A model of the formation and development of ocean shear wave

Ａｍｏｄｅｌｏｆｔｈｅｆｏｒｍａｔｉｏｎａｎｄｄｅｖｅｌｏｐｍｅｎｔｏｆｏｃｅａｎｓｈｅａｒｗａｖｅ￥ＱｉａｏＦａｎｇｌｉａｎｄＺｈａｎｇＱｉｎｇｈｕａ（ＦｉｒｓｔＩｎｓｔｉｔｕｔｅｏｆＯｃｅａｎｏｇｒａｐｈｙ，ｓｔａｔｅｏｃｅａｎｉｃＡｄｍｉｎｉｓ...     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

一种产生Fuzzy拓扑和Smooth拓扑的方法及其应用

利用邻域度给出了1种由fuzzy拓扑产生smooth拓扑的方法;利用smooth拓扑的自身结构给出了smooth拓扑产生fuzzy拓扑的方法,讨论了它们在映射间的联系并引入了强smooth拓扑并获得了一些重要结果.     

晚第四纪冲绳海槽北段CaCO3含量的时空变化及其控制因素

对取自冲绳海槽北段的6个沉积岩心进行了CaCO3含量、粒度和铀系同位素分析，结合氧同位素数据和海槽其他钻孔的相应结果，探讨了冲绳海槽北部晚第四纪以来CaCO3含量的垂向与横向变化特征。结果表明，冲绳海槽北段沉积总体上表现为全新世CaCO3含量高、晚更新世CaCO3含量低的“大西洋型”碳酸盐演化特征，但冲绳海槽北段和中部的碳酸盐演化特征并不一致，海槽内西坡、槽底和东坡的不同部位其演化特征也存在较大差异。碳酸盐含量的变化与沉积物粒度特征密切相关，晚第四纪冲绳海槽碳酸盐演化的时空差异是多种因素相互作用的结果。     

不同软基处理方法适用性比较

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。     

面向GIS的线状符号开放式多元设计方案

提出一种跨越专业限制，用于快速绘制任意曲率曲线的开放式线状符号“组合配置法”设计方案，即用主干线、辅助线、辅助圆和点符号等四种子线型的有机组合描述目标线型，并详细论述了其数据结构、文件结构及子线型的实现方法。同时还提出伪码法用于解决满足国标要求的图廓整饰线，并对裁剪法作了简要阐述。上述线型设计方法已成功设计、实现并应用于“海底地形成图系统(MBChar)”，已服务于大陆架海底成图项目。     

几丁糖酯原料药稳定性研究

该文建立高效凝胶渗透色谱法 (HPGPC) ,明胶比浊法 ,氧瓶燃烧法三种分析方法考察海洋硫酸多糖药物几丁糖酯的稳定性 ,采用这三种方法分别考察几丁糖酯原料药在高温、高湿、强光照射及加速条件下分子量及分布宽度、样品中硫酸根含量及样品含量的变化情况。结果表明 :三种方法均适用于几丁糖酯的稳定性考察 ,几丁糖酯在上述影响因素条件下稳定性良好     

Fuzzy Optimum Model of Semi-Structural Decision for Lectotype Optimization of Offshore Platforms

In the process of concept design of offshore platforms, it is necessary to select the best from feasible alternatives through comparison and filter. The criterion set, used to evaluate and select the satisfying alternative, consists of many qualitative and quantitative factors. Therefore, the selection is a problem of multicriteria and semi- structural decision- making. Different from traditional methods in semi- structural decision- making, a new framework and methodology is presented in this paper for evaluation of offshore platform alternatives. First, the criterion set is established for the evaluation of alternatives. Next, the approach is studied to construct the relative membership degree matrix, in which both qualitative and quantitative factors are consistent with the uniform calculating standard. And then a new weight-assessing method is developed for calculation of the weights based on the relative membership degree matrix. Finally, a multi-hierarchy fuzzy optimum model is adopted to select t     

东营城区高精度三维地震采集方法研究

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.