H020U井钻进所遇问题及处理方法

土耳其贝帕扎里天然碱矿H020U井在造斜钻进和水平钻进过程中遇到井漏、钻头钻遇硅化灰岩层磨损严重、未绕过第一靶点V020而打中套管、井涌、仪器掉入裸眼、钻遇未知溶腔导致顶角下降,方位偏离而导致未直接连通第二靶点等问题。针对这些问题进行了分析,并提出了相应的处理方法,最后成功地使H020U井连通第一靶点V020井和第二靶点V020U井。     

多重散射问题的改进算法以及双排非连续弹性屏障对水平向剪切波的隔离研究

与Aviles等学者的多重散射隔振理论相比较,采用更为完整的Fourier-Bessel函数系的级数展开表达式来研究弹性波入射下的多重散射问题。引入Graf加法定理,并结合位移和应力边界条件,推导了无限均匀弹性介质中任意分布的多个弹性圆柱体对于平面水平向剪切波(SH波)入射时散射系数的理论解析解。随后,取圆柱体分布于两条相互平行的直线上,则问题演变为双排弹性桩屏障对于弹性波的隔离问题。引入无量纲位移(屏障后土体总的位移与仅由入射平面水平向剪切波引起的位移的比值)和透射系数(屏障宽度范围内无量纲位移的几何平均值)的概念来研究屏障的隔振效果。重点讨论了双排桩间距h以及桩土的剪切模量比ξ对于屏障整体隔振效果的影响,阐述了双排桩屏障的隔振性状。特别地,当h=0时,该问题退化为常见的单排非连续屏障的隔振问题。     

井筒与油藏耦合的压裂水平井非稳态产能计算模型

为了准确预测压裂水平井的产量,综合考虑流体在储层、井壁、压裂裂缝、射孔孔眼以及水平井筒中的流动过程,根据势叠加原理,建立了考虑射孔孔眼、压裂裂缝生产干扰作用下的井筒、油藏耦合压裂水平井非稳态产能计算模型。结果表明:只考虑裂缝生产与裂缝、孔眼同时生产时的水平井产量在生产初期差别较大,生产后期差别变小;由于裂缝、孔眼的干扰,水平井筒两端裂缝的产量高于中间裂缝的产量;由于井筒摩阻作用,关于水平井筒中心对称的裂缝流量不相等;随着裂缝长度增加,裂缝、射孔孔眼、水平井产量增大;随着裂缝导流能力增加,裂缝产量增大,射孔孔眼产量降低,水平井产量增大;射孔段越长,孔眼与裂缝的干扰愈强,单个孔眼的产量降低,但由于射孔数增加,水平井产量增大;射孔深度增加,压裂水平井产量增加。     

南海神狐海域天然气水合物注热降压开采数值模拟研究

针对南海神狐海域天然气水合物成藏条件,利用pT+H软件和水平井技术对天然气水合物的注热和注热降压开采效果进行了模拟分析。重点讨论了注入热水温度为30、60、90℃时水合物饱和度以及CH4气体饱和度、CH4产气率、累积CH4产气量和产水量的变化规律,发现两种开采模式下水合物低饱和度分布范围随时间增长和温度升高而增大;CH4产气率在开采10 d内升高较快,之后逐渐减小。模拟结果表明:注热降压开采模式比单纯注热模式的效果有较大改善,而且温度对于提高CH4产气量效果不明显,但因为天然气水合物藏的低渗透性,神狐海域的天然气水合物的CH4产气量不大。研究结果可为南海神狐海域和类似地区天然气水合物开采提供参考。     

水平井开发储层地质建模

水平井的开发技术关键之一是建立油气藏的精细三雏地质模型,据此可以确定明确的地质目标.常规的储层地质建模忽视了水平井与地层在空间上的独特配置关系,无法体现和充分利用其在表征储层属性空间展布特征上的优势.这里着重讲述了针对水平井开发的储层地质建模,引入了水平井储层概念模型,探讨了平面单元网格划分模式,并以塔河1区三叠系下油...     

地层不整合遮挡油气藏地质储量计算新方法及其应用

从几何学的观点出发,针对纯油藏和具有气顶的油气藏,采用单储系数、横截面面积与油层横向分布长度三者乘积的方式改进采用单储系数、含油面积与油层厚度三者乘积方式的传统容积法,提出相应的地层不整合遮挡油气藏地质储量计算新公式,并根据油气藏的特点提出水平井钻遇油气藏厚度的预测公式。地层不整合遮挡油气藏的地质储量计算目前主要采用容积法,这类方法不仅计算繁琐,而且不确定因素较多;改进后的新方法计算简单方便,理论性更强,存在的不确定因素显著减少。采用新方法在高青油田高424块高424-1井区进行了实践应用。实践表明:改进的新方法适用于地层不整合遮挡油气藏的地质储量计算及预测水平井钻遇油气藏厚度。     

Stress state in the Cuu Long and Nam Con Son basins, offshore Vietnam

The results presented in this paper are the first published estimates of the complete stress tensor in the Cuu Long and Nam Con Son basins, offshore Vietnam. We analysed in situ stress and pore pressure fields in the sedimentary formations using data from petroleum exploration and production wells to evaluate the stress state in these basins. The data were obtained from the seafloor to 4300 m burial depth and include both hydrostatic and overpressured sections. Minimum horizontal stresses were obtained from extended leak-off tests and mini-fracture tests. Maximum horizontal stresses were estimated from drilling-induced fracture parameters and borehole breakout widths in twelve wells using rock properties measured in the laboratory or estimated empirically from wireline logs. Seven data points are located in sediments, and seventeen data points in igneous basement rocks at depths greater than 3000 m.The estimated magnitudes of σ_H are 70-110% of the σ_v magnitudes. Considering the errors in the stress magnitude estimates, their relative magnitudes suggest that a borderline normal/strike-slip stress regime presently exists in normally pressured sequences of the Nam Con Son and Cuu Long basins. Of the twenty-four data points, twenty have effective stress ratios at a critical stress state for faulting on the assumption that there are faults present that are optimally oriented for failure with friction coefficients of ∼0.5. The results suggest that the stress state in these basins is generally critical.     

Depth dependency of stress ratios during the sedimentation of NW Gyeongsang Basin (Cretaceous), southeast Korea: Estimate of stress parameters and timing of tectonic episodes

The natural stress state in the lithosphere consists of the vertical load and Poisson ratio, and then additional horizontal compression and extension (denoted by Δσ_H and Δσ_T, respectively) are assumed to be superimposed upon this gravitational stress field. The resulting stress state is composed of the maximum, medium and minimum stresses denoted by σ₁, σ₂, and σ₃, respectively. The stress ratio is given as Φ = (σ₂ − σ₃)/(σ₁ − σ₃). A linear relation is found between Φ or 1/Φ and the vertical load in wrench-faulting and extensional stress regimes, respectively. The slope and intercept of the linear relation result in the additional horizontal stresses and level of (average) paleo-surface, respectively. Stress ratio is also determinable by the stress tensor inversion of fault-slip data. The earliest tectonic event (T_1 Event) in the Cretaceous Gyeongsang Basin consists of coexisting E–W compression and N–S extensional faulting episodes. Plots of Φ or 1/Φ against the burial depth (or vertical load) display several linear trends: two clusters in extensional episodes, and two or three clusters in wrench-faulting episodes. Because Δσ_H is assumed to be null or negligible in the extensional regime, Δσ_T is determinable from the slopes of two linear clusters as being −2.5 to −4.0 MPa. In wrench-faulting episodes, the values of Δσ_H are given to be 61.6–101.4 MPa by applying determined additional horizontal extensions. Determined levels of average paleo-surfaces and those of syndepostional structures illustrate that more than five wrench-faulting or extensional episodes have occurred during the T_1 Event, whose active age, consequently, ranges from the Barremian to the Coniacian. This supports that the coexisting coaxial faulting episodes with the same extension may correspond to the alternation of wrench-faulting and extensional episodes.     

Pipe-soil shear interaction stiffness in horizontal directional drilling and pipe bursting

During horizontal directional drilling and pipe bursting installations, the shear forces between the pipe and the surrounding soil play a major role in the tensile loads and stresses experienced by the pipe. The magnitudes and variations in the shear forces are controlled by the pipe-soil interaction characteristics. This paper discusses the shear interaction between the pipe and the soil during those trenchless installations. A pipe-soil interaction mechanism is described that quantifies the relationship between the shear force and shear displacement, as well as the shear force at which sliding takes place. A simple analytical approach, as well as a finite element procedure, is employed to provide guidelines on practical values of the pipe-soil interaction stiffness and to investigate the effect of some soil and geometric parameters on the interaction stiffness magnitude.     

胜利油田第一口绕锥水平井钻井技术

胜利油田永3断块是典型的复杂小断块油藏,为进一步对该类型油藏进行挖潜,在仔细分析剩余油富集模式的基础上,决定在合适位置部署绕锥水平井。在分析了永3断块储层特点的基础上,介绍了永3断块第一口绕锥水平井——永3平6井的基本设计及施工情况,阐述了绕锥水平井钻井的技术难点和采取的技术措施。该井的成功实施及顺利投产,证明了绕锥水平井适合胜利油田东部老油区剩余油的进一步挖潜,具有推广价值。