唐山震区深反射剖面分析

为了进一步研究唐山地区深部地壳构造与唐山大地震孕育及发生的关系,国家地震局地球物理研究所在石油部物探局的协助下,于1985年1月在唐山震区完成了64km长的深反射剖面野外观测,获得了高分辨率的整个地壳结构的详细资料。分析结果表明,唐山震区内深度500m以上的沉积层十分破碎;结晶基底为前震旦纪地层,埋深2-7km不等,覆盖地层倾斜,且断层发育,其中陡河断裂为正断层,延深至6-7km,推断该断层为1976年唐山发震的重要构造之一。测线上大约21km深处普遍存在一反射层;莫霍面深度在31-32km左右,与该地区折射剖面得到的结果相当一致。     

三维地震勘探数据处理的问题及其解决方法

三维地震勘探在十年内取得了显著的地质效果和经济效益。三维地震数据处理技术也得到了迅速的发展。但是,与二维相比,三维地震数据处理技术有许多不完善之处。本文对其中几个主要问题进行分析并提出解决方法。这些问题是三维叠加速度分析、三维静校正和叠前三维偏移等处理方法。     

沂沭断裂带断层泥中 K-Ar、FT 和 TL 体系年代学含义的初步研究

本文报道了利用K-Ar法、TL法和FT法,分别测定断层泥中1Md伊利石(<1μ粒级组份)、石英(2-10μ粒级组份)和磷灰石单矿物的年龄结果;给出了沂沭断裂带三次强烈活动的年龄区间及强度逐渐减弱的变化趋势。首先提出了利用这三种测年手段,测定断层泥中三种不同物质的年龄,进而研究断层活动(强度和时间)的新方法     

钇铝石榴石晶体高压相变研究

采用金刚石压砧高压设备,对立方结构掺钕钇铝榴石多晶进行高温高压相变研究。实验分同时加温加压、独立加压、独立加温三类。对压力温度作用后相变产物进行了 X 射线衍射研究,对相变前后样品的配位数、晶体结构、晶胞参数、体积、密度进行了对比。     

Downward migration of seismic activity prior to some great shallow earthquakes in Japanese subduction zones—a possible intermediateterm precursor

Before the 1944 Tonankai earthquake along the Nankai Trough, seismic activity increased in the shallow depths, and then the activity gradually migrated downwards. When it reached its limit (a depth of approximatelty 70 km), the main shock occurred. Several deep earthquakes, including one ofM5.3, occurred several months prior to the Tonankai earthquake. A similar downward migration pattern also can be recognized regarding the 1952 Tokachi-oki earthquake. In this case the deepest earthquakes reached about 400 km. This may be one of the intermediate-term precursory phenomena of great thrusttype earthquakes in subduction zones. Recent observations in the Tokai district along the Suruga Trough, where a large earthquake is expected to occur in the future, suggest a similar downward migration pattern in the land area.     

攀西古裂谷地区深部热流

在实测地表大地热流、岩石放射性元素含量以及生热率的基础上,作者计算了攀西古裂谷地区的深部热流值(q_r)及地壳上部放射性元素富集层厚度(D),即分别为38.4mw/m~2和15.7km。与世界上其它地区相比,本区具有较高的深部热流值和较大的D值。笔者进一步阐明,较大的D值是攀西古裂谷地区地壳分异程度差在地热上的反映,而较高的q_r值表明本区来自地壳深处上地幔的热量比较大,这与攀西古裂谷地区的整个地质发展历史相一致。     

广西弧形构造探讨

广西构造实为一弧形构造,它由四个并排的北东—北西向的轭状弧带所组成。每个弧带的前部,为坚硬的岩块所组成,所产生的断裂及岩浆活动对寻找与火成岩有关的矿产有一定意义。每个弧带的后部,产生盆地型沉积,有利于沉积矿产的形成。     

Attenuation of compressional waves in peridotite measured as a function of temperature at 200 MPa

A technique has been developed to determine attenuation in rocks at high temperature using a gas-media, high-pressure apparatus. A pulse transmission technique and a spectral ratio method are used to study compressional seismic properties of rocks. Seismic waves are transmitted to and from the sample through buffer rods of mullite. The effect of seismic wave reflections within the sample assembly are cancelled out by taking ratios of the spectra measured at different temperatures. In order to obtain good signal-to-noise ratio for resolving the attenuation at high pressure and temperature, special care is taken in the sample assembly and the ultrasonic coupling between the sample, buffer rods and transducers. A very tight connection of the sample-buffer rod-transducer is essential for obtaining high frequency signals (>300 kHz) at high temperature. A small mass is attached to each outside end of the transducer to drive low frequency signals (<250 kHz) into the sample. Before attenuation measurements, the sample and the buffer rods are tightly compacted in a platinum tube at high pressure and room temperature to ensure pressure seal of the sample assembly. The frequency range of measurement covers 50 to 450 kHz for the sample. Attenuation is very small in the buffer rod compared to the sample for the entire temperature range of the study. Because of the small attenuation, a wide frequency band of 50 kHz to 3.2 MHz can be covered for investigating the attenuation in the buffer rod. The technique has been used to measure attenuation at high confining pressure, and temperatures including sub- and hyper-solidus of upper mantle rocks. Therefore, effects of partial melting on attenuation can be studied.The method is applied to the attenuation measurement in a peridotite as a function of temperature to 1225°C at 200 MPa confining pressure. At high temperature, signal amplitude decays more rapidly at high frequency than at low frequency, from which attenuation (andQ) can be determined using a spectral ratio method. No frequency dependence ofQ is resolved for both the sample and the buffer rod over the entire temperature and frequency ranges of the measurement. The results show thatQ decreases rapidly with increasing temperature even in the temperature range below the solidus of peridotites. Such temperature sensitivity ofQ is probably more useful to probe thermal structure in the upper mantle than that of conductivity at temperatures below the solidus. The results in this study are compared with available seismic velocity, electrical conductivity and solidus data for peridotites, suggesting that there is no discontinuous change in both mechanical and electrical properties of peridotites at the solidus temperature. Even at hypersolidus temperatures, it appears that velocity drops and conductivity increases continuously (not abruptly) with increasing melt fraction. This implies that mechanical and electrical properties of the upper mantle will gradually change at the boundary where the geotherm crosses the solidus.     

当前高压变质作用研究中几个值得注意的动向

高压、超高压变质作用是地学研究的热点，它能很好地反映深部地质作用特征和恢复地质历史演化的过程。当前高压、超高压变质作用研究中有几个值得注意的动向：（１）高压变质作用中流体性状和物理化学特点的研究是解决高压变质作用成因的关键；（２）高压变质矿物流变学研究是揭示变质过程的有效途径；（３）超高压变质岩的发现是８０年代地学领域中的一场“革命”，其动力学模式为探讨大陆动力学开辟了新的思路。文中介绍了产生超高压变质的柯石英榴辉岩亚相组合的六种动力学模式。     

伸展盆地转换带分析──以松辽盆地北部为例

转换带可划分为５种类型：离散型转换带，汇聚型高凸起与低凸起转换，同向型高凸起与低凸起转换带。其中当伸展增加时，高凸起转换带可能发展为低凸起转换带。转换带的形成是由于变形地壳物质组成的不均一笥或区域张应力场的不均一性，而使伸展断层呈侧列或雁列式发生。松辽地发育种类型转换带，而以同向型高凸起低凸起转换带最为发育，推测高凸起转换带是盆岭式裂谷系的典型转换带。转换带是油气有利聚集区。