区域航空γ能谱场地球化学解释及预测方法的探讨

本文以“铀矿区域评价准则”为依据,试用因子分析主成分比值法,铀对钍(钾)的区域相对场法和铀成矿有利指数法,对我国YW-10和YW-10B两个测区的区域航空γ能谱场进行了地球化学解释及预测方法的研究,与已知矿区660测区从宏观上做了对比分析,并研究了γ能谱参数在走向长270km,宽50—70km空间上的分布变化规律。研究结果表明,这些方法对了解成岩时原始铀的分布及后期铀的地球化学活动规律,估计成岩、成矿阶段铀源岩可能提供的生铀量,识别铀成矿有利地区是有用的。     

方差分量估计方法在ERS—2卫星精密定轨中的应用

将方差分量估计（VCE）方法应用于ERS－2卫星的精密定轨,用SLR和PRARE资料计算了1998年前3个月的23个长度为5天的弧段（除了调整轨道的时段外,相邻弧段有两天的重叠）,从观测值残差分析和重叠弧段比较两个方面,考察VCE方法对定轨计算的影响,并给出了各组观测值的平均验后均方差,对观测值残差的分析表明,使用VCE方法明显地改善了观测值的拟合程度,但从阿卑（Abbey)标准对观测值残差的检验结果来看,使用VCE方法不能消除轨道中由力学模型和几何模型误差引入的系统差,重叠弧段比较的结果表明：（1）使用VCE方法缩小了重叠弧段的平均距离差,并改善了一部分权段明显不合理的偏离,使最后得到的轨道具有更均匀的精度,（2）相比较而言,VCE方法使相邻弧段靠拢的趋势在轨道切向体现得较为明显,由各组观测值的平均验后方差可见,说单个标准点观测值而言,部分SLR台站的观测资料在定轨计算中占有比其他观测资料更重的地位,纵观全文,使用VCE后得到的观测值的平衡验后均方差来确定资料的双重将比使用均方差更为合理。     

A three‐component end‐member analysis of streamwater hydrochemistry in a small Japanese forested headwater catchment

Intensive water sampling in conjunction with hydrological observations was conducted during three different rainstorms in order to understand the effects of rainfall events on the temporal variation of streamwater chemistry in a small headwater forest catchment. Concentrations of Na⁺ and SO₄^2? decreased as the discharge rate increased. Hydrograph separation of the components was made using the three‐component model based on the end‐members mixing analysis (EMMA). The three end‐members were:

• 1 the groundwater in the saturated zone that prescribes the chemistry of the baseflow;
• 2 the throughfall that dilutes the streamwater;
• 3 the groundwater in the transient saturated zone prescribed, which was dependent on the groundwater level.

When the groundwater level was lower, only the two components, groundwater in the saturated zone and throughfall, affected the streamwater chemistry. When the groundwater level rose and the saturated zone spread, the groundwater in the transient saturated zone became the third component. When the groundwater in the transient saturated zone contributed to the discharge, this component became the dominant source and the streamwater chemistry was affected by the groundwater chemistry in the transient saturated zone. When this component was discharged as the saturation overland flow, the streamwater chemistry was greatly affected by this component. Copyright © 2001 John Wiley & Sons, Ltd.     

Measuring magnetic field in the 'diamagnetic' ionosphere

Satellite magnetometers sometimes pass through regions of plasma, such as the terrestrial ionosphere, where the ionization is large enough that some of the original ambient field is excluded from the plasma. This reduction of field inside the plasma region comes from the 'diamagnetic' effect of the charged particles in their helical trajectory around the magnetic field lines. The (container of the) magnetometer will exclude the plasma, and a simple-minded approach, treating the ionosphere in the same way as for a conventional diamagnetic fluid, predicts that the field seen by the magnetometer will be somewhat larger than the (reduced) field in the plasma. However, the 'diamagnetic' properties of the ionosphere are quite different from those of a conventional diamagnetic. In particular, there is a 'reflection' of the ionospheric charged particles at the surface of the magnetometer, and the overall effect is that the magnetometer does actually measure the field present in the plasma before the magnetometer is inserted. Similarly, any leakage fields from the magnetometer have no effect in the magnetosphere.     

Bootstrapped discrete scale invariance analysis of geomagnetic dipole intensity

The technique of bootstrapped discrete scale invariance allows multiple time-series of different observables to be normalized in terms of observed and predicted characteristic timescales. A case study is presented using the SINT2000 time-series of virtual axial dipole moment, which spans the past 2 Myr. It is shown that this sequence not only bears a clear signature of a preferred timescale of about 55.6 Ka, but additionally predicts similar features (of shorter and longer duration) that are actually observed on the timescales of historical secular variation and dipole reversals, respectively. In turn, the latter two empirical sources both predict the characteristic timescale found in the dipole intensity sequence. These communal scaling characteristics suggest that a single underlying process could be driving dynamo fluctuations across all three observed timescales, from years to millions of years.     

Ionospheric effetcs of an intense geomagnetic storm

An investigation of the response of the mid-high, mid and low latitude critical frequency foF2 to the geomagnetic storm of 15 July 2000 is made. Ground-based hourly foF2 values (proportional to square root of peak electron density of F2-layer) from four chains of ionospheric stations located in the geographic longitude ranges 10°W–35°E, 60°E–120°E, 130°E–170°E, 250°E–295°E are used. Relative deviations of foF2 are considered. The main ionospheric effects for the considered storm are: long-duration negative disturbances at mid-high latitudes in summer hemisphere in sectors where the storm onset occurred in the afternoon/night-time hours; short-duration positive disturbances in the summer hemisphere at mid-high latitudes in the pre-sunset hours during the end of main phase-first stage of the recovery; small and irregular negative disturbances in the low latitude winter hemisphere which predominate during the main phase and first part of the recovery, and positive disturbances in both hemispheres at mid-high and mid latitudes prior to the storm onset irrespective of the local time. In addition, the validity of some physical mechanisms proposed to explain the F2 region behaviour during disturbed conditions is considered. gus-mansilla@hotmail.com     

The structure of the mid- and high-latitude ionosphere during the November 2004 storm event obtained from GPS observations

GPS data from the International GNSS Service (IGS) network were used to study the development of the severe geomagnetic storm of November 7–12, 2004, in the total electron content (TEC) on a global scale. The TEC maps were produced for analyzing the storm. For producing the maps over European and North American sectors, GPS measurements from more than 100 stations were used. The dense network of GPS stations provided TEC measurements with a high temporal and spatial resolution. To present the temporal and spatial variation of TEC during the storm, differential TEC maps relative to a quiet day (November 6, 2004) were created. The features of geomagnetic storm attributed to the complex development of ionospheric storm depend on latitude, longitude and local time. The positive, as well as negative effects were detected in TEC variations as a consequence of the evolution of the geomagnetic storm. The maximal effect was registered in the subauroral/auroral ionosphere during substorm activity in the evening and night period. The latitudinal profiles obtained from TEC maps for Europe gave rise to the storm-time dynamic of the ionospheric trough, which was detected on November 7 and 9 at latitudes below 50°N. In the report, features of the response of TEC to the storm for European and North American sectors are analyzed.     

Identification of modal parameters of non‐classically damped linear structures under multi‐component earthquake loading

A method for parametric system identification of classically damped linear system in frequency domain is adopted and extended for non‐classically damped linear systems subjected up to six components of earthquake ground motions. This method is able to work in multi‐input/multi‐output (MIMO) case. The response of a two‐degree‐of‐freedom model with non‐classical damping, excited by one‐component earthquake ground motion, is simulated and used to verify the proposed system identification method in the single‐input/multi‐output case. Also, the records of a 10 storey real building during the Northridge earthquake is used to verify the proposed system identification method in the MIMO case. In this case, at first, a single‐input/multi‐output assumption is considered for the system and modal parameters are identified, then other components of earthquake ground motions are added, respectively, and the modal parameters are identified again. This procedure is repeated until all four components of earthquake ground motions which are measured at the base level of the building are included in the identification process. The results of identification of real building show that consideration of non‐classical damping and inclusion of the multi‐components effect of earthquake ground motions can improve the least‐squares match between the finite Fourier transforms of recorded and calculated acceleration responses. Copyright © 2006 John Wiley & Sons, Ltd.