Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.     

Premelting and calcium mobility in gehlenite (Ca2Al2SiO7) and pseudowollastonite (CaSiO3)

 Premelting effects in gehlenite (Ca₂Al₂SiO₇) have been studied by Raman spectroscopy and calorimetry, and in gehlenite and pseudowollastonite (CaSiO₃) by electrical conductivity. The enthalpy of premelting of gehlenite is 17.3 kJ mol⁻¹ and represents 9% of the reported enthalpy of fusion, which is in the range of the reported fraction of other minerals. The Raman and electrical conductivity experiments at high temperatures, for gehlenite and pseudowollastonite, show that the premelting effects of both compositions are associated with enhanced dynamics of calcium atoms near the melting point. This conclusion agrees with the results obtained for other minerals like diopside, but contrasts with those found for sodium metasilicate in which the weaker bonding of sodium allows the silicate framework to distort near the melting temperature and deform in such a way to prefigure the silicate entities present in the melt. Received: 30 April 2002 / Accepted: 7 August 2002 Acknowledgements We thank Y. Linard for help with DSC measurements and two anonymous reviewers for their constructive comments. This work has been partly supported by the EU Marie-Curie fellowship contract no. HPMF-CT-1999-00329, the CNRS-Carnegie Institution of Washington program PICS no.192, and the NSF grants EAR-9614432 and EAR-9901886 to B.O.M.     

Fluid permeability of sedimentary rocks in a complete stress–strain process

The permeability of sedimentary rocks during triaxial compression tests was investigated to relate it to the complete strain–stress process. It was found that the permeability was not constant, but varied with the stress and strain states in the rocks. Prior to the peak strength, the permeability decreases with increasing load. A dramatic increase in permeability occurs during the strain softening period. In the present study, in situ measurements of fluid flow and pressure in floor strata was carried out in a double longwall mining face in the Yangzhuang colliery. These measurements show that both the strata pressure and the position with respect to the mining face influence the hydrogeologic properties. The permeability increased in the floor strata behind the mining face because those mining induced fractures opened as the strata pressure decreased. To better understand this change in hydraulic behavior around the mining faces, 3-D numerical modeling was carried out. The model provides the general picture of the stress distribution and failure zone both in the floor and roof strata. The field and model results demonstrate the importance of changes in the stress and strain states on the hydrogeology of a site.     

A method to estimate hydraulic conductivity while drilling

A field test and analysis method has been developed to estimate the vertical distribution of hydraulic conductivity in shallow unconsolidated aquifers. The field method uses fluid injection ports and pressure transducers in a hollow auger that measure the hydraulic head outside the auger at several distances from the injection point. A constant injection rate is maintained for a duration time sufficient for the system to become steady state. Exploiting the analogy between electrical resistivity in geophysics and hydraulic flow two methods are used to estimate conductivity with depth: a half-space model based on spherical flow from a point injection at each measurement site, and a one-dimensional inversion of an entire dataset.

The injection methodology, conducted in three separate drilling operations, was investigated for repeatability, reproducibility, linearity, and for different injection sources. Repeatability tests, conducted at 10 levels, demonstrated standard deviations of generally less than 10%. Reproducibility tests conducted in three, closely spaced drilling operations generally showed a standard deviation of less than 20%, which is probably due to lateral variations in hydraulic conductivity. Linearity tests, made to determine dependency on flow rates, showed no indication of a flow rate bias. In order to obtain estimates of the hydraulic conductivity by an independent means, a series of measurements were made by injecting water through screens installed at two separate depths in a monitoring pipe near the measurement site. These estimates differed from the corresponding estimates obtained by injection in the hollow auger by a factor of less than 3.5, which can be attributed to variations in geology and the inaccurate estimates of the distance between the measurement and the injection sites at depth.     

The experimental studies on electrical con-ductivities and P-wave velocities of anortho-site at high pressure and high temperature

Introduction The measurements of the compressional wave velocity and electrical conductivity of minerals and rocks are of fundamental importance to look into the earths interior, including composition, geotherm, generation and distribution of fluids and melts. Hydrous minerals formed by metamatu-siom are abundant within the earth. Previous studies have been carried out on the dehydration effect on the electrical conductivity and wave velocity of rocks such as serpentine, amphibole, most of whi…     

近几十年来西北江三角洲网河区顶点的河相关系

据西北江三角洲网河区顶点马口、三水两水文站1959－1988年的实测大断面、流量、流速和水位资料，采用Leopold的水力几何形态关系建立断面河相关系，探讨两水文观测断面的河相关系特征、年际变化及河相关系的差异。河相关系表明，西北江三角洲的断面水力几何形态指数β1值相对较小，而β3值相对较大，代表了珠江特有的丰水少沙河流的河相关系。