南华砷铊矿床雄黄标型特征

雄黄是云南省南华砷铊矿床中最主要工业矿物。它不仅与铊矿物共生，而且本身含有较高的铊，可高达（n×10～n×100）×10-6。砷铊矿床雄黄与砷矿床雄黄相比较在产出条件，微量元素、硫同位素和晶面间距等方面均有不同程度差别。前者富铊，低氯、高氟和硼，富轻硫同位素，相对贫稀土元素；后春富氯，低铊，高碘，富重硫同位素，相对贫碱土族元素。这些标型特征不仅有助于南华砷铊矿床进一步开发，而且有助于含雄黄的热液矿床，特别是As、Hg、Tl、Sb、Au等矿床的找矿勘探。     

中国煤中的氟

氟是煤中所含微量元素中丰度较高的少数几种元素之一。对我国581个煤样分析数据的统计表明,多数样品氟含量处于20～300mg/kg,平均40mg/kg,个别超过1000mg/kg。氟在煤中赋存状态有:①独立的氟矿物;②以类质同象存在于矿物晶格内;③被矿物吸附;④以F-离子形式溶于水中。在煤中所含微量元素中,氟是对植物、动物和人体健康的影响面最大的元素。     

Magmatic evolution of Li–F, rare-metal granites: a case study of melt inclusions in the Khangilay complex, Eastern Transbaikalia (Russia)

We report compositions of homogenized quartz-hosted melt inclusions from a layered sequence of Li-, F-rich granites in the Khangilay complex that document the range of melt evolution from barren biotite granites to Ta-rich, lepidolite–amazonite–albite granites. The melt inclusions are crystalline at room temperature and were homogenized in a rapid-quench hydrothermal apparatus at 200 MPa before analysis. Homogenization runs determined solidus temperatures near 550 °C and full homogenization between 650 and 750 °C. The compositions of inclusions, determined by electron microprobe and Raman spectroscopy (for H₂O), show regular overall trends of increasing differentiation from the least-evolved Khangilay units to apical units in the Orlovka intrusion. Total volatile contents in the most-evolved melts reach over 11 wt.% (H₂O: 8.6 wt.%, F: 1.6 wt.%, B₂O₃: 1.5 wt.%). Concentrations of Rb range from about 1000 to 3600 ppm but other trace elements could not be measured reliably by electron microprobe. The resulting trends of melt evolution are similar to those described by the whole-rock samples, despite petrographic evidence for albite- and mica-rich segregations previously taken as evidence for post-magmatic metasomatism.

Melt variation trends in most samples are consistent with fractional crystallization as the main process of magma evolution and residual melt compositions plot at the granite minimum in the normative Qz–Ab–Or system. However, melts trapped in the highly evolved pegmatitic samples from Orlovka deviate from the minimum melt composition and show compositional variations in Al, Na and K that requires a different explanation. We suggest that unmixing of the late-stage residual melt into an aluminosilicate melt and a salt-rich dense aqueous fluid (hydrosaline melt) occurred. Experimental data show the effectiveness of this process to separate K (aluminosilicate melt) from Na (hydrosaline melt) and high mobility of the latter due to its low viscosity and relatively low density may explain local zones of albitization in the upper parts of the granite.     

The magmatic–hydrothermal transition—evidence from quartz phenocryst textures and endoskarn abundance in Cu–Zn skarns at the Empire Mine, Idaho, USA

Information about the magmatic to hydrothermal transition is preserved in late-stage features of quartz phenocrysts and endoskarn alteration in some Cu–Zn skarn deposits such as the Empire Mine in Idaho. Important features include: (1) quartz phenocrysts with strong resorption textures such as vermicular zones of igneous groundmass cutting primary quartz cathodoluminescence banding, (2) anomalous amounts of endoskarn (more than 50% of mineralized rock), (3) high F activities as evidenced by fluorite as an accessory mineral in igneous rocks, in alteration assemblages, and in fluid inclusions and by high F in hydroxyl sites in igneous biotite and amphibole, and (4) direct association of Zn, which normally is deposited distally at low temperature, with Cu in proximal locations and in endoskarn. These features are explained by the following model: (1) F lowers the solidus temperature of the magma, thus changing the timing, temperature, and duration of hydrothermal fluid exsolution. (2) Upon magmatic vapor saturation the F-rich hydrothermal fluids form bubbles that adhere to quartz phenocrysts and chemically corrode/tunnel into the quartz forming vermicular resorption textures. (3) F-rich hydrothermal fluids also promote the formation of endoskarn; silicic rocks are attacked by F-rich fluids in the same sense that carbonate wall rocks are dissolved by weakly to moderately acidic hydrothermal fluids. (4) Low fluid exsolution temperature facilitated by high F activity promotes high Zn/Cu ratios in proximal locations due to the solubility of Zn relative to Cu at lower temperatures. This model may be applicable at other localities such as the world-class Cu–Zn skarn Antamina mine, as well as some tin and rapakivi granites.     

富氟花岗岩中萤石岩浆成因的新证据

通过富氟花岗岩-HF-H2O体系的熔化-结晶实验,在620～700℃、1×108Pa条件下获得了石英+碱性长石+黄玉+云母+萤石的矿物组合.在该实验体系中首次发现了八面体萤石.实验结果表明,在岩浆条件下可以形成萤石,从而为富氟花岗岩中萤石的岩浆成因提供了新证据.     

合成磷灰石的去氟机理研究

用固相反应法和sol-gel法合成了不同类型的磷灰石（AP），并采用TEM、XRD、IR、BET比表面积法及静、动态吸附等方法研究了不同AP的比表面积、结晶度、晶胞参数、结晶尺寸、晶格缺陷度、Ca/P摩尔比和煅烧温度等与吸氟能力的关系，结果表明：结晶度高、晶粒大的AP有较小的吸氟量，属表面单分子层化学络合吸附机理；酸活化的AP有较大的吸氟量，属溶解-沉淀与沉淀物表面纳米尺寸效应吸附的复合去氟机理；具纳米尺寸的HAP在常温、常压、无二次污染、小于11mg/L的低含氟浓度废水中且不酸化情况下有较大吸氟量，属纳米尺寸效应吸附机理。     

Record Arctic Ozone Loss in Spring 2020 is Likely Caused by North Pacific Warm Sea Surface Temperature Anomalies

Record ozone loss was observed in the Arctic stratosphere in spring 2020. This study aims to determine what caused the extreme Arctic ozone loss. Observations and simulation results are examined in order to show that the extreme Arctic ozone loss was likely caused by record-high sea surface temperatures(SSTs) in the North Pacific. It is found that the record Arctic ozone loss was associated with the extremely cold and persistent stratospheric polar vortex over February–April, and the extremely cold vortex was a result of anomalously weak planetary wave activity. Further analysis reveals that the weak wave activity can be traced to anomalously warm SSTs in the North Pacific. Both observations and simulations show that warm SST anomalies in the North Pacific could have caused the weakening of wavenumber-1 wave activity, colder Arctic vortex, and lower Arctic ozone. These results suggest that for the present-day level of ozone-depleting substances, severe Arctic ozone loss could form again, as long as certain dynamic conditions are satisfied.     

高精度温度采集系统设计

针对高精度温度采集的需求,设计了一个以低功耗单片机MSP430F149作为核心处理器,以PT100铂电阻为传感器的温度采集系统。为了提高系统的复用性,采用精密电阻法,从硬件设计上消除了恒流源电流漂移以及A/D转换电路参考电压精度对温度测量数据的影响。重点描述了系统设计方案,详细说明了恒流源选择的原则、电流偏差的消除以及AD7792转换器的操作步骤。实验结果表明,温度测量精度优于0.1 ℃。对比试验表明,系统稳定性良好,已应用于业务产品中。     

川滇地区电离层多参量异常监测系统的设计与实现

介绍了川滇地区电离层多参量异常监测系统的设计思路与功能实现,并将该系统应用于2019年6月17日四川长宁MS6.0地震的监测试验.结果表明:该系统实现了全球和中国区域垂直总电子含量VTEC、站点VTEC和F2层临界频率foF2异常变化的实时监测,有助于开展示范性地震电离层异常监测工作,其图形及数据结果可为地震-电离层异...     

三肇凹陷青山口组源岩生成油向下“倒灌”运移层位及其研究意义

为了研究三肇凹陷青山口组源岩生成的油向下“倒灌”运移层位,对油向下“倒灌”运移机制及条件进行了研究,得到三肇凹陷扶杨油层同时具备①青山口组源岩目前应具有足够大的超压;②存在连通青山口组源岩和扶杨油层的T2断裂2个条件,青山口组源岩生成的油能够在超压的作用下在嫩江组沉积末期、明水组沉积末期和古近系沉积末期通过T2断裂向下伏扶杨油层中“倒灌”运移。利用压力封闭原理,对三肇凹陷青山口组源岩生成的油向下“倒灌”运移距离进行了研究,得到三肇凹陷青山口组源岩生成的油向下“倒灌”运移距离一般大于500 m,而三肇凹陷扶杨油层地层厚度最大只有500 m,表明三肇凹陷青山口组源岩生成的油可以向下“倒灌”运移至整个扶杨油层的任何部位。目前三肇凹陷扶杨油层从上至下均含油,且已找到的油藏均分布于青山口组源岩生成的油能够向下“倒灌”运移分布范围内或附近,这表明青山口组源岩生成的油向下“倒灌”运移层位控制着油气富集层位,青山口组源岩生成的油向下“倒灌”运移分布范围控制着三肇凹陷扶杨油层油藏形成与分布范围。青山口组源岩生成的油向下“倒灌”运移分布范围及其附近应是三肇凹陷扶杨油层油下一步勘探的有利地区。