泥石流防治工程设计的若干问题初探

本文以南靖县帮科泥石流防治工程设计工作为例,选取了影响该泥石流形成的10项因子,利用模糊数学综合评判法对该泥石流危险程度进行了评价,为福建省泥石流预测预报及防治提供了定量的数学分析方法,有利于福建省科学防灾工作的进一步开展。此外,本文还对帮科泥石流防治工程中拦挡坝的设计方法进行了初步探讨,明确提出设计中坝体的稳定性演算可以简化为抗滑稳定演算等三个注意事项,并针对福建省的气候、土壤条件,提供了泥石流生物治理措施中的几种优势树种及其基本种植方案。相信本文对福建省其他泥石流防治工程设计具有借鉴意义。     

Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.     

Groundwater flow and solute transport at the Mourquong saline-water disposal basin, Murray Basin, southeastern Australia

Saline groundwater and drainage effluent from irrigation are commonly stored in some 200 natural and artificial saline-water disposal basins throughout the Murray-Darling Basin of Australia. Their impact on underlying aquifers and the River Murray, one of Australia's major water supplies, is of serious concern. In one such scheme, saline groundwater is pumped into Lake Mourquong, a natural groundwater discharge complex. The disposal basin is hydrodynamically restricted by low-permeability lacustrine clays, but there are vulnerable areas in the southeast where the clay is apparently missing. The extent of vertical and lateral leakage of basin brines and the processes controlling their migration are examined using (1) analyses of chloride and stable isotopes of water (²H/¹H and ¹⁸O/¹⁶O) to infer mixing between regional groundwater and lake water, and (2) the variable-density groundwater flow and solute-transport code SUTRA. Hydrochemical results indicate that evaporated disposal water has moved at least 100 m in an easterly direction and that there is negligible movement of brines in a southerly direction towards the River Murray. The model is used to consider various management scenarios. Salt-load movement to the River Murray was highest in a "worst-case" scenario with irrigation employed between the basin and the River Murray. Present-day operating conditions lead to little, if any, direct movement of brine from the basin into the river. Electronic Publication     

Crossover from Nonlinearity Controlled to Heterogeneity Controlled Mixing in Two-Phase Porous Media Flows

We use high resolution Monte Carlo simulations to study the dispersive mixing in two-phase, immiscible, porous media flow that results from the interaction of the nonlinearities in the flow equations with geologic heterogeneity. Our numerical experiments show that distinct dispersive regimes occur depending on the relative strength of nonlinearity and heterogeneity. In particular, for a given degree of multiscale heterogeneity, controlled by the Hurst exponent which characterizes the underlying stochastic model for the heterogeneity, linear and nonlinear flows are essentially identical in their degree of dispersion, if the heterogeneity is strong enough. As the heterogeneity weakens, the dispersion rates cross over from those of linear heterogeneous flows to those typical of nonlinear homogeneous flows.     

河流生态系统结构功能整体性概念模型

在完善与整合现有河流生态系统结构功能概念及模型的基础上,提出河流生态系统结构功能整体性概念模型。水文情势、水力条件和地貌景观格局是对河流生态系统结构与功能具有关键影响的3大生境要素,结构功能模型的核心是建立以3大生境要素为构架的生命支持系统与河流生命系统之间的相互作用和相互制约关系,同时考虑由于人类活动引起生境要素变化对于河流生态系统的影响。河流生态系统结构功能整体性概念模型由以下4种模型组成:河流四维连续体模型、水文情势-河流生态过程耦合模型、水力条件-生物生活史特征适宜模型以及地貌景观空间异质性-生物群落多样性关联模型,这4种模型的一体化整合,基本概括了河流生态系统结构功能的整体特征。     

不同尺寸煤颗粒分选机理的研究

针对不同用户对煤炭粒径有不同的要求,煤颗粒粒径在4mm以下,其中0.125mm粒径以下的颗粒不能超过10%的无烟煤精粉有大量的出口需求,而目前所用设备产品质量不能满足要求,而且效率低的状况,对煤颗粒粒级分选设备的工作原理进行了分析并提出改进方案。基于流体力学理论对改进的设备的工作原理进行了数学建模和算例分析,得出随粒径不同,沉降时间不同,因而在风流中沉降距离不同,从而可以利用风流达到对煤粒进行分选的目的。     

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.     

基于模糊-集对分析理论的泥石流危险性评价

集对分析理论是一种处理确定性和不确定性的定量系统分析方法。本文通过模糊联系度对集对分析理论中的差异度系数做进一步挖掘和分析,建立了模糊-集对分析算法,即通过模糊联系度挖掘样本数据讨论类别与相邻类别间的接近程度,得出该类别与相邻类别之间的同异反信息。为了验证模型的适用性,通过实测北京房山区和门头沟区6条泥石流小流域基础数据,进行了危险性评价,并将评价结果与传统评价理论进行对比分析。得出结论：模糊-集对分析理论可以深度挖掘样本类别与相邻类别之间的同异反关系,通过对比现场调查数据发现模糊-集对分析法对泥石流小流域的评价结果更切合实际,且评价结果与可拓学等评价结果基本一致,该方法具有较高的准确性和严密性。     

长江倒灌鄱阳湖原因及发生条件的量化指标

江湖倒灌对鄱阳湖流域水动力变化和流域水环境保护等方面有重要影响,正确认识江湖倒灌原因和倒灌发生条件对明晰江湖倒灌作用机理、研究倒灌强度和倒灌影响范围等方面具有重要意义。在剖析江湖倒灌原因的基础上,从非恒定流洪水波传播的角度出发,结合鄱阳湖为"河相"、"湖相"时江湖倒灌的特点,提出了长江作用强度指标和鄱阳湖作用强度指标,在此基础上引入江湖作用综合强度函数,依据实测资料,分析研究了江湖作用综合强度函数的关系表达式、江湖倒灌发生条件及量化指标。经验证,所提出的江水倒灌量化指标可区分江湖顶托和江湖倒灌现象,可实现对鄱阳湖为"河相"、"湖相"时的江湖倒灌预测,且提高了预测江湖倒灌起止时间、总历时和年内发生次数的准确率,成果可用于江湖关系研究和鄱阳湖流域水资源综合利用工程实践中。     

Sub-Alfvénic flows in the quiet and recurrent solar winds

Observed instances are given in this paper to show that sub-Alfvénic flow can be formed in the quiet and recurrent low-speed solar wind streams. This kind of flow appears in regions with abnormal enhancement of Alfvénic speed and is associated with a specific type of magnetic configuration.