油气化探综合异常模糊划分动态聚类分级评价

通过选取描述油气化探综合异常的各种特征参量，借助模糊数学工具，利用最优聚类中心所具有的代表特征，建立分级指标，对油气化探综合进行分级评价。鄂尔多斯盆地油气化探综合异常的评价实例结果表明，利用油气化探综合异常各种特征参量进行动态聚类分级评价是可行的。     

土壤水力性质确定方法研究进展

介绍了确定土壤水力性质的各种直接方法(包括实验室方法和田间方法两大类)和间接方法如土壤转换函数方法、分形方法、形态学方法、数值反演方法和经验公式法等的研究进展和现状,指出了它们各自的优点和存在的不足.认为要不断地引入新的实验技术和改进测定设备,并把估计土壤水力性质的各种理论方法及实验信息有机地结合起来进行综合研究,以扩大它们的适用范围和提高预测精度.     

地震参数计算与数据传输程序设计

设计了一种地震参数计算与数据传输程序，能够通过交互方式自动完成mb、mB、MS7、MS、ML五个震级及其他相关地震参数的计算，自动生成大震速报文件，直接连接PCU速报。不仅适用于数字地震仪同时也可以用于模拟仪器(如DD—1，DK—1)解决了SSB大震速报软件数据不易改动、容易出错、速度慢等问题。同时也完善了SSDP软件参数计算功能，提高了数字测震台的效能和速报水平，充分发挥了数字地震仪的优越性。     

Compression of the North Hemisphere derived from space geodesy

Introduction With the development of global tectonics and overall detections for global tectonics with multi-geophysical methods, ones can roundly study on the geological tectonics of sampling and magnetic stripe image, so as to summarize and interpret the geometrical and kinematical charac-teristics for the distribution of the ocean and the land, and spreading state of the global tectonics in a global scale. From a comprehensive view, the South and North hemispheres are clearly unsym-metrical…     

压裂井经济分析的优化方法

水力压裂是油气井增产的一项重要技术措施。压裂效果的经济评价，实际上是一个压裂设计的优化过程。研究经济问题即为研究压裂优化问题。提出了压裂井的施工费用计算方法和贴现率、净收入、净现值的计算公式，并对压裂井进行了经济分析，给出了压裂设计优化的步骤。建立了八屋—后五家户气田压裂经济评价模型，并应用到实际施工现场。使油气单井产量比过去增加2～3倍。     

The inversion of anelastic coefficient,source parameters and site respond using genetic algorithm

It gradually becomes a common work using large seismic wave data to obtain source parameters, such as seismic moment, break radius, stress drop, with completingof digital seismic network in China (Hough, et al, 1999; Bindi, et al, 2001). These parameters are useful on earthquake prediction and seismic hazard analysis.Although the computation methods of source parameters are simple in principle and the many research works have been done, it is not easy to obtain the parameters accurately. There are two factors affecting the stability of computation results. The first one is the effect of spread path and site respond on signal. According to the research results, there are different geometrical spreading coefficients on different epicenter distance. The better method is to introduce trilinear geometrical spreading model (Atkinson, Mereu, 1992; Atkinson, Boore, 1995; WONG, et al, 2002). In addition, traditional site respond is estimated by comparing with rock station, such as linear inversion method (Andrews, 1982), but the comparative estimation will introduce some errors when selecting different stations. Some recent research results show that site respond is not flat for rock station (Moya, et al, 2000; ZHANG,. et al, 2001; JIN, et al, 2000; Dutta, et al, 2001). The second factor is to obtain low-frequency level and corner frequency fromdisplacement spectrum. Because the source spectrum model is nonlinear function,these values are obtained by eye. The subjectivity is strong. The small change of corner frequency will affect significantly the result of stress drop.     

Investigation of spatially distributed braided river flows using a two‐dimensional hydraulic model

This paper reports the application of a two‐dimensional hydraulic model to a braided reach of the Avoca River, New Zealand. Field measurements of water surface elevation, depth and velocity obtained at low flow were used to validate the model and to optimize the parameterization of bed friction. The main systematic trends in the measured flow variables are reproduced by the model. However, field data are characterized by greater spatial variability than model output reflecting differences in the scale of processes measured in the field and represented by the model. Additional model runs were conducted to simulate flow patterns within the study reach at five higher discharges. The purpose of these simulations was to evaluate the potential for using two‐dimensional hydraulic models to quantify the reach‐scale hydraulic characteristics of braided rivers and their dependence on discharge. Changes in flow depth and velocity with increasing discharge exhibit trends that are consistent with the results of previous field investigations, although the tendency for the wetted area of the braidplain within particular depth and velocity categories to remain fixed as discharge rises, as has been noted for several braided rivers in New Zealand, was not observed. Modelled shear stress frequency distributions fit gamma functions that incorporate a distribution shape parameter, the value of which follows clear systematic trends with rising discharge. These results illustrate both the problems of, and potential for, using two‐dimensional hydraulic models in braided river applications. This leads to something of a paradox in that while such models provide a means of generating hydraulic information that would be difficult to obtain in the field at an equivalent spatial resolution, they are, due to the problems inherent to data collection, difficult to validate conclusively. Despite this limitation, the application of spatially distributed models to investigate relationships between discharge and reach‐scale form and process variables appears to have considerable potential. Copyright © 2003 John Wiley & Sons, Ltd.     

观测有效性的度量方法

基于Hilbert空间理论 ,通过对观测方程的系数阵实施格拉姆_施密特 (Gram_Schmidt,G_S)正交化过程 ,分析观测的两个特性 ,从一个新的角度论证了参数估计的必要观测问题 ,以及多余观测与必要观测的关系 ;用欧氏范数‖·‖2 和Frobenius‖·‖ F 范数作为基本度量工具对观测提供参数估计的信息量进行度量分析 ,研究观测的有效性和参数估计的可靠性。采用观测空间分析方法研究了测绘学科中必要观测、多余观测等基本概念 ;提出了观测信息量、观测有效性的概念和相应的度量方法 ;从观测的空间结构出发分析参数估计系统的可靠性 ,从一个侧面扩展和丰富了测绘学中的可靠性理论 ;丰富了研究测绘学中一些基本问题的分析方法 ,也为信息学中的数据挖掘问题提供了一种分析思路     

DLT程序设计与应用

在近景摄影测量直接线性变换原理的基础上，加入附加条件建立附加有平行条件的直接线性变换函数模型，探讨了在解算过程中用数据探测法剔除粗差，用验后补偿的方法补偿系统误差的实现。鉴于非量测像机在近景摄影洲量中应用导致直接线性变换解法的重要性和实用性及数据量大、解算过程过于复杂的情况。用VC 编制了直接线性变换的解算程序，对其关键的方法和用法进行了说明。     

新疆某水利枢纽工程软弱结构面抗剪强度参数的试验研究

某水利枢纽工程位于伊犁地区,影响工程的主要问题为坝基岩体软弱结构面和断层的抗滑稳定问题。根据工程实际条件和软弱夹层特性,采取现场断层软弱结构面试验和室内模拟试验相结合,获得软弱夹层的抗剪参数。实践证明,把两种方法结合起来的试验成果可靠,尤其对一些不具备进行现场大型岩体软弱夹层抗剪试验的工程,采用室内中型直剪仪进 行剪切试验具有实用意义。