水下多路液压快速接头的夹头结构分析与优化

深海油气田水下生产系统装备之间的精准连接是国际公认的技术难题,对接一般通过深海连接器完成。弹性夹头是水下连接器的重要组成部分,其性能关系到海洋油气生产系统的安全性和可靠性。弹性夹头的主要作用是在水下机器人的辅助下连接和锁紧连接器的固定端和移动端。采用ABAQUS软件的显式动力学分析模块计算夹头夹紧心轴这一过程中的应力、反作用力状态。三维模型仿真结果表明,锁紧过程中弹性夹头的最大应力不超过430 MPa,小于所选取的材料屈服强度480 MPa。采用正交试验和方差分析的方法研究夹头的长度、夹头与心轴的间隙等几个关键尺寸从而分析影响夹头应力和连接所需推力的最显著因素。对夹头的结构进行优化设计,同时也为夹头心轴结构的设计提供了理论依据。最后,通过试验研究对样机进行测试,测试结果表明,夹紧动作所需的最大推力在700 N以下。     

Recent increase of river–floodplain suspended sediment exchange in a reach of the lower Amazon River

We analyzed variation of channel–floodplain suspended sediment exchange along a 140 km reach of the lower Amazon River for two decades (1995–2014). Daily sediment fluxes were determined by combining measured and estimated surface sediment concentrations with river–floodplain water exchanges computed with a two‐dimensional hydraulic model. The average annual inflow to the floodplain was 4088 ± 2017 Gg yr^?1 and the outflow was 2251 ± 471 Gg yr^?1, respectively. Prediction of average sediment accretion rate was twice the estimate from a previous study of this same reach and more than an order of magnitude lower than an estimate from an earlier regional scale study. The amount of water routed through the floodplain, which is sensitive to levee topography and increases exponentially with river discharge, was the main factor controlling the variation in total annual sediment inflow. Besides floodplain routing, the total annual sediment export depended on the increase in sediment concentration in lakes during floodplain drainage. The recent increasing amplitude of the Amazon River annual flood over two decades has caused a substantial shift in water and sediment river–floodplain exchanges. In the second decade (2005–2014), as the frequency of extreme floods increased, annual sediment inflow increased by 81% and net storage increased by 317% in relation to the previous decade (1995–2004). Copyright © 2017 John Wiley & Sons, Ltd.     

风浪背景下舰船水压场信号的自适应AR模型预测滤波

为了有效地从风浪背景中检测舰船水压信号,首先根据舰船水压信号和波浪噪声的特点以时间序列的AR模型理论为依据,导出一种便于实现的自适应滤波器结构,并用NFTF自适应算法实现对舰船水压信号的预测滤波,取得了明显的效果.计算机仿真实验结果表明,给出的方法对抗波浪干扰具有良好的性能.     

Granite is an Effective Helium Source Rock: Insights from the Helium Generation and Release Characteristics in Granites from the North Qinling Orogen,China

Global helium(He) shortage is a challenging problem; however, the types of helium source rock and the mechanisms of He generation and release therein remain still poorly understood. In this study, in order to evaluate the potential of granite as an effective helium source rock, we collected granitic samples from the North Qinling Orogen, Central China, in the south of the helium-rich Weihe Basin. The helium generation and release behaviors in granite were studied through analysis of U and Th concentrations, EMPA images, and He and Ar concentrations and isotopic ratios extracted by crushing and stepwise heating. The results indicate that Ar has a better retention and a lower mobility than He. 3 He/4 He ratios released by crushing and stepwise heating are 0.016–0.056 RA and 0.003–0.572 RA, respectively, where RA is the atmospheric 3 He/4 He of 1.4×10-6, reflecting a crustal and radiogenic source. Helium concentrations extracted by the two ways are 0.13–0.95 ucm3 STP/g and 7.82–115.62 ucm3 STP/g, respectively, suggesting that matrix-sited He accounts for more than 98% of total helium preserved in granite. In addition, the total generated He amounts in granites are calculated based on the measured U and Th concentrations in granitic samples. Dividing the preserved He quantities by the generated He amounts, it turned out that less than 10% of He produced since the formation of the granite is preserved in the rock over geological time, suggesting that more than 90% generated He can be transferred to the Weihe Basin. Temperature and fracture are the two critical factors controlling He release. Based on the relationship between He diffusivity of granites and temperature and the He closure temperatures of a variety of U-and Th-rich minerals(27–250°C), we estimate that He can be partially released out of granite at the depths 400 m and totally released at the depths 7800 m. Fractures provide effective transfer of free He from deep source rocks to shallow reservoirs. Finally, a model on granite as an effective helium source rock is established. We suggest exploring He resources in hydrocarbon basins with granitic basement(or adjacent to granite bodies), high geothermal field, and young active fractures.     

The influence of subsurface moisture on rill system evolution

Rill development studies have focused almost exclusively on surface erosion processes and critical threshold hydraulic conditions. Characteristic rill features, such as arcuate headcuts and knickpoints, are morphologically similar to the ‘theatre-headed’ valleys which have been associated with ‘sapping’ processes at various scales. This paper reports on laboratory experiments designed to identify linkages between surface flow hydraulics, subsurface moisture conditions and rill development. Experiments were carried out in a 16·57 m² flume under simulated rainfall with soil samples up to 0·15 m depth in which moisture conditions were monitored by miniature time-domain reflectometer probes. Tests showed complex responses in which some rill incision reflected surface flow conditions, but major rill system development with markedly enhanced sediment yield was closely associated with high soil moisture contents. It was not possible to measure seepage forces directly, but calculation and observation indicate that these were less important than reduction in soil strength with saturation, which resulted in increased effective runoff erosivity. This caused concentrated undercutting along the water table at rill walls, while slightly stronger surface layers above the water table formed microscarps. These retreated along the water table into interrill surfaces, producing residual pediment transport slopes. The microscarps eventually disappeared when the water table reached the surface, eliminating differential soil strength. The experiments showed complex relationships between surface and subsurface erosional processes in evolving rill systems, strongly influenced by soil moisture dynamics. The very small topographic and hydraulic head amplitudes indicate that seepage forces and ‘sapping’ were minimal. The dominant effect of soil moisture was reduction of soil strength with saturation, and increased runoff entrainment. Experimental conditions were not unusual, either for agricultural fields or natural hillslopes, and the intricate interrelationship of surface and subsurface erosion processes observed is probably not uncommon. Attempts to link specific morphologic features at rill scale to dominance of surface or subsurface processes alone are therefore unlikely to be successful or reliable. © 1998 John Wiley & Sons, Ltd.     

渭河河漫滩宏观弥散度计算

宏观弥散度的确定对地下水溶质运移至关重要。利用竖管法野外现场测定900个点的垂向饱和渗透系数Kv值,然后进行统计分布检验,运用地质统计学中负指数模型在有块金效应影响的条件下拟合出ln Kv的空间相关尺度λ值,进而利用λ与宏观弥散度关系式求解渭河漫滩非饱和带的宏观弥散度。结果表明,研究区整体Kv平均值为0.012cm/s,方差为1.33,表明Kv空间差异性较大;垂向渗透系数基本服从对数正态分布规律,满足宏观弥散度计算条件;估算整体纵向宏观弥散度为21.27m,各排计算结果约2.11~4.65m。     

典型风力条件及水力调度下太湖藻华高频时空动态监测

湖泊藻华问题已成为全球水生态环境领域面临的长期挑战,风力条件变化和引调水工程的水力调度能改变湖体水动力结构,对藻类的生长和聚集过程产生影响,进行该过程的精细化监测和机制分析对于湖泊藻华预报预警和应急处置具有重要意义。本研究基于Hiamwari-8/AHI卫星遥感高频监测数据,对比分析了归一化差异植被指数(NDVI)、增强植被指数(EVI)和浮游藻类指数(FAI) 3种不同指数对太湖藻华的反演效果,开展了典型风力条件下和水力调度下太湖藻华生消过程的持续监测分析。结果表明,FAI对藻华区域和非藻华区域的区分更加明显,其阈值提取的藻华面积与基于MODIS图像解译的藻华面积的相对误差最低,为-2.27%。当营养盐充足且水温持续保持在蓝藻大量生长增殖的阈值以上时,风力条件是导致太湖藻类迁移聚集的关键因子,风向主要影响藻类的水平迁移,使其进行方向性迁移并逐渐形成大面积藻华区域。风速主要影响藻类的垂向迁移并存在临界阈值,当风速低于约2.5 m/s的临界风速时,藻华面积随风速增加而增加;当风速高于临界风速时,藻华面积随风速增加而降低。水力调度对距离较近的贡湖湾区域具有显著影响,主要通过水动力扰动来影响...     

Compartmentalisation and groundwater–surface water interactions in a prospective shale gas basin: Assessment using variance analysis and multivariate statistics on water quality data

An environmental concern with hydraulic fracturing for shale gas is the risk of groundwater and surface water contamination. Assessing this risk partly involves the identification and understanding of groundwater–surface water interactions because potentially contaminating fluids could move from one water body to the other along hydraulic pathways. In this study, we use water quality data from a prospective shale gas basin to determine: if surface water sampling could identify groundwater compartmentalisation by low-permeability faults; and if surface waters interact with groundwater in underlying bedrock formations, thereby indicating hydraulic pathways. Variance analysis showed that bedrock geology was a significant factor influencing surface water quality, indicating regional-scale groundwater–surface water interactions despite the presence of an overlying region-wide layer of superficial deposits averaging 30–40 m thickness. We propose that surface waters interact with a weathered bedrock layer through the complex distribution of glaciofluvial sands and gravels. Principal component analysis showed that surface water compositions were constrained within groundwater end-member compositions. Surface water quality data showed no relationship with groundwater compartmentalisation known to be caused by a major basin fault. Therefore, there was no chemical evidence to suggest that deeper groundwater in this particular area of the prospective basin was reaching the surface in response to compartmentalisation. Consequently, in this case compartmentalisation does not appear to increase the risk of fracking-related contaminants reaching surface waters, although this may differ under different hydrogeological scenarios.     

Thresholds for post-wildfire debris flows: Insights from the Pinal Fire,Arizona, USA

Wildfire significantly alters the hydrologic properties of a burned area, leading to increases in overland flow, erosion, and the potential for runoff-generated debris flows. The initiation of debris flows in recently burned areas is well characterized by rainfall intensity-duration (ID) thresholds. However, there is currently a paucity of data quantifying the rainfall intensities required to trigger post-wildfire debris flows, which limits our understanding of how and why rainfall ID thresholds vary in different climatic and geologic settings. In this study, we monitored debris-flow activity following the Pinal Fire in central Arizona, which differs from both a climatic and hydrogeomorphic perspective from other regions in the western United States where ID thresholds for post-wildfire debris flows are well established, namely the Transverse Ranges of southern California. Since the peak rainfall intensity within a rainstorm may exceed the rainfall intensity required to trigger a debris flow, the development of robust rainfall ID thresholds requires knowledge of the timing of debris flows within rainstorms. Existing post-wildfire debris-flow studies in Arizona only constrain the peak rainfall intensity within debris-flow-producing storms, which may far exceed the intensity that actually triggered the observed debris flow. In this study, we used pressure transducers within five burned drainage basins to constrain the timing of debris flows within rainstorms. Rainfall ID thresholds derived here from triggering rainfall intensities are, on average, 22 mm h⁻¹ lower than ID thresholds derived under the assumption that the triggering intensity is equal to the maximum rainfall intensity recorded during a rainstorm. We then use a hydrologic model to demonstrate that the magnitude of the 15-min rainfall ID threshold at the Pinal Fire site is associated with the rainfall intensity required to exceed a recently proposed dimensionless discharge threshold for debris-flow initiation. Model results further suggest that previously observed differences in regional ID thresholds between Arizona and the San Gabriel Mountains of southern California may be attributed, in large part, to differences in the hydraulic properties of burned soils. © 2019 John Wiley & Sons, Ltd.     

Revisiting the morphological method in two-dimensions to quantify bed-material transport in braided rivers

Research in the 1990s showed that bed-material transport rates could be estimated at the reach scale in both one-dimension and, over small spatial scales (10s of m), in two-dimensions. The limit on the latter was the spatial scale over which it was possible to obtain distributed data on morphological change. Here, we revisit the morphological method given progress in both topographical data acquisition and hydraulic modelling. The bed-material transport needed to conserve mass is calculated in both one and two dimensions for a 1600 m × 300 m Alpine braided river “laboratory”. High-resolution topographical data were acquired by laser scanning to quantify Digital Elevation Models (DEMs), and morphological changes caused by the flushing of the water intake were derived from repeated surveys. Based on DEMs of differences, 1D bed-material transport rates were calculated using the morphological method. Then, a 2D hydraulic model was combined with a topographic correction to route sediment through the network of braided channels and to obtain a spatially variable estimate of transport in both downstream and cross-stream directions. Monte Carlo simulation was applied to the routing model parameters, allowing identification of the most probable parameter values needed to minimize negative transport. The results show that within-section spatial compensation of erosion and deposition using the 1D treatment leads to substantial local errors in transport rate estimates, to a degree related to braiding intensity. Even though the 2D application showed that a large proportion of the total transport was actually concentrated into one main channel during the studied low flow event, the proportion of transport in secondary anabranches is substantial when the river starts braiding. Investigations of the effects of DEM resolution, competent flow duration and survey frequency related to ‘travelling bedload’ and sequential erosion-deposition emphasized the critical importance of careful data collection in the application of the morphological method. © 2019 John Wiley & Sons, Ltd.