大菱鲆体重和主要体型比率性状的遗传动态分析

The objective of this study was to estimate genetic parameters of body width(BW)to body length(BL)ratio(BW/BL)and of body weight traits(BWT)in turbot,and to elucidate the genetic mechanism of the two traits during ontogeny by dynamic genetic analysis.From 3 to 27 months,BW,BL and BWT of each communally stocked fish were measured every 3 months.The BW/BL ratio was measured at different sampling ages.A twotrait animal model was used for genetic evaluation of traits.The results showed that the heritability values of BW/BL ratio ranged from 0.2168 to 0.3148,corresponding to moderate heritability.The BWT heritability values ranged from 0.2702 to 0.3479 corresponding to moderate heritability.The heritability of BW/BL ratio was lower than that of BWT,except at 3 months of age.Genetic correlation between BW/BL ratio and BWT decreased throughout the measurement period.Genetic correlations were higher than the phenotypic correlations.The current results for estimating genetic parameters demonstrate that the BW/BL ratio could be used as a phenotypic marker of fast-growing turbot,and the BW/BL ratio and BWT could be improved simultaneously through selective breeding.     

MedFlux: Investigations of particle flux in the Twilight Zone

The MedFlux project was devised to determine and model relationships between organic matter and mineral ballasts of sinking particulate matter in the ocean. Specifically we investigated the ballast ratio hypothesis, tested various commonly used sampling and modeling techniques, and developed new technologies that would allow better characterization of particle biogeochemistry. Here we describe the rationale for the project, the biogeochemical provenance of the DYFAMED site, the international support structure, and highlights from the papers published here. Additional MedFlux papers can be accessed at the MedFlux web site (http://msrc.sunysb.edu/MedFlux/).     

Optimal design of two-dimensional wings in ground effect using multi-objective genetic algorithm

The shape optimization of the 2-dimensional wing in ground effect (WIG) has been performed by the integration of CFD (computational fluid dynamics) and MOGA (multi-objective genetic algorithm). Because of the trade-off between the aerodynamic forces and the height stability, it is difficult to satisfy the design requirements of efficiency and stability at the same time. In this study, the lift coefficient, the lift-drag ratio and the static height stability are chosen as the objective functions to obtain the optimal wing profiles of a WIG craft. An NACA0015 airfoil is used for the baseline model; the aerodynamic characteristics of the base model are compared with that of the optimal solutions. The profile of the airfoil is constructed by four Bezier curves with fourteen control points resulting in the eighteen coordinates, which are adopted as the design variables. The optimal solutions of the multi-objective optimization are not unique but a set of the non-dominated optima: the Pareto frontiers or a Pareto set. As the results of the multi-objective optimization, the forty Pareto optima, which include high-lift, high-efficiency, and more stable airfoils on the edge of the 3-dimensional objective space, are obtained at thirty evolutions of the generation.     

粤东汕头近岸海域灾害地质风险综合评价

基于粤东汕头近岸海域地质和地球物理资料,通过对物探数据进行解译,查明了该区域内主要有活动断层、埋藏古河道、浅层气、不规则浅埋基岩等灾害地质类型,并结合层次分析法和模糊数学法建立了以断层、埋藏古河道、浅层气、浅埋基岩为评价指标的风险评价体系,得出海域内的不同区块的风险性等级,共分低、较低、中、较高、高5个等级。研究区超过70%的区域灾害风险不高,高风险区分布在榕江外河口、海门湾南部,主要受埋藏古河道和断层影响。较高—高风险区工程地质条件较差,存在的不良地质条件可能会给海上工程建设带来风险,选址时应尽量避开此类区域。评价结果与已查明的灾害分布特点吻合,对以后海上工程项目施工有一定的参考价值。     

Sliding mode fuzzy control: Theory and verification on a benchmark structure

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration reduction of large structures. The rule base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the non‐linear control algorithms. In general, fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation, and the non‐linearity of the control rule makes the controller more effective than linear controllers. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator–structure interaction, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as H_{mixed 2/∞}, optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is efficient and attractive, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient. Copyright © 2000 John Wiley & Sons, Ltd.     

Modelling dispersion in complex open channel flows: Fuzzy calibration (2)

Part 1 of this study assessed the effectiveness of dispersion models based around random particle tracking (RPT) applied an overbank flow in the Flood Channel Facility at HR Wallingford. Several of the RPT models that were used predicted the mixing behaviour of the tracer in the complex channel flow to within an acceptable accuracy. If there is no uniqueness in the model structure which can be used to represent the true system to within the limitations of the available observations, then this implies an inherent degree of ambiguity in our knowledge of the physically based model structure. This suggests that we should be less forthright in the optimisation of each individual model structure, and perhaps investigate more of the parameter combinations for each model which yield feasible simulations of the system. An alternative fuzzy calibration technique is introduced which avoids the optimisation process and takes account of uncertainties in the model structure, parameter sets and observed data in prediction.     

Domainal fabrics of hematite in schistose,shear zone-hosted high-grade Fe ores: The product of the interplay between deformation and mineralization

Schistose high-grade hematite orebodies (>64 wt % Fe) in the Iron Quadrangle, Minas Gerais, were formed in shear zones by hydrothermal alteration of the Paleoproterozoic Cauê BIF during the Transamazonian orogenesis. The ore is comprised of platy hematite (specularite) grains that define the foliation and overprint a relict banded martite-hematite fabric resembling, at first sight, a mylonite. The EBSD analyses of a m-scale schistose orebody from the Pau Branco mine show that specularite grew as elongated plates with the (00.1) plane parallel to the foliation. The population of the measured grain aspect ratio (GAR) is homogenous in different scales, and the longest axes of the crystals align with the stretching lineation (L//X) building continuous domains, or anastomose around stretched iron oxide aggregates and rootless fold hinges. The pole figure of the (00.1) plane shows usually a maximum centered on the pole of the foliation Z often elongated on a girdle perpendicular to the lineation L. The {10.4} pole figure has the configuration of a symmetric cleft girdle and the corresponding {11.0} and {10.0} pole figures present well developed girdles parallel to the foliation with an elongated maximum centered on X. Microstructures associated with crystal-plastic behavior and dynamic recrystallization are missing and the fabric of the orebody probably results from precipitation of strain-controlled oriented hematite plates and anisotropic syntaxial growth of favorably oriented grains with the intervention of hydrothermal fluids during Fe enrichment. The shear zone provided pathways for the percolation of mineralizing fluids under temperatures that varied from 140 to 350 °C or higher, under ductile or ductile–brittle conditions. The orthorhombic fabric and CPO (crystallographic preferred orientation) of the ore nevertheless contrast with the asymmetry of simple shear as observed in the torsion experiments by Siemes et al., 2010, Siemes et al., 2011, probably due to volume loss and possibly a flattening component of deformation in the ore zone.     

材料状态对干砂小应变特性的影响

利用注能虚拟质量(EIVM)共振柱系统进行了干砂小应变特性试验,研究了有效平均正应力、土样密度、剪应变幅值以及荷载往复次数对剪切模量和阻尼比的影响。试验结果表明,剪切模量随有效平均正应力与土样密度的增加而增加,而阻尼比的变化规律则与之相反,并且有效平均正应力对干砂小应变特性的影响程度比土样密度的影响程度大得多;随着剪应变的增加,剪切模量越来越小,而阻尼比越来越大;荷载往复次数对剪切模量基本没有影响,而对阻尼比有较大影响。     

GB/T 18316-2008的使用探讨

从抽样检验的基本原理出发,结合对空间数据产品特点的理解,针对空间数据产品的抽样检验,从抽样方案、检验内容、质量评价等方面对现行的抽样检验标准GB/T 18316-2008进行了分析。探讨了该标准存在的缺陷对客观、科学、公正评价空间数据产品质量的影响以及解决方法,对GB/T18316-2008的修订有一定借鉴意义。     

Appraisal of gas-hydrate/free-gas from VP/VS ratio in the Makran accretionary prism

Existence of gas-hydrate in the marine sediments elevates both the P- and S-wave seismic velocities, whereas even a small amount of underlying free-gas decreases the P-wave velocity considerably and the S-wave velocity remains almost unaffected. Study of both P- and S-wave seismic velocities or their ratio (V_P/V_S) for the hydrate-bearing sediment provides more information than that obtained by the P- or S-wave velocity alone for the quantitative assessment of gas-hydrate. We estimate the P- and S-wave seismic velocities across a BSR (interface between gas-hydrate and free-gas bearing sediments) using the travel time inversion followed by a constrained AVA modeling of multi channel seismic (MCS) data at two locations in the Makran accretionary prism. Using this V_P/V_S ratio, we then quantify the amount of gas-hydrate and free-gas based on two rock-physics models. The result shows an estimate of 12–14.5% gas-hydrate and 4.5–5.5% free-gas of the pore volume based on first model, and 13–20% gas-hydrate and 3–3.5% free-gas of the pore volume based on the second model, respectively.