Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

The Effect of Concrete Deformation on Displacement of an Axially Loaded Drilled Shaft

This article presents the settlement of drilled shafts resulting from their structural deformations. Although drilled shafts are widely used as foundations for settlement-sensitive structures such as bridges and high-rise buildings, the structural deformations of drilled shafts are not typically taken into account in the design process. However, if unexpected structural deformations of drilled shafts cause additional settlement to the foundation, the serviceability of the superstructure can be jeopardized. Unfortunately, very few research efforts have been made to quantify the structural deformation of drilled shafts; this needs to be addressed to accurately predict the settlement of drilled shafts. In this study, we investigate the effect of structural deformation on displacement of axially loaded drilled shafts. Finite element analyses were performed to quantify the structural deformation of drilled shafts. The analysis results indicated that the structural deformation of drilled shafts could be quite significant for long drilled shafts. The main factors that affected the structural deformation of drilled shafts were found to be pile length, the material properties of drilled shafts, and the relative humidity of surrounding soil. An approximate equation is proposed to estimate the long-term deformation of drilled shafts.     

苏里格大型致密砂岩气田储层结构与水平井提高采收率对策

在分析苏里格气田辫状河体系及储层结构特征的基础上,提出了剖面储量集中度的概念,建立了厚层块状型、垂向叠置泛连通型、分散局部连通型、分散孤立型4种砂体分布模式,探讨了不同储层结构下的水平井采出程度,提出了水平井提高采收率技术对策。研究结果表明,辫状河沉积体系复合有效砂体由于“阻流带”的存在,直井动用不完善,水平井能克服“阻流带”的影响,提高层内储量动用程度;但由于砂体多层状分散分布,水平井开发会导致纵向含气层系储量动用不充分,影响层间采出程度。对于剖面储量集中度高的厚层块状型、垂向叠置泛连通型储层,采用水平井整体开发,Ⅰ+Ⅱ类井比例达70%以上,可显著提高储量动用程度和采收率。对于剖面储量集中度低的分散局部连通型储层,采用直井井网开发后进行甜点式优选水平井井位加密部署,可提高采收率10%以上。     

A Preliminary Study on the Soft–Sediment Deformation Structures in the Late Quaternary Lacustrine Sediments at Tashkorgan, Northeastern Pamir, China

This study identified soft–sediment deformation structures(SSDS) of seismic origin from lacustrine sediments in the late Quaternary paleo–dammed lake at Tashkorgan, northeastern Pamir. The observed deformation structures include sand dykes, liquefied diapir and convolute structures, gravity induced SSDS, and thixotropic pillar and tabular structures. We conducted a preliminary study on the morphology, formation and trigger mechanisms of pillar and tabular structures formed by liquefaction of underlying coarse sand and thixotropy of the upper silty clay. The regional tectonic setting and distribution of lacustrine strata indicate that the most probable trigger for the SSDS in lacustrine sediments was seismic activity, with an approximate earthquake magnitude of M6.0; the potential seismogenic fault is the southern part of the Kongur normal fault extensional system. AMS 14 C dating results indicate that the SSDS were formed by seismic events occurring between 26050±100 yr BP and 22710±80 yr BP, implying intense fault activity in this region during the late Pleistocene. This study provides new evidence for understanding tectonic activity and regional geodynamics in western China.     

红河油田低压易漏地层水平段固井技术

为提高红河油田水平井固井质量,满足后期分段压裂需求,对红河油田水平井固井技术进行了研究。针对红河油田水平段固井技术难点,通过室内和现场试验,优选出了GSJ水泥浆体系,基于实测地层压力与地层破裂压力,进行平衡压力固井设计确定了环空浆体结构,为提高顶替效率,优化了扶正器类型与加放位置,专业软件模拟表明套管居中度＞73%,良好的井眼准备和套管漂浮措施确保了管柱的顺利下入;加长胶塞、树脂滚轮刚性旋流扶正器和关井阀等附件的使用,保证了固井质量。现场应用53口水平井,水泥浆全部返至地面,CBL测井结果表明,固井优良率达81.13%。该固井技术成功应用于红河油田水平井中,保证了固井质量,满足了后期分段压裂的需要。     

考虑方位漂移的水平井井眼轨道设计

目前,深层页岩气水平井在钻井过程中经常出现方位漂移的问题,方位漂移严重影响了水平井的井眼轨迹控制,进而影响水平井的准确中靶。在现场施工中,通常根据施工区以前的钻井经验,在进行定向造斜时,先估计出一个“方位超前角”,这种现场的做法有着很大的不确定性,并且可能出现较大误差。本文提出了考虑方位漂移的水平井井眼轨道优化设计的方法,解决了仅凭现场经验给出的“超前角”不准确的问题。考虑方位漂移的水平井井眼轨道优化设计按照井段划分,将地层因素与井身剖面结合起来求取井段的平均方位漂移率。根据该方法研制开发了考虑方位漂移的水平井井眼轨道优化设计软件,并通过举例进行了验证,证明了方法是可行的。     

地质导向技术在L型煤层气水平井 T-P05井中的应用

通过分析山西L型煤层气水平井的技术难点,着重建立造斜着陆与水平段导向两大导向模型,形成了以标志层划分与对比、地层倾角推算、地质建模和实时轨迹控制四个方面为主的L型煤层气水平井地质导向技术流程,该技术在T-P05井的成功应用,不仅丰富了煤层气水平井地质导向技术的内容与方法,更进一步验证了该技术在现场具有较强的可操作性和良好的应用前景,值得大力推广。     

隆页2HF页岩气水平井钻井技术研究与实践

四川盆地周缘蕴藏有大面积常压低丰度海相页岩气,依目前的开发成本,储量难以动用,亟需开展低成本钻井工程工艺技术攻关,盘活该类页岩气资源。中石化华东油气分公司在渝东南武隆地区从钻、测、录、固等方面开展了低成本钻井技术研究。通过分析导致钻井成本高的原因,重点从井身结构优化、井眼轨迹控制优化、钻井工具优选、防漏堵漏措施以及测井、录井、固井工艺优化等方面进行了技术研究与现场实践,试验井隆页2HF井由导眼井与侧钻水平井两部分构成,钻井成本较邻井降低了30%,为武隆地区常压页岩气开发奠定了基础。     

Neotectonics of the Kharaulakh sector of the Laptev Shelf

Seismotectonic deformation and crustal stress pattern have been studied comprehensively in major seismogenic structures of the Kharaulakh sector of the Verkhoyansk fold system and adjacent parts of the Chersky seismotectonic zone. The study focuses on neotectonic structures, deep structure, and systems of active faults, as well as tectonic stress fields inferred by tectonophysical analysis of Late Cenozoic faults and folds. The results, along with geological and geophysical data, reveal main strain directions and structural patterns of crustal stress and strain in the Arctic segment of the Eurasia-North America plate boundary. The area is a junction of mid-ocean and continental structures evolving in a mixed setting of extension, compression, and their various combinations. The rotation pole of the two plates is presumably located near Buor-Khaya Bay. In this case, extension is expected to act currently upon the neotectonic structures north of the bay and compression to control those in the south and southeast. This inference is consistent with the identified zoning of stress and strain in the Kharaulakh sector.     

Seismicity and fault aseismic deformation caused by fluid injection in decametric in-situ experiments

Seismicity induced by fluid perturbations became an important societal concern since felt earthquakes (M_w up to 6) occurred after anthropogenic activities. In order to mitigate the risks associated with undesired seismicity, as well as to be able to use the micro-seismicity as a probe for in-depth investigation of fluid-driven processes, it is of crucial importance to understand the links between seismicity, fluid pressure and flow. We have developed a series of in-situ, decameter-scale experiments of fault zone reactivation by controlled fluid injection, in order to improve the near-source geophysical and hydromechanical observations. The deployed geophysical monitoring close to the injection allows one to cover the full frequency range of the fault responses from the static deformation to the very high-frequency seismic emissions (up to 4 kHz). Here, we focus on the microseismicity (M_w ∼ –4 to –3) recorded during two fluid injection experiments in low-permeable shale and highly-fractured limestone formations. In both experiments, the spatio-temporal distribution of the seismic events, the energy balance, and the seismic velocity changes of the fractured medium show that most of the deformation does not actually emit seismic signals. The induced deformation is mainly aseismic. Based on these high-resolution multiparametric observations in the near-field, we therefore proposed a new model for injection-induced seismicity: the seismicity is not directly induced by the increasing fluid pressure, but it is rather triggered by the stress perturbations transferred from the aseismic motion caused by the injection.