Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm

This paper presents a new contact calculating algorithm for contacts between two polyhedra with planar boundaries in the three-dimensional discontinuous deformation analysis (3-D DDA). In this algorithm, all six type contacts in 3-D (vertex-to-face, vertex-to-edge, vertex-to-vertex, face-to-face, edge-to-edge, and edge-to-face) are simply transformed into the form of point-to-face contacts. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. In this paper, formulations of normal contact, shear contact and frictional force submatrices based on the new method are derived and the algorithm has been programmed in VC⁺⁺. Examples are provided to demonstrate the new contact rule between two blocks.     

Comparative analyses of East Texas forest cover maps generated from Landsat and AVHRR data

Comparing satellite data derived map products are affected by differences in data characteristics, image acquisition dates, processing techniques, and classification schemes used for assigning pixels to a thematic class. By comparing two forest maps generated from Landsat Enhanced Thematic Mapper Plus (ETM+) and Advanced Very High Resolution Radiometer (AVHRR) images acquired on the same day, and processed using identical classification scheme and methods these differences were minimized. The ETM+ derived map had higher classification accuracy values and more precise area estimates than the AVHRR derived map. In the ETM+ derived map, 87 of the 599 verification data were misclassified, whereas in the AVHRR derived map, 155 of the 469 verification data were misclassified. Detailed error analyses by land cover class revealed that a land use based definition of forest accounted for 74% (64 out of 87) and 57% (89 out of 155) of the classification errors in ETM+ and AVHRR derived maps, respectively.     

松南海坨子—大布苏地区泉四段— 姚家组层序地层研究

根据工区内现有的钻井、测井和地震资料,应用以多级次基准面旋回为参照面的高分辨层序地层学理论与研究方法,对松辽盆地南部海坨子—大布苏地区的泉四段—姚家组地层进行了详细的层序地层研究,共识别出5个长期基准面旋回（相当于三级层序）,9个中期基准面旋回（相当于四级层序）,建立了研究区的层序划分方案,在连井剖面的层序地层对比基础上,建立了该区的地层格架,并对层序构成特征进行了分析,研究了储集层在层序格架内的分布规律,揭示出浊积砂体和三角洲前缘相的分流河道形成于基准面上升期,三角洲前缘相的河口坝、远砂坝和席状砂沉积形成于基准面下降期,指出浊积砂体和三角洲前缘相的远砂坝、席状砂沉积是研究区形成岩性油气藏的有利储集体。     

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.     

热带气旋对黄、渤海影响的统计特征分析

本文统计分析了1949—2000年共52年影响黄、渤海的热带气旋时空分布特点及ENS0、西太平洋副热带高压与影响黄、渤海的热带气旋关系。结果表明，西太平洋热带气放以四种主要路径影响黄、渤海，其影响时间、频数及强度均有不同。ENSO和西太平洋副热带高压的强度、位置将影响热带气旋对黄、渤海影响的路径和频数。     

石榴石橄榄岩的熔融实验及其地质意义

在20×10~9Pa和25×10~9Pa条件下,对石榴石橄榄岩进行的14次高温高压熔融实验研究表明,在1600℃时石榴石橄榄岩开始熔融(初熔),熔体中的SiO_2>70％,Na_2O+K_2O>8％,类似于A型花岗岩成分。本实验为地幔花岗岩的成因提供了证据。     

现代黄河三角洲土地利用变化分析

人类对海岸带的开发利用影响着海岸的变迁。土地利用和土地覆被变化可以说是自然与人文过程交叉最为密切的问题，是人地关系的具体体现。通过对黄河三角洲土地利用变化的研究，可了解人为因素对三角洲海岸带的开发利用状况及其对海岸侵蚀的影响。根据1987年和2001年两期卫星遥感图像和2001年野外调查数据，运用地理信息系统方法及数理统计方法，分析了现代黄河三角洲地区1987年至2001年土地利用／覆被的数量变化和空间变化特征；揭示了该地区各类土地利用数量变化的幅度、速度和土地利用空间变化的主要类型；阐明了该区各类土地利用变化的区域特点。该地区土地利用变化速度比整个环渤海地区速度快，草地、滩地和不明地类这3种类型大量减少，其他类型增多。从变化率来看，养殖区、库塘、油田用地增长最快。库塘、海滩养殖区等类型的增加，滨海草地的减少，使海岸侵蚀加剧。     

几丁糖酯原料药稳定性研究

该文建立高效凝胶渗透色谱法 (HPGPC) ,明胶比浊法 ,氧瓶燃烧法三种分析方法考察海洋硫酸多糖药物几丁糖酯的稳定性 ,采用这三种方法分别考察几丁糖酯原料药在高温、高湿、强光照射及加速条件下分子量及分布宽度、样品中硫酸根含量及样品含量的变化情况。结果表明 :三种方法均适用于几丁糖酯的稳定性考察 ,几丁糖酯在上述影响因素条件下稳定性良好     

北太平洋亚热带环流区表层水中226Ra和228Ra的分布与变化

对1999年9～10月采自北太平洋亚热带环流区的19份表层海水样品的Ra同位素分析表明。研究海域表层水中的^226Ra、^228Ra放射性比度分别介于0．67～0．92、0．08～0．30Bq／m^3之间，平均值分别为0．74、0．11Bq/m^3．^226Ra/^228Ra)A．R．活度比的变化范围为0．11～0．44，平均值为0．19．上述数值明显低于近岸海域水体的相应值，表现为典型的开阔大洋水的特征．从空间分布的特征看，研究海域Ra同位素含量与^226Ra/^228Ra)A.R.值均呈均匀分布态势．将本研究结果与历史数据进行对比后发现，本研究获得的^226Ra、^228Ra放射性比度比20世纪60～80年代得到的数据来得低，可能与水体层化作用加强导致的Ra补充量的减少以及生物生产力升高导致的Ra迁出量的增加有关．北太平洋亚热带环流区表层水中Ra同位素的时间变化与文献报道的该海域叶绿素a、硅酸盐、磷酸盐含量与初级生产力的历史变化趋势相吻合．     

高分辨率遥感技术在厦门海湾生态环境调查中的应用

对于局部区域研究，高分辨率卫星遥感及其影像的智能化处理技术是获取信息的新手段．本文以IKONOS遥感影像在厦门海湾的应用为例，探讨高分辨率遥感卫星影像应用于海湾生态环境调查与分析的应用技术．通过分析高分辨率影像地物特征，提出高分辨率遥感影像的重要处理技术：采用不同缩放尺度进行分类和利用空间特征及纹理结构进行专题信息提取。