Multiple longshore sand bars in the upper Chesapeake Bay

In the upper Chesapeake Bay (Maryland, U.S.A.) field surveys were conducted at 18 multiple longshore sand bar sites. The multiple bar systems were found in water depths less than approximately 2 m (mean sea level), and exhibited mild bottom slopes of 0·0052 or less. The number of bars composing each system ranged from four to 17 and the spacing between the crests typically increased in the offshore direction, ranging from 12 to 70 m. Bar height also typically increased with distance offshore and ranged from 0·03 to 0·61 m. A grain size analysis of crest and trough sediment did not reveal any significant differences and the sediment was categorized as ‘fine sand’. A review of the literature data indicated that the Chesapeake Bay multiple bars possessed similar characteristics to those found in Gelding Bay (Baltic Sea); similarities in fetch, wave height and tidal range between the two bays may account for this finding. The surf-scaling parameter indicated that the multiple bar systems were extremely dissipative with regard to wave energy, and wave height appeared to be an important factor in controlling bar spacing and bar height. A multiple wave break point hypothesis was discussed as a possible mechanism for the formation of Chesapeake Bay multiple longshore bars, and limited observational evidence appeared to support such a mechanism.     

Numerical Simulation of Wave Field near Submerged Bars by PLIC-VOF Model

Investigating the wave field near structures in coastal and offshore engineering is of increasing significance. In the present study, simulation is done of the wave profile and flow field for waves propagating over submerged bars, using PLIC-VOF （Pieeewise Linear Interface Construction） to trace the free surface of wave and finite difference method to solve vertical 2D Navier-Stokes （N-S） equations. A comparison of the numerical results for two kinds of submerged bars with the experimental ones shows that the PLIC-VOF model used in this study is effective and can compute the wave field precisely.     

GIS支持下的长江口拦门沙泥沙冲淤定量计算

依据1842～1997年10幅不同年代的长江口海图资料,利用地理信息系统和数字化仪进行处理,建立不同时期的长江口水下数字高程模型,以此作为基础资料,实现了从横剖面、深泓线纵剖面、平面变化等不同角度对长江口拦门沙地区滩槽演变、岸线侵蚀、沙岛形成与变迁等进行研究.通过计算河槽容积,实现了对不同时段泥沙冲淤量的计算.结果表明,155a来拦门沙总的趋势是不断淤积,但不同时期淤积速度大不一样,个别时期甚至会发生一定程度的冲刷,这主要与动力条件的波动有关.1842～1997年,共淤积泥沙38.10亿t,平均每年淤积0.246亿t,约占长江来沙的5%,年均淤厚为1.1cm泥沙淤积部位主要在九段沙、横沙及横沙东滩、崇明东滩三处.发生冲刷的范围较小,仅占总面积的21.4%,主要在北槽,北港上段和南槽局部也有轻微的冲刷发生.     

Morphodynamics of intertidal bars on a megatidal beach, Merlimont, Northern France

The morphology, bedforms and hydrodynamics of Merlimont beach, in northern France, characterised by intertidal bars and a spring tidal range of 8.3 m, were surveyed over a 10-day experiment with variable wave conditions that included a 2-day storm with significant wave heights of up to 2.8 m. The beach exhibited two pronounced bar-trough systems located between the mean sea level and low neap tide level. Waves showed a cross-shore depth modulation, attaining maximum heights at high tide. The mean current was characterised dominantly by strong tide-induced longshore flows significantly reinforced by wind forcing during the storm, and by weaker, dominantly offshore, wave-induced flows. Vertical tidal water-level variations (tidal excursion rates) showed a bimodal distribution with a peak towards the mid-tide position and low rates near low and high water. The two bar-trough systems in the mid-tide zone remained stable in position during the experiment but showed significant local change. The absence of bar migration in spite of the relatively energetic context of this beach reflects high macro-scale bar morphological lag due to a combination of the large vertical tidal excursion rates in the mid-tide zone, the cross-shore wave structure, and the pronounced dual bar-trough system. The profile exhibited a highly variable pattern of local morphological change that showed poor correlation with wave energy levels and tidal excursion rates. Profile change reflected marked local morphodynamic feedback effects due mainly to breaks in slope associated with the bar-trough topography and with trough activity. Change was as important during low wave-energy conditions as during the storm. Strong flows in the entrenched troughs hindered cross-shore bar mobility while inducing longshore migration of medium-sized bedforms that contributed in generating short-term profile change. The large size and location of the two pronounced bars in the mid-tide zone of the beach are tentatively attributed respectively to the relatively high wave-energy levels affecting Merlimont beach, and to the cross-shore increase in wave height hinged on tidal modulation of water depths. These two large quasi-permanent bars probably originated as essentially breakpoint bars and are different from a small bar formed by swash and surf processes in the course of the experiment at the mean high water neap tide level, which is characterised by a certain degree of tidal stationarity and larger high-tide waves.     

Short‐term intertidal bar mobility on a ridge‐and‐runnel beach,Merlimont, northern France

Digital elevation models and topographic pro?les of a beach with intertidal bar and trough (ridge‐and‐runnel) morphology in Merlimont, northern France, were analysed in order to assess patterns of cross‐shore and longshore intertidal bar mobility. The beach exhibited a pronounced dual bar–trough system that showed cross‐shore stationarity. The bars and troughs were, however, characterized by signi?cant longshore advection of sand under the in?uence of suspension by waves and transport by strong tide‐ and wind‐driven longshore currents. Pro?le changes were due in part to the longshore migration of medium‐sized bedforms. The potential for cross‐shore bar migration appears to be mitigated by the large size of the two bars relative to incident wave energy, which is modulated by high vertical tidal excursion rates on this beach due to the large tidal range (mean spring tidal range = 8·3 m). Cross‐shore bar migration is also probably hindered by the well‐entrenched troughs which are maintained by channelled high‐energy intertidal ?ows generated by swash bores and by tidal discharge and drainage. The longshore migration of intertidal bars affecting Merlimont beach is embedded in a regional coastal sand transport pathway involving tidal and wind‐forced northward residual ?ows affecting the rectilinear northern French coast in the eastern English Channel. Copyright © 2004 John Wiley & Sons, Ltd.     

Bragg reflection of water waves by multiple floating horizontal flexible membranes with submerged rectangular bars on the seabed

Bragg reflection of water waves by multiple floating horizontal flexible membranes is investigated based on the linear wave theory and the assumption of small membrane response. Under the floating horizontal membranes, periodical submerged rectangular bars are arranged on the flat seabed. The total reflection and transmission coefficients are obtained by using the eigenfunction expansion method and the wide spacing approximation. The calculated coefficients are validated with the results available in the literature, which shows that the present method is applicable. The characteristics of Bragg reflection are systematically investigated by changing various parameters including the height of the rectangular bars, the number, the tension, the spacing, and the length of the flexible membranes. The results can help designing multiple floating horizontal flexible membranes as effective floating breakwaters by taking advantage of Bragg reflection.     

Sandy gravel accumulation in a fluvial environment

Particle size, pebble shape, pebble fabric, discharge and flow velocity data are used to introduce a model of sandy gravel formation in Welsh gravel-bed rivers. The development of contact-imbrication of the typically very bladed and very platy cobbles and larger pebbles subsequently acts to significantly affect the depositional modes and patterns of small pebbles and sand particles. An important distinction is drawn between sand deposition, which can occur at or below the bed surface, and pebble and cobble deposition, which is merely a surface phenomenon.     

渤海湾北部滨外沙坝演变的遥感分析

通过多时相航空遥感影像和MSS、TM、ETM卫星遥感影像的解译、对比,分析渤海湾北部滨外沙坝近50年来的演变过程。结果表明:在波浪、潮汐、潮流和河流等动力因素的作用下,滨外沙坝的动态变化较为明显,在整体西向漂移、向海侧边线蚀退的背景下,个体沙坝的变化表现为陆向蚀退、侵蚀消亡、西南向漂移与端点蚀退、西向漂移与端点延展和海向淤进与陆向蚀退交替等多种态势。     

超高强混凝土短柱抗震性能的试验研究

通过对12根剪跨比λ=2．0的超高强混凝土短柱在低周反复荷载下抗震性能的试验研究,分析了其破坏形态,并研究了轴压比和配箍率对试件滞回特性和抗震延性的影响,提出了满足一定延性要求（μ△≥3．0）超高强混凝土短柱的轴压比限值和箍筋加密区的最小配箍特征值的建议值。该值可为现行规范的修订提供参考。     

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Abstract

This study developed prestressed high-strength concrete (PHC) piles reinforced with high-strength materials (glass fiber-reinforced polymer (GFRP) bars) for flexural performance enhancement. Flexural strengths and behaviors of PHC piles reinforced with hybrid GFRP and steel bars were experimentally investigated, respectively. Large-scale specimens with total lengths of 12,000?mm and diameters of 600?mm were constructed and tested under bending, accompanied by evaluation of effects of non-prestressed reinforcement type and longitudinal reinforcement ratio. J-factors were calculated to evaluate deformability of all the specimens. PHC piles reinforced with GFRP bars were demonstrated to have much higher flexural capacity than those reinforced with steel bars. Moreover, strains at the midspans of cross sections of all the specimens basically conformed to the assumption of plane section. Failure of PHC piles reinforced with GFRP bars was attributable to gradual concrete crushing, while that of PHC piles reinforced with steel bars resulted from steel yielding. Results of this study were expected to provide theoretical basis for wide engineering applications of PHC piles reinforced with hybrid GFRP bars and steel bars in marine structures.