The topography of Iapetus' leading side

We have used Cassini stereo images to study the topography of Iapetus' leading side. A terrain model derived at resolutions of 4-8 km reveals that Iapetus has substantial topography with heights in the range of −10 km to +13 km, much more than observed on the other middle-sized satellites of Saturn so far. Most of the topography is older than 4 Ga [Neukum, G., Wagner, R., Denk, T., Porco, C.C., 2005. Lunar Planet. Sci. XXXVI. Abstract 2034] which implies that Iapetus must have had a thick lithosphere early in its history to support this topography. Models of lithospheric deflection by topographic loads provide an estimate of the required elastic thickness in the range of 50-100 km. Iapetus' prominent equatorial ridge [Porco, C.C., and 34 colleagues, 2005. Science 307, 1237-1242] reaches widths of 70 km and heights of up to 13 km from their base within the modeled area. The morphology of the ridge suggests an endogenous origin rather than a formation by collisional accretion of a ring remnant [Ip, W.-H., 2006. Geophys. Res. Lett. 33, doi:10.1029/2005GL025386. L16203]. The transition from simple to complex central peak craters on Iapetus occurs at diameters of 11±3 km. The central peaks have pronounced conical shapes with flanking slopes of typically 11° and heights that can rise above the surrounding plains. Crater depths seem to be systematically lower on Iapetus than on similarly sized Rhea, which if true, may be related to more pronounced crater-wall slumping (which widens the craters) on Iapetus than on Rhea. There are seven large impact basins with complex morphologies including central peak massifs and terraced walls, the largest one reaches 800 km in diameter and has rim topography of up to 10 km. Generally, no rings are observed with the basins consistent with a thick lithosphere but still thin enough to allow for viscous relaxation of the basin floors, which is inferred from crater depth-to-diameter measurements. In particular, a 400-km basin shows up-domed floor topography which is suggestive of viscous relaxation. A model of complex crater formation with a viscoplastic (Bingham) rheology [Melosh, H.J., 1989. Impact Cratering. Oxford Univ. Press, New York] of the impact-shocked icy material provides an estimate of the effective cohesion/viscosity at . The local distribution of bright and dark material on the surface of Iapetus is largely controlled by topography and consistent with the dark material being a sublimation lag deposit originating from a bright icy substrate mixed with the dark components, but frost deposits are possible as well.     

Multi-wavelength observations of Asteroid 2100 Ra-Shalom

We observed near-Earth asteroid (NEA) 2100 Ra-Shalom over a six-year period, obtaining rotationally resolved spectra in the visible, near-infrared, thermal-infrared, and radar wavelengths. We find that Ra-Shalom has an effective diameter of Deff=2.3±0.2 km, rotation period P=19.793±0.001 h, visual albedo pv=0.13±0.03, radar albedo , and polarization ratio μc=0.25±0.04. We used our radar observations to generate a three-dimensional shape model which shows several structural features of interest. Based on our thermal observations, Ra-Shalom has a high thermal inertia of ∼10³ J m⁻² s^−0.5 K⁻¹, consistent with a coarse or rocky surface and the inferences of others [Harris, A.W., Davies, J.K., Green, S.F., 1998. Icarus 135, 441-450; Delbo, M., Harris, A.W., Binzel, R.P., Pravec, P., Davies, J.K., 2003. Icarus 166, 116-130]. Our spectral data indicate that Ra-Shalom is a K-class asteroid and we find excellent agreement between our spectra and laboratory spectra of the CV3 meteorite Grosnaja. Our spectra show rotation-dependent variations consistent with global variations in grain size. Our radar observations show rotation-dependent variations in radar albedo consistent with global variations in the thickness of a relatively thin regolith.     

Dunes on Titan observed by Cassini Radar

Thousands of longitudinal dunes have recently been discovered by the Titan Radar Mapper on the surface of Titan. These are found mainly within ±30° of the equator in optically-, near-infrared-, and radar-dark regions, indicating a strong proportion of organics, and cover well over 5% of Titan's surface. Their longitudinal duneform, interactions with topography, and correlation with other aeolian forms indicate a single, dominant wind direction aligned with the dune axis plus lesser, off-axis or seasonally alternating winds. Global compilations of dune orientations reveal the mean wind direction is dominantly eastwards, with regional and local variations where winds are diverted around topographically high features, such as mountain blocks or broad landforms. Global winds may carry sediments from high latitude regions to equatorial regions, where relatively drier conditions prevail, and the particles are reworked into dunes, perhaps on timescales of thousands to tens of thousands of years. On Titan, adequate sediment supply, sufficient wind, and the absence of sediment carriage and trapping by fluids are the dominant factors in the presence of dunes.     

Carbon dioxide segregation in 1:4 and 1:9 CO2:H2O ices

The mid-infrared spectra of mixed vapor deposited ices of CO₂ and H₂O were studied as a function of both deposition temperature and warming from 15 to 100 K. The spectra of ices deposited at 15 K show marked changes on warming beginning at 60 K. These changes are consistent with CO₂ segregating within the ice matrix into pure CO₂ domains. Ices deposited at 60 and 70 K show a greater degree of segregation, as high as 90% for 1:4 CO₂:H₂O ice mixtures deposited at 70 K. As the ice is warmed above 80 K, preferential sublimation of the segregated CO₂ is observed. The kinetics of the segregation process is also examined. The segregation of the CO₂ as the ice is warmed corresponds to temperatures at which the structure of the water ice matrix changes from the high density amorphous phase to the low density amorphous phase. We show how these microstructural changes in the ice have a profound effect on the photochemistry induced by ultraviolet irradiation. These experimental results provide a framework in which observations of CO₂ on the icy bodies of the outer Solar System can be considered.     

Dune-forming winds on Titan and the influence of topography

Numerous extended dunes on Saturn's moon Titan detected by the Cassini RADAR constrain the long-term pattern of surface winds. We analyse the statistics of surface wind speed and direction and their spatial and temporal variability predicted by a general circulation model (GCM) in order to constrain surface wind predictions of this GCM by dune observations. The model shows that modern winds are sufficient for saltation and dune formation at low latitudes, in agreement with the presence of dunes there. The best condition for the dune-forming wind occurs with a threshold friction speed of 0.02 m s⁻¹ or slightly less. The equatorial region is conducive to longitudinal dunes because of a combined effect of a high sand drift potential and obtuse bimodal wind pattern oblique to the equator caused by the seasonal reversal of the Hadley circulation. The cross-equatorial wind is steady, and is characterised by a high Weibull shape parameter (k∼4). The wind pattern at higher latitudes is more complex and gusty, and neither longitudinal nor transversal dunes would be able to form. Putative large-scale topography is found to have a profound influence on the near-surface wind pattern. Generally mountains cause a convergence and speeding up on the flank, while basins weaken the wind and cause a divergent flow. Longitudinal dunes can be deflected on the foot of mountains by up to 90°. If Xanadu is a hypothetical large mountain, a wind pattern converging in Xanadu that entirely disagrees with the dune observations is predicted. If instead Xanadu is a large basin, the wind arcs clockwise north of Xanadu and anti-clockwise west and southwest of Xanadu, in agreement with the dune orientations in the vicinity of Xanadu. The albedo pattern has comparatively little influence on the wind field. Isolated mountain chains cause only local-scale change in the wind pattern. However, the persistent surface easterlies in Belet, which are in conflict with the dune orientations, do not disappear by any combination of large-scale topography.     

Global survey of color variations on 433 Eros: Implications for regolith processes and asteroid environments

High-resolution imaging acquired with the Near Earth Asteroid Rendezvous Shoemaker (NEAR Shoemaker) spacecraft is used to elucidate the spectral properties and spatial distribution of color units on Asteroid 433 Eros. Previous workers mapped four distinct types of color units on the surface (bright streaks, dark soils, ponded materials, average regolith). These units exhibit albedo and color boundaries but there is no evidence to indicate they represent distinct rock types. Rather the units are thought to show evidence of complex regolith transport and sorting processes. Here we report the results of a comprehensive study of all viable color MultiSpectral Imager (MSI) data to identify and characterize the distribution and nature of color units across the whole asteroid. Due to a spacecraft upset that resulted in contamination of the MSI optics, color images are affected with a scattered light problem that hampers interpretation of subtle color contrasts, even after a rigorous remediation. To constrain interpretations of the MSI color data we characterize this residual scattered light and demonstrate how complete correction would affect derived color ratios. Results of our comprehensive study are consistent with previous mapping—confirming that bright streaks, average regolith and dark soils fall on a mixing line, consistent with space weathering effects. We find that the ponded deposits do not fall on this putative mixing line. The color and reflectance of the ponded deposits are consistent with some combination of compositional, grain size and maturity variations from the average regolith. Additionally we show that spectral separation of the four units on ratio plots would only increase with full removal of residual scattered light, especially for features that are small in terms of pixels. Global analysis of the Eros color units illustrates complex regolith processes and grain sorting that may hold clues to understanding space weathering processes and the link between asteroids and meteorites.     

Trapping and adsorption of CO2 in amorphous ice: A FTIR study

The interaction of carbon dioxide and amorphous water ice at 95 K is studied using transmission infrared spectroscopy. Samples are prepared in two ways: co-deposition of the gases admitted simultaneously or sequential deposition, in which amorphous water ice (ASW) is grown first and CO₂ vapor is added subsequently. In either case, a fraction of the CO₂ molecules is found to interact with water in a way that gives rise to shifts and splittings in the infrared bands with respect to those of a pure CO₂ solid. In co-deposition experiments, a larger amount of carbon dioxide is trapped within the amorphous water than in sequential deposition samples, where a substantial proportion of molecules appears to be trapped in macropores of the ASW. The specific surface area of sequential samples is evaluated and compared to previous literature results. When the sequential samples are heated to 140 K, beyond the onset temperature at which water ice undergoes a phase transition, the CO₂ molecules at the pores relocate inside the bulk in a structure similar to that found in co-deposited samples, as deduced by changes in the shape of the CO₂ infrared bands.     

砾钢渣抗液化特性试验研究

陈化的钢渣作为土工回填材料是废弃钢渣循环利用的主要途径之一。按土的工程分类方法,将废弃钢渣划分为砾钢渣、粗钢渣和细钢渣。针对砾钢渣,考虑固结应力比、振动频率、围压和含砾量等影响因素开展动三轴试验研究。分析了砾钢渣的应力、应变和动孔隙水压力的特性,分析了砾钢渣试样的动强度与振动次数、动应变与振动次数、孔隙水压力与振动次数和动应力与动应变关系。采用Seed和Finn提出的饱和砂土动孔压计算模型分析砾钢渣的动孔压曲线类型,并与传统砂砾土的抗液化强度进行比较。得出砾钢渣的抗液化特性较好,工程中可以用砾钢渣替代传统的砂土、砂砾土、砂砾料和砂卵石作为回填料,解决砂砾资源日渐短缺的问题。     

湖南常德南斗姆湖地区早更新世砾石层砾组分析与沉积特征研究

为了查明洞庭盆地西缘早更新世砾石层沉积特征及沉积环境,在1:5万地质调查基础上,对常德南斗姆湖地区几处第四系砾石层剖面进行了较系统的测量与统计。结果表明: 砾石成分主要来源于寒武纪或前寒武纪地层。砾石分选系数S_a 为1.16~1.64,部分测点S_a>1.40,反映砾石形成时水动力很强,部分砾石层为快速堆积。砾石扁度F为2.06~2.32,大于2.0,砾石以扁平状为主。砾石普遍弱—中等风化,部分砾石强风化,反映砾石在沉积搬运过程中存在风化暴露。砾向分析显示古水流主要来源于SWW—NW向,表明砾石层形成时期古地貌与现有地貌有较大差异。剖面对比得出,区内砾石层是在冲洪积扇基础上发育的以辫状河相为主的沉积体。对研究区砾石层沉积相及古地貌的新认识,为区内金刚石原生矿床的找矿工作提供支撑。     

A two-layer model for studying 2D dissolved pollutant runoff over impermeable surfaces

Dissolved pollutants in stormwater are a main contributor to water pollution in urban environments. However, many existing transport models are semi-empirical and only consider one-dimensional flows, which limit their predictive capacity. Combining the shallow water and the advection–diffusion equations, a two-dimensional physically based model is developed for dissolved pollutant transport by adopting the concept of a ‘control layer’. A series of laboratory experiments has been conducted to validate the proposed model, taking into account the effects of buildings and intermittent rainfalls. The predictions are found to be in good agreement with experimental observations, which supports the assumption that the depth of the control layer is constant. Based on the validated model, a parametric study is conducted, focusing on the characteristics of the pollutant distribution and transport rate over the depth. The hyetograph, including the intensity, duration and intermittency, of rainfall event has a significant influence on the pollutant transport rates. The depth of the control layer, rainfall intensity, surface roughness and area length are dominant factors that affect the dissolved pollutant transport. Finally, several perspectives of the new pollutant transport model are discussed. This study contributes to an in-depth understanding of the dissolved pollutant transport processes on impermeable surfaces and urban stormwater management.