土壤水力性质确定方法研究进展

介绍了确定土壤水力性质的各种直接方法(包括实验室方法和田间方法两大类)和间接方法如土壤转换函数方法、分形方法、形态学方法、数值反演方法和经验公式法等的研究进展和现状,指出了它们各自的优点和存在的不足.认为要不断地引入新的实验技术和改进测定设备,并把估计土壤水力性质的各种理论方法及实验信息有机地结合起来进行综合研究,以扩大它们的适用范围和提高预测精度.     

压裂井经济分析的优化方法

水力压裂是油气井增产的一项重要技术措施。压裂效果的经济评价，实际上是一个压裂设计的优化过程。研究经济问题即为研究压裂优化问题。提出了压裂井的施工费用计算方法和贴现率、净收入、净现值的计算公式，并对压裂井进行了经济分析，给出了压裂设计优化的步骤。建立了八屋—后五家户气田压裂经济评价模型，并应用到实际施工现场。使油气单井产量比过去增加2～3倍。     

Investigation of spatially distributed braided river flows using a two‐dimensional hydraulic model

This paper reports the application of a two‐dimensional hydraulic model to a braided reach of the Avoca River, New Zealand. Field measurements of water surface elevation, depth and velocity obtained at low flow were used to validate the model and to optimize the parameterization of bed friction. The main systematic trends in the measured flow variables are reproduced by the model. However, field data are characterized by greater spatial variability than model output reflecting differences in the scale of processes measured in the field and represented by the model. Additional model runs were conducted to simulate flow patterns within the study reach at five higher discharges. The purpose of these simulations was to evaluate the potential for using two‐dimensional hydraulic models to quantify the reach‐scale hydraulic characteristics of braided rivers and their dependence on discharge. Changes in flow depth and velocity with increasing discharge exhibit trends that are consistent with the results of previous field investigations, although the tendency for the wetted area of the braidplain within particular depth and velocity categories to remain fixed as discharge rises, as has been noted for several braided rivers in New Zealand, was not observed. Modelled shear stress frequency distributions fit gamma functions that incorporate a distribution shape parameter, the value of which follows clear systematic trends with rising discharge. These results illustrate both the problems of, and potential for, using two‐dimensional hydraulic models in braided river applications. This leads to something of a paradox in that while such models provide a means of generating hydraulic information that would be difficult to obtain in the field at an equivalent spatial resolution, they are, due to the problems inherent to data collection, difficult to validate conclusively. Despite this limitation, the application of spatially distributed models to investigate relationships between discharge and reach‐scale form and process variables appears to have considerable potential. Copyright © 2003 John Wiley & Sons, Ltd.     

First-Order Chemistry in the Surface-Flux Layer

We have discussed the behavior of a non-conserved scalar in the stationary, horizontally homogeneous, neutral surface-flux layer and, on the basis of conventional second-order closure, derived analytic expressions for flux and for mean concentration of a gas, subjected to a first-order removal process. The analytic flux solution showed a clear deviation from the constant flux, characterizing a conserved scalar in the surface-flux layer. It decreases with height and is reduced by an order of magnitude of the surface flux at a height equal to about the typical mean distance a molecule can travel before destruction. The predicted mean concentration profile, however, shows only a small deviation from the logarithmic behavior of a conserved scalar. The solution is consistent with assuming a flux-gradient relationship with a turbulent diffusivity corrected by the Damköhler ratio, the ratio of a characteristic turbulent time scale and the scalar mean lifetime. We show that if we use only first-order closure and neglect the effect of the Damköhler ratio on the turbulent diffusivity we obtain another analytic solution for the profiles of the flux and the mean concentration which, from an experimental point of view, is indistinguishable from the first analytic solution. We have discussed two cases where the model should apply, namely NO which, by night, is irreversibly destroyed by interaction with mainly O₃ and the radioactive ²²⁰Rn. Only in the last case was it possible to find data to shed light on the validity of our predictions. The agreement seemed such that a falsification of our model was impossible. It is shown how the model can be used to predict the surface flux of ²²⁰Rn from measured concentration profiles.     

三峡工程大江截流的水文技术

鉴于三峡工程大江截流水深大，流量大，工期紧，特别是截流过程中要考虑不断航因素，因此，在大江截流和二期围堰阶段的施工进程中，应充分考虑到各方面的因素，尽可能采取一切减少大江截流和二期围堰施工难度的手段和措施，其中水文测验，水文气象预报，河道观测，水文分析与计算和水力学计算等水文工作则是为顺利实施高质量大江截流的重要条件。     

MD－50型钻机液压系统的设计

介绍了ＭＤ－５０型钻机液压系统的设计原理和主要液压元件的选择依据，并通过对设计和实践的总结，谈了作者在全液压钻机液压系统设计中的一些体会。     

一种新型自动开槽机及其控制

针对棒、管料开槽的问题，提出了一种新型全自动开槽机。介绍了该开槽机的结构和工作原理，建立全自动开槽机相适应的液压系统，搭建了开槽机继电器——控制器控制电路，实现了该设备的全自动过程控制。     

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.     

液压传感间接测量水位计的研制及其应用

压力式水位计在水文自动测报系统中很难推广的主要原因是泥沙对传感器的影响,泥沙不但会使传感器测量精度达不到测验要求,而且由于泥沙淤积还会给水位计的日常维护带来很大不便。目前进口传感器测量精度高、稳定性能好,但仍避免不了泥沙的影响。针对这一问题,提出了一种新型压力式水位计———液压传感间接测量水位计,该水位计解决了泥沙对压力式水位计的影响,是一种具有很大发展前景的水位测量仪器。     

Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.