分形在地貌学中应用的几个问题的分析

就实际地貌分形研究工作中经常遇到的截面约定、自仿射分形局域维与渡越长度、分维的比较以及过渡分形等几个问题进行了分析和探讨，并提出了在应用过程中的注意事项和解决方案。     

Horizontal and vertical components of earthquake ground motions at liquefiable sites

Field observations on ground motions from recent earthquakes imply that current knowledge is limited with regard to relating vertical and horizontal motions at liquefiable sites. This paper describes a study with the purpose of clarifying this emerging issue to some extent. A series of numerical analyses is carried out on a liquefiable soil deposit with a verified, fully coupled, nonlinear procedure. It is shown that the transformation of vertical motions in the deposit differs considerably from the transformation of horizontal motions. Both the amplitude and frequency content of the horizontal motions are strongly dependent on the shaking level or the associated nonlinear soil behavior. The transfer function for vertical motions is however likely to be independent of the intensity of input motions; no reduction in the amplitude occurs even in the case of strong shaking. The results are shown to be in consistence with the laboratory observations on shaking table tests and recent field observations that less nonlinearity exists for vertical motions. It is also shown that the possibility exists for using information on spectral ratios between the horizontal and vertical surface motions to quickly identify in situ soil behavior and liquefaction that are not readily covered by conventional field or laboratory experimentation procedures.     

皮肤图像分析系统对祛斑类化妆品功效评价的研究

目的是探索如何获得不同色素性皮肤病的清晰图像，研制出操作简单、自动化与精度高的皮肤图像分析系统。方法：应用多光谱皮肤显微偏振光与数字图像处理技术，测量目标皮损形状、面积、灰度、积分光密度及色素颜色参数的变化等。结果：用祛斑类化妆品和药物治疗136例黄褐斑、经该系统测量分析后各治疗组相关参数随时间的推移呈下降趋势，而药物组与对照组相比各参数值明显下降、与各组相比均有显著差异（P＜0．05），并提出客观的疗效评定单位“ID”值。结论：该系统是一种潜力较大的皮肤表面色素定量工具，客观性和重复性好，灵敏度高，不对观察对象造成损伤，在临床获得满意效果。     

Evaluating Earthquake-Triggered Landslide Hazard at the Basin Scale Through Gis in the Upper Sele River Valley

To evaluate techniques for assessing earthquake-triggeredlandslide hazard in the Southern Apennines (Italy), a GIS-based analysis was used to modelseismically induced slope deformations. Geological, geotechnical, geomorphological and seismologicaldata were integrated into a standard earthquake slope stability model. The model assessed thelandslide potential that existed during the 1980 Irpinian earthquake in the Upper Sele river Valley.The standard Newmark displacement analysis, widely used for predicting the location of shallowunstable slopes, does not take into account errors and/or uncertainties in the input parameters.Therefore, a probabilistic Newmark displacement analysis technique has been used. Probabilistictechniques allow, e.g., an estimation of the probability that a slope will exceed a certain criticalvalue of Newmark displacement. In our probabilistic method, a Monte-Carlo based simulation modelis used in conjunction with a GIS. The random variability of geotechnical data is modelled by probabilitydensity functions (pdfs), while for the seismic input three different regression laws wereconsidered. Input probability distributions are sampled and the resulting values input into empiricalrelations for estimating Newmark displacement. The outcome is a map in which to each siteis related a spatial probability distribution for the expected displacement in response to seismic loading.Results of the experiments show a high grade of uncertainty in the application of the Newmarkanalysis both for the deterministic and probabilistic approach in a complex geological setting suchas the high Sele valley, quite common in the Southern Apennines. They show a strong dependence onthe reliability of the spatial data used in input, so that, when the model is used at basin scale,results are strongly influenced by local environmental condition (e.g., topography, lithology, groundwatercondition) and decrease the model performance.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

疏勒河流域昌马灌区泉水量预测分析

疏勒河流域农业灌溉主要采用地表水灌溉 ,泉水为该区农业灌溉的主要水源之一 ,该文利用 2 0世纪 90年代的测流资料 ,采用有限差分方法对疏勒河中游泉水量的变化趋势进行预测分析 ,结果显示 ,随着时间的延长 ,泉流量呈逐渐减小的趋势 ,但下降梯度逐渐变小 ,最终趋于稳定     

大连市城市内部居住环境评价的空间结构——基于面源模型的分析

以大连市为例 ,首先利用ARC/INFO软件将研究地区划分成 162个元胞作为评价的基本空间单元 ,建立了居住环境评价的面源模型。其次利用MDS方法确定了评价因子、列联表法验证了居民属性与居住环境评价之间的相互独立程度、因子分析方法探讨了居住环境评价结构的平行性。最后应用GIS对居住环境评价空间分异现象进行了分析。     

Upper Oligocene-Lower Miocene shallowing-upwardlacustrine sequences controlled by periodic and non-periodic processes(Ebro Basin, northeastern Spain)

The lacustrine facies from two sections (Candasnos and Fraga) ofthe Oligocene-Miocene Torrente de Cinca lithostratigraphic Unit in thecentral part of the Ebro Basin (Spain) have been analysed to determine theinfluence of orbital parameters in lacustrine sedimentation. The unit ispredominantly composed of limestones and marls, and represents a shallowlacustrine freshwater system. The sedimentological features of the faciesstudied demonstrate that the lower part of the Candasnos section representsoffshore lacustrine subenvironments whereas the upper part, and the whole ofthe Fraga section, characterise marginal lacustrine areas. Series of stratalthickness variations of limestone, marl, and limestone/marl couplets fromboth sections have been analysed using spectral analysis. This shows thatinformation corresponding to periodic cycles only appears in the offshorefacies, that is to say, in the lower part of Candasnos section, and disappearsin the marginal facies where non-periodic cycles exist. Furthermore, thespectral analysis of the offshore facies highlights the existence of a peak inthe power spectrum with a period of around 7 (6.8 to 7.8) that can berecognised in the field as shallowing-upward lacustrine sequences.Magnetostratigraphic data from the Candasnos section allow us to establish atime span of 2,808 years for the limestone/marl couplet from the lower partof this section, and between 19,000 and 22,000 years for the periodic cycleidentified, thus representing the climatic precession cycle. Shallowingsequences from marginal areas do not correspond with any periodiccycle.