动力定位系统发展状况及研究方法

动力定位系统（Dynamic Positioning System)是一种闭环的控制系统，其采用推力器来提供抵抗风、浪、流等作用在船上的环境力，从而使船尽可能地保持在海平面上要求的位置上，其定位成本不会随着水深增加而增加，并且操作也比较方便。本文对动力定位系统发展及各组成部分进行了介绍，以期对动力定位系统有个比较完整的认识。     

Coastal geomorphic evolution at the Denglou Cape, the Leizhou Peninsula

ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅＤｅｎｇｌｏｕＣａｐｅ ,ｉｎｔｈｅｓｏｕｔｈｗｅｓｔｏｆｔｈｅＬｅｉｚｈｏｕＰｅｎｉｎｓｕｌａ ,ｉｓａｔｔｈｅｎｏｒｔｈｍａｒｇｉｎｏｆｔｒｏｐｉｃａｌｚｏｎｅ .ＳｅｖｅｒａｌｒｅｓｅａｒｃｈｅｓａｎｄｃａｒｔｏｇｒａｐｈｉｅｓｏｆｔｈｅｒｅｇｉｏｎａｌｇｅｏｍｏｒｐｈｏｌｏｇｙａｎｄＱｕａｔｅｒ ｎａｒｙｇｅｏｌｏｇｙ ,ｗｈｉｃｈｗｅｒｅｃａｒｒｉｅｄｏｕｔｉｎｔｈｅｐａｓｔ,ａｌｌｉｎｃｌｕｄｅｔｈｉｓａｒｅａ (ＭＧＬ ,ＳＣＳＩＯ ,ＣＡＳ ,1 978;ＧＰＣＳＧＲＣＺＴ…     

一个基于TOPEX卫星极端海面风速预测的海洋地理信息系统

在基于 TOPEX卫星数据建立全球极端海面风速预测模型的基础上 ,开发出用于极端海面风速预测和可视化预测结果的海洋地理信息系统 (MGIS)。并论述全球极端海面风速预测的意义和 MGIS在预测过程中的重要性及必要性 ;给出全球极端海面风速预测的统计模型 ;简述极端海面风速预测海洋地理信息系统的结构、工作流程和功能 ;同时 ,对系统的预测结果进行初步分析     

A hierarchical real-time control architecture for a semi-autonomous underwater vehicle

This paper describes a real-time control architecture for Dual Use Semi-Autonomous Underwater Vehicle (DUSAUV), which has been developed at Korea Research Institute of Ships and Ocean Engineering (KRISO) for being a test-bed of development of underwater navigation and manipulator technologies. DUSAUV has three built-in computers, seven thrusters for six DOF motion control, one 4-function electric manipulator, one ballasting motor, built-in power source, and various sensors. A supervisor control system with GUI and a multi-purpose joystick is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers for real-time control purpose, while Microsoft OS product is ported in the supervisor computer for GUI programming convenience. A hierarchical control architecture, which consists of application layer, real-time layer and physical layer, has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in an ocean engineering basin of KRISO is also presented.     

The European coastal zone: characterization and first assessment of ecosystem metabolism

The geomorphic, oceanographic, terrestrial and anthropogenic attributes of the European coastal zone are described and published data on ecosystem function (primary production and respiration) are reviewed. Four regions are considered: the Baltic Sea, Mediterranean Sea, Black Sea and the European Atlantic coast including the North Sea. The metabolic database (194 papers) suffers from a non-homogeneous geographical coverage with no usable data for the Black Sea which was therefore excluded from this part of our study. Pelagic gross primary production in European open shelves is, by far, the most documented parameter with an estimated mean of 41 mmol C m⁻² d⁻¹, the lowest value is reported in the Mediterranean Sea (21 mmol C m⁻² d⁻¹) and the highest one in the Atlantic/North Sea area (51 mmol C m⁻² d⁻¹). Microphytobenthic primary production, mostly measured in shallow areas, is extrapolated to the entire 0–200 m depth range. Its contribution to total primary production is low in all regions (mean: 1.5 mmol C m⁻² d⁻¹). Although macrophyte beds are very productive, a regional production estimate is not provided in this study because their geographical distribution along the European coastline remains unknown. Measurements of pelagic community respiration are clearly too sparse, especially below the euphotic zone, to yield an accurate picture of the fate of organic matter produced in the water column. With a mean value of 17 mmol C m⁻² d⁻¹, benthic community respiration consumes approximately 40% of the pelagic organic matter production. Estuaries generally exhibit high metabolic rates and a large range of variation in all parameters, except microphytobenthic primary production. Finally, the problem of eutrophication in Europe is discussed and the metabolic data obtained in the framework of the Land–Ocean Interactions in the Coastal Zone (LOICZ) project are compared with available direct measurements of net ecosystem production.     

一类全局最优化问题的动态隧道方法

研究了连续变量函数的全局最优化问题 ,给出了动态隧道方法。该动态隧道方法由局部搜索和动态隧道 2个阶段构成。在局部搜索阶段用了动态系统方法。对全局最优化问题的实例进行了数值实验 ,数值结果表明了该方法的稳健性和有效性。     

三对角系统的最佳向后扰动分析

用一种新方法研究了三对角方程组及对称三对角方程组计算解的最佳向后扰动分析。由于这两类方程组的系数矩阵具有特殊结构 ,因而本文结果不能从已有结果直接导出。所用方法亦可用于研究 KKT及 SQD等结构线性系统的最佳向后扰动分析。     

海洋环境数据业务化处理与应用原型系统

简单介绍了原型系统的概念,并重点介绍了在原型开发模式下,建立的海洋环境数据业务化处理原型系统的数据处理流程、总体结构和主要功能。     

Rejection of Intracoelomic Invading Material by Leptosynapta inhaerens (Echinodermata: Holothuroida): A Process of Ecological Significance?

Abstract. The synaptid holothuroid Leptosynapta inhaerens has the ability to expel unwanted particles that enter its body cavity. Intracoelomic particles ( viz. experimentally injected carmine particles) are trapped either by a coelom-produced mucoid net or by specialized organs (the vibratile urnae) that occur in bands in some interradial areas. Whatever the trapping method, particles are incorporated into dense mucoid masses that move towards the posterior part of the body cavity, in the vicinity of the rectum. These aggregates then cross the rectal wall through rectal pores, mix with the faeces, and are eventually incorporated into the wall of the synaptid burrow. Clearance of foreign particles requires 2 to 3 days. The coelom-cleaning system of synaptids appears to be the most effective within the class Holothuroidea , being well designed for endofaunal organisms whose walls are delicate and easily rupture.