global temperature change must be done with caution. Copyright © 2011 John Wiley & Sons, Ltd.     

Fingerprinting the 8.2 ka event climate response in a coupled climate model

Using results from coupled climate model simulations of the 8.2 ka climate event that produced a cold period over Greenland in agreement with the reconstructed cooling from ice cores, we investigate the typical pattern of climate anomalies (fingerprint) to provide a framework for the interpretation of global proxy data for the 8.2 ka climate event. For this purpose we developed an analysis method that isolates the forced temperature response and provides information on spatial variations in magnitude, timing and duration that characterise the detectable climate event in proxy archives. Our analysis shows that delays in the temperature response to the freshwater forcing are present, mostly in the order of decades (30 a over central Greenland). The North Atlantic Ocean initially cools in response to the freshwater perturbation, followed in certain parts by a warm response. This delay, occurring more than 200 a after the freshwater pulse, hints at an overshoot in the recovery from the freshwater perturbation. The South Atlantic and the Southern Ocean show a warm response reflecting the bipolar seesaw effect. The duration of the simulated event varies for different areas, and the highest probability of recording the event in proxy archives is in the North Atlantic Ocean area north of 40° N. Our results may facilitate the interpretation of proxy archives recording the 8.2 ka event, as they show that timing and duration cannot be assumed to correspond with the timing and duration of the event as recorded in Greenland ice cores. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical modelling of desiccation cracking

The ability to model and predict the formation of desiccation cracks is potentially beneficial in many applications such as clay liner design, earth dam construction, and crop science, etc. However, most studies have focused on statistical analysis of crack patterns and qualitative study of contributing factors to crack development rather than prediction. Because it is exceedingly difficult to capture the nonlinear processes during desiccation in analytical modelling, most such models handle crack formation without considering variation of material properties with time, and are unattractive to use in realistic modelling. The data obtained from laboratory experiments on clay soil desiccating in moulds were used as a basis to develop a more refined model of desiccation cracking. In this study, the properties, such as matric suction, stiffness and tensile strength of soil, and base adhesion, could be expressed approximately as functions of moisture content. The initial conditions and the development of suction due to desiccation and the varying material properties were inputted to UDEC, a distinct element code, using its internal programming language FISH. The model was able to capture some essential physical aspects of crack evolution in soil contained in moulds with varying lengths, heights, and materials of construction. Extension of this methodology is potentially beneficial not only for modelling desiccation cracking in clay, but also in other systems with evolving material properties such as concrete structures and road pavements. Copyright © 2010 John Wiley & Sons, Ltd.     

Modelling the flow of self‐compacting concrete

A Lagrangian particle‐based method, smooth particle hydrodynamics (SPH), is used in this paper to model the flow of self‐compacting concretes (SCC) with or without short steel fibres. An incompressible SPH method is presented to simulate the flow of such non‐Newtonian fluids whose behaviour is described by a Bingham‐type model, in which the kink in the shear stress vs shear strain rate diagram is first appropriately smoothed out. The viscosity of the SCC is predicted from the measured viscosity of the paste using micromechanical models in which the second phase aggregates are treated as rigid spheres and the short steel fibres as slender rigid bodies. The basic equations solved in the SPH are the incompressible mass conservation and Navier–Stokes equations. The solution procedure uses prediction–correction fractional steps with the temporal velocity field integrated forward in time without enforcing incompressibility in the prediction step. The resulting temporal velocity field is then implicitly projected on to a divergence‐free space to satisfy incompressibility through a pressure Poisson equation derived from an approximate pressure projection. The results of the numerical simulation are benchmarked against actual slump tests carried out in the laboratory. The numerical results are in excellent agreement with test results, thus demonstrating the capability of SPH and a proper rheological model to predict SCC flow and mould‐filling behaviour. Copyright © 2010 John Wiley & Sons, Ltd.     

Climate change and future flows of Rocky Mountain rivers: converging forecasts from empirical trend projection and down‐scaled global circulation modelling

To predict future river flows, empirical trend projection (ETP) analyses and extends historic trends, while hydroclimatic modelling (HCM) incorporates regional downscaling from global circulation model (GCM) outputs. We applied both approaches to the extensively allocated Oldman River Basin that drains the North American Rocky Mountains and provides an international focus for water sharing. For ETP, we analysed monthly discharges from 1912 to 2008 with non‐parametric regression, and extrapolated changes to 2055. For modelling, we refined the physical models MTCLIM and SNOPAC to provide water inputs into RIVRQ (river discharge), a model that assesses the streamflow regime as involving dynamic peaks superimposed on stable baseflow. After parameterization with 1960–1989 data, we assessed climate forecasts from six GCMs: CGCM1‐A, HadCM3, NCAR‐CCM3, ECHAM4 and 5 and GCM2. Modelling reasonably reconstructed monthly hydrographs (R² about 0·7), and averaging over three decades closely reconstructed the monthly pattern (R² = 0·94). When applied to the GCM forecasts, the model predicted that summer flows would decline considerably, while winter and early spring flows would increase, producing a slight decline in the annual discharge (?3%, 2005–2055). The ETP predicted similarly decreased summer flows but slight change in winter flows and greater annual flow reduction (?9%). The partial convergence of the seasonal flow projections increases confidence in a composite analysis and we thus predict further declines in summer (about ? 15%) and annual flows (about ? 5%). This composite projection indicates a more modest change than had been anticipated based on earlier GCM analyses or trend projections that considered only three or four decades. For other river basins, we recommend the utilization of ETP based on the longest available streamflow records, and HCM with multiple GCMs. The degree of correspondence from these two independent approaches would provide a basis for assessing the confidence in projections for future river flows and surface water supplies. Copyright © 2010 John Wiley & Sons, Ltd.     

The data‐driven approach as an operational real‐time flood forecasting model

Accurate water level forecasts are essential for flood warning. This study adopts a data‐driven approach based on the adaptive network–based fuzzy inference system (ANFIS) to forecast the daily water levels of the Lower Mekong River at Pakse, Lao People's Democratic Republic. ANFIS is a hybrid system combining fuzzy inference system and artificial neural networks. Five ANFIS models were developed to provide water level forecasts from 1 to 5 days ahead, respectively. The results show that although ANFIS forecasts of water levels up to three lead days satisfied the benchmark, four‐ and five‐lead‐day forecasts were only slightly better in performance compared with the currently adopted operational model. This limitation is imposed by the auto‐ and cross‐correlations of the water level time series. Output updating procedures based on the autoregressive (AR) and recursive AR (RAR) models were used to enhance ANFIS model outputs. The RAR model performed better than the AR model. In addition, a partial recursive procedure that reduced the number of recursive steps when applying the AR or the RAR model for multi‐step‐ahead error prediction was superior to the fully recursive procedure. The RAR‐based partial recursive updating procedure significantly improved three‐, four‐ and five‐lead‐day forecasts. Our study further shows that for long lead times, ANFIS model errors are dominated by lag time errors. Although the ANFIS model with the RAR‐based partial recursive updating procedure provided the best results, this method was able to reduce the lag time errors significantly for the falling limbs only. Improvements for the rising limbs were modest. Copyright © 2011 John Wiley & Sons, Ltd.     

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.     

Copper demand,supply, and associated energy use to 2050

To a set of well-regarded international scenarios (UNEP’s GEO-4), we have added consideration of the demand, supply, and energy implications related to copper production and use over the period 2010–2050. To our knowledge, these are the first comprehensive metal supply and demand scenarios to be developed. We find that copper demand increases by between 275 and 350% by 2050, depending on the scenario. The scenario with the highest prospective demand is not Market First (a “business as usual” vision), but Equitability First, a scenario of transition to a world of more equitable values and institutions. These copper demands exceed projected copper mineral resources by mid-century and thereafter. Energy demand for copper production also demonstrates strong increases, rising to as much as 2.4% of projected 2050 overall global energy demand. We investigate possible policy responses to these results, concluding that improving the efficiency of the copper cycle and encouraging the development of copper-free energy distribution on the demand side, and improving copper recycling rates on the supply side are the most promising of the possible options. Improving energy efficiency in primary copper production would lead to a reduction in the energy demand by 0.5% of projected 2050 overall global energy demand. In addition, encouraging the shift towards renewable technologies is important to minimize the impacts associated with copper production.     

面向矿床三维动态建模的地质勘探数据库增量更新方法

针对深部找矿过程中地质勘探数据增加和动态三维地质建模需要,提出了一种基于版本管理的矿床地质勘探数据库增量更新方法。在分析矿床地质勘探工程数据与三维地质模型映射关系的基础上,建立时序版本和建模版本作为矿床勘探数据增量更新版本标识。针对矿床地质勘探数据库增量更新的版本管理,提出了一种扩展的有向无环图版本管理模型,设计了基于关系数据库的版本管理方法并探讨了其实现过程。以安徽铜陵凤凰山矿床地质勘探数据为例,基于SQL Server数据库系统建立了实例矿床地质勘探版本数据库,以C#编程实现了实例矿床勘探数据库的版本管理,包括版本的建立、查询与显示等功能,通过勘探工程增量更新版本数据建立了三维矿体的动态修正模型,证实了方法的可行性与有效性。