浅析渭河断陷地下热水赋存的地质构造背景

渭河断陷赋存丰富的地下热水资源．本文叙述了该区地热分布特征,阐明了区内地质构造、深部地质条件对地下热水赋存和水温、水量变化的控制作用,兼论了西安城郊区及地热赋存的地质构造背景．对指导当前和今后这一地区地热资源的开发利用和管理工作有重要意义。     

Heat flow in the Basin and Range province and thermal effects of tectonic extension

In regions of tectonic extension, vertical convective transport of heat in the lithosphere is inevitable. The resulting departure of lithosphere temperature and thickness from conduction-model estimates depends upon the mechanical mode of extension and upon how rapidly extension is (and has been) taking place. Present knowledge of these processes is insufficient to provide adequate constraints on thermal models. The high and variable regional heat flow and the intense local heat discharge at volcanic centers in the Basin and Range province of the United States could be accounted for by regional and local variations in extensional strain rate without invoking anomalous conductive heat flow from the asthenosphere. Anomalous surface heat flow typical of the province could be generated by distributed extension at average rates of about 1/2 to 1%/m.y., similar to rates estimated from structural evidence. To account for higher heat flow in subregions like the Battle mountain High, these rates would be increased by a factor of about 3, and locally at active bimodal volcanic centers, by an order of magnitude more.     

Estimation of Sensible Heat Flux from Surface Temperature Wave and One-Time-of-Day Air Temperature Observation

By means of the algorithm presented here, the temporal course H(t) and the daily mean H¯ of the sensible heat flux H can be estimated from measurements of the thermodynamic surface temperature (as a function of time) and from a one-time-of-day air temperature observation. In addition to these temperatures, one needs estimates for daily mean wind speed, for the roughness lengths of momentum and heat transfer, and for the displacement height. First, a quite general solution of the equation for heat conductance (equation for the vertical profile of potential temperature (z,t)) in the dynamic sublayer will be presented. The undetermined parameters in this solution will be defined with the aid of the above mentioned measurements. The influence of horizontal advection will be taken into account. After that, the sensible heat flux can be evaluated from the temperature difference between surface and air with the well known resistance formulae. In this paper the algorithm is derived for areas with homogeneous surfaces, i.e., with uniform surface temperatures. Finally, the method will be verified by measurements taken during the field campaigns HIBE 89 (Hildesheimer Börde in Germany) and EFEDA 91 (Spain). The root mean square errors (RMSE) for the comparison between measurement and model with regard to the temperature difference of surface and air amount to one or two degrees Kelvin, and the error of H¯ reaches 10 to 25 per cent. The method can be used to determine the sensible heat flux from measurements of surface temperatures by satellites (e.g., METEOSAT), but can also be applied to ground based measurements. For instance, horizontal temperature advection can be estimated from measurements at a single location, especially if more than one near-surface air temperature is available. The procedure can be generalized for larger areas, which consist of various surface types with different surface temperatures. This generalization of the algorithm is in progress and will be addressed in a subsequent paper. It will allow us to improve the estimates for H(t) by means of temperature measurements from, e.g., NOAA/AVHRR or LANDSAT/TM, taking into account the heterogeneity of the area that is contained in one METEOSAT pixel.     

CONCENTRATION AND FLUX OF CO_2, TURBULENCE FLUXES AND RADIATION BALANCE IN THE NEAR SURFACE LAYER OVER WHEAT FIELD

The gradient of CO_2 concentration, photosynthetically active radiation (PAR). net radiation.soil heat flux, profiles of wind speed, and air temperature and humidity were measured above awheat field during May and June 1985 at Beijing Agro-Ecosystems Experimental Station. Beijing,China. Fluxes of carbon dioxide, sensible heat, latent heat and momentum were calculated byusing the aerodynamic method. The observation site. equipment, calibration techniques, theerrors associated with the measurement, and the computational procedures are described. Theresults show that the diurnal variations of amplitude of CO_2 concentrations were 103.8 to 27. 0. 86.3 to 22.8 and 69.8 to 11.6 ppm: the average CO_2 concentrations were 331.5. 339.9 and 364.6 ppmfor the photosynthesis type, and 369.6. 364.0 and 375.2 ppm for the respiration type at 1. 2 and10 m above surface, respectively, from May 14 to June 15. In the daytime, transfer direction ofthe CO_2 fluxes and gradients is from air to crop canopy, and at noon (1100 to 1300 BT (BeijingTime)) the transfer rate reaches negative maximum value. At night, transfer of CO_2 fluxes andgradients is in the reversed direction and reaches positive maximum in the early morning (0400 to0600 BT). There are strong negative correlations between CO_2 flux and the net radiation (Rn),available energy (H LE). photosynthetically active radiation (PAR) and momentum flux (τ).     

西太平洋副热带高压中期变化的数值试验 Ⅱ.热带西太平洋热源的作用

用一个全球谱模式作数值试验,研究了１９７９年６月中旬一次西太平洋副热带高压西伸北进的中期天气过程中热带西太平洋地区理想热源的作用。结果表明：理想热源的作用大约在４天以后可以影响我国东部的副热带高压和中高纬度的环流;理想热源在热带洋面上产生的扰动首先沿副高南边的东风气流向西北方向传播,到中纬西风带后分为两支,一支继续向西北方向传播,另一支转向东北偏东方向传播,两支扰动的共同作用,导致了副热带高压和西风带环流的变化。     

城内外屋顶面附近风.温特征的初步分析

本文以低纬高原城市昆明城区为研究对象,利用城内外屋顶面附近的风·温实测资料,分析了研究较少的,做为城市第二热力面的城市内外屋顶附近的风·温特征、变化规律及其差异,得到了一些有益的结果,可为探讨城市区域内屋顶面对城市气候形成的作用和机制、城市气候的深入研究,以及城市建筑的规划、设计提供依据。     

Experimental study and constitutive modelling of elasto‐plastic damage in heat‐treated mortar

This study investigates the effect of a heat‐treatment upon the thermo‐mechanical behaviour of a model cement‐based material, i.e. a normalized mortar, with a (w/c) ratio of 0.5. First, a whole set of varied experimental results is provided, in order to either identify or validate a thermo‐mechanical constitutive model, presented in the second paper part. Experimental responses of both hydraulic and mechanical behaviour are given after different heating/cooling cycling levels (105, 200, 300, 400^°C). The reference state, used for comparison purposes, is taken after mass stabilization at 60^°C. Typical uniaxial compression tests are provided, and original triaxial deviatoric compressive test responses are also given. Hydraulic behaviour is identified simultaneously to triaxial deviatoric compressive loading through gas permeability K_gas assessment. K_gas is well correlated with volumetric strain evolution: gas permeability increases hugely when ε_v testifies of a dilatant material behaviour, instead of contractile from the test start. Finally, the thermo‐mechanical model, based on a thermodynamics approach, is identified using the experimental results on uniaxial and triaxial deviatoric compression. It is also positively validated at residual state for triaxial deviatoric compression, but also by using a different stress path in lateral extension, which is at the origin of noticeable plasticity. Copyright © 2009 John Wiley & Sons, Ltd.     

Estimation of seasonal crop water consumption in a vineyard using Bowen ratio‐energy balance method

Information about seasonal crop water consumption is useful to develop the appropriate irrigation scheme. Measurements of energy balance components using the Bowen ratio method were made for a complete growing season at a vineyard in the arid region of northwest China. Vine in the experiment was furrow‐irrigated using a trellis system. The measured evapotranspiration was compared with estimates using the soil water balance method. It is shown that the Bowen ratio method provided accurate estimates of evapotranspiration from the vineyard and this requires that the Bowen ratio system is appropriately installed. The energy balance components showed typical diurnal pattern with peaks that occurred around the midday, except for the ground heat flux which delayed its peak by 2–3 h. The sensible heat flux was greater than the latent heat flux and followed the net radiation closely. The ratio of the latent heat flux to net radiation was low in the early growing season and increased over time. Under the limited irrigation experienced in the vineyard, the latent heat flux was controlled by available soil moisture and the total evapotranspiration in the growing season was 253 mm. The seasonal progression of the crop coefficient is similar to that reported in the literature, with the maximum occurring during the month of September. The crop coefficient can be estimated as a non‐linear function of day of year (DOY) and used to estimate evapotranspiration from vineyards in the region. Copyright © 2007 John Wiley & Sons, Ltd.     

Data collection methodology for dynamic temperature model testing and corroboration

This article describes a data collection approach for determining the significance of individual heat fluxes within streams with an emphasis on testing (i.e. identification of possible missing heat fluxes), development, calibration and corroboration of a dynamic temperature model. The basis for developing this approach was a preliminary temperature modelling effort on the Virgin River in southwestern Utah during a low‐flow period that suggested important components of the energy balance might be missing in the original standard surface‐flux temperature model. Possible missing heat fluxes were identified as bed conduction, hyporheic exchange, dead zone warming and exchange and poor representation of the amount of solar radiation entering the water column. To identify and estimate the relative importance of the missing components, a comprehensive data collection effort was developed and implemented. In particular, a method for measuring shortwave radiation behaviour in the water column and an in situ method for separating out bed conduction and hyporheic influences were established. The resulting data and subsequent modelling effort indicate that hyporheic and dead zone heat fluxes are important, whereas solar radiation reflection at the water surface was found to be insignificant. Although bed conduction can be significant in certain rivers, it was found to have little effect on the overall heat budget for this section of the Virgin River. Copyright © 2009 John Wiley & Sons, Ltd.     

成都市城市热岛效应分析

城市热岛效应是城市气候最显著的特征之一。基于地理信息系统和不同时次的遥感影像,探讨成都市地表温度、热岛强度、热岛等级的分布特征及其演变。结果表明:成都市热岛效应明显且夜间夏强冬弱,地表温度呈条状分布;日间城市多数区域属于弱热岛以上等级,中心城区偏向强热岛和极强热岛,夜间强热岛面积扩张,冬季热岛等级增加明显;2002~2012年,城市热岛等级增加,强热岛面积扩张,但存在昼夜和季节性差异。