二连盆地可地浸砂岩型铀成矿的再认识

笔者从铀成矿条件入手 ,分析了二连盆地在基底演化期、含矿建造形成期以及后生改造成矿期各阶段对可地浸砂岩型铀矿的控制作用 ,认为二连盆地在含矿建造形成期是由众多分割性强的 ,构造演化和沉积变迁自成体系 ,并具有多物源、近物源特点的小凹陷所组成。同时 ,综合其他控制砂岩型铀矿的因素 ,确定了二连盆地是以发育潜水 层间氧化带砂岩型铀矿为其主要成矿类型 ,且矿床规模以中、小型为主 ,具有成群成带产出的特点。     

电吸附找矿方法

电吸附找矿方法是找隐伏矿的新方法.它是指通过物理化学手段来发现后生地球化学异常的找矿方法.它是建立在异常元素地球化学理论和野外地电提取法的理论基础之上.利用电吸附找矿方法在一些已知矿床进行找矿效果试验,获得了很好的效果,说明了该方法找矿的有效性.     

凤太矿集区金铅锌矿地球化学特征及找矿方向

通过对金、铅锌矿成矿规律和地球化学特征的研究,讨论陕西凤太矿集区今后的找矿方向,并初步圈定了4处找矿靶区.     

Provenance analysis and tectonic setting of the Ordovician clastic deposits in the southern Puna Basin, NW Argentina

Provenance studies on Early to Middle Ordovician clastic formations of the southern Puna basin in north-western Argentina indicate that the sedimentary detritus is generally composed of reworked crustal material. Tremadoc quartz-rich turbidites (Tolar Chico Formation, mean composition Q_t89 F7 L4) are followed by volcaniclastic rocks and greywackes (Tolillar Formation, mean Q_t33 F42 L25). These are in turn overlain by volcaniclastic deposits (mean Q_t24 F30 L46) of the Diablo Formation (late Arenig–early Llanvirn) that are intercalated by lava flows. All units were deformed in the Oclóyic Orogeny during the Middle and Late Ordovician. Sandstones of the Tolar Chico Formation are characterized by Th/Sc ratios > 1, La/Sc ratios ≈ 10, whereas associated fine-grained wackes show slightly lower values for both ratios. LREE (light rare earth elements) enrichment of the arenites is ≈ 50× chondrite, Eu/Eu* values are between 0·72 and 0·92, and flat HREE (heavy rare earth elements) patterns indicate a derivation from mostly felsic rocks of typical upper crustal composition. The ε_{Nd(t = sed)} values scatter around −11 to −9. The calculated Nd-T_DM residence ages vary between 1·8 and 2·0 Ga indicating contribution by a Palaeoproterozoic crustal component. The Th/Sc and La/Sc ratios of the Tolillar Formation are lower than those of the Tolar Chico Formation. Normalized REE (rare earth elements) patterns display a similar shape to PAAS (post-Archaean average Australian shale) but with higher abundances of HREEs. Eu/Eu* values range between 0·44 and 1·17, where the higher values reflect the abundance of plagioclase and feldspar-bearing volcanic lithoclasts. Average ε_{Nd(t = sed)} values are less negative at −5·1, and Nd-T_DM are lower at 1·6 Ga. This is consistent with characteristics of regional rocks of upper continental crust composition, which most probably represent the sources of the studied detritus. The rocks of the Diablo Formation have the lowest Th/Sc and La/Sc ratios, lower LREE abundances than the average continental crust and are slightly enriched in HREEs. Eu/Eu* values are between 0·63 and 1·17. The Nd isotopes (ε_{Nd(t = sed)} = −3 to −1; T_DM = 1·2 Ga) indicate that one source component was less fractionated than both the underlying Early Ordovician and the overlying Middle Ordovician units. Synsedimentary vulcanites in the Diablo Formation show the same isotopic composition. Our data indicate that the sedimentary detritus is generally composed of reworked crustal material, but that the Diablo Formation appears to contain ≈ 80% of a less fractionated component, derived from a contemporaneous continental volcanic arc. There are no data indicating an exotic detrital source or the accretion of an exotic block at this part of the Gondwana margin during the Ordovician.     

Metallogenic mechanisms of super-large Cu and Au deposits in the Dexing region and simulating experiments

Based on the results of previous studies and under the direction of the theory of “ore deposit genesis”, the authors made use of high temperature and high pressure experimental facilities and conditions at the Tectono-geochemistry Research Room under the State Key Laboratory of Ore Deposit Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, and put the focus on the multi-source of tectonically controlling ore-forming materials, the characteristics of multi-stage and multi-episode hydrothermal activities and mineralization and the characteristics of multi-genesis and multi-ore deposition so as to shed light on the metallogenic mechanisms of super-large Cu and Au deposits. In addition simulating experiments were made on multi-stage and multi-episode tectonic activities and rock and ore deformation, multi-stage and multi-episode tectonic activities and mobilization and migration of ore-forming materials, and multi-stage and multi-episode tectonic activities and superimposition and enrichment of ore-forming materials. The experimental results showed that under the action of multi-stage and multi-episode tectonic stress the deformation and fragmentation of not only rocks and ores have been intensified, and but also the ore-forming materials originally disbursed in the rocks and ores have been mobilized and migrated and superimposed and enriched. The experimental results also provided the scientific experimental data and grounds for deep-going research on the rules of metallogenesis and geneses of super-large ore deposits in the Dexing region, Jiangxi Province.     

福建永安丰门坑多金属矿地质特征及找矿前景

永安丰门坑多金属矿呈似层状、层状、透镜状,贮存在寒武系林田组下段钙质碎屑岩中,矿床具明显的层控和热液叠加改造特征,为沉积-热液改造型多金属矿床。该多金属矿床的发现,为我省在寒武系林田组中寻找该类矿床提供新的目标。     

硼同位素在矿床学中的应用研究

硼在自然界有两种稳定同位素11B和10B,常采用δ(11B)/10-3来表示不同地质体的同位素组成。由于硼同位素在不同地质体中的分馏作用大,在较大温度范围内岩浆-热液流体中的高活动性和化学性质稳定等方面的优势,使硼同位素在地球科学研究中的作用越来越广泛。控制硼同位素分馏的主要因素是硼源。一般情况下,非海相的硼酸盐矿物和与之相关的电气石的δ(11B)值为负值,而在某些盐湖卤水和与海相环境有关的硼酸盐矿物的δ(11B)值则为正值。目前,硼同位素示踪主要应用于块状硫化物矿床、与花岗岩有关的热液矿床以及盐湖矿床的研究。随着硼同位素分馏机制及其在不同环境地质样品中分布特征的深入研究,硼同位素在解决矿床的成矿物质来源、矿床成因和成矿作用等方面将发挥更大的作用。     

3D打印技术在矿床学中的应用研究——以内蒙古乌力吉敖包萤石矿Ⅲ号矿体为例

3D打印(3D printing)是一种以三维模型为样本的快速成形技术,它通过逐层打印或粉末熔铸的方式来构造需要的立体图形。本文从3D打印技术的原理及其发展现状入手,重点列举内蒙古乌力吉敖包萤石矿,利用3D打印机打印具有现实可观性的地质体实体,探讨3D打印技术作为新兴的科技手段应用于矿床学教学与研究的应用价值和发展前景。研究发现,3D打印技术在矿体三维可视化中的应用符合地质图件立体化和3D打印技术多领域化的趋势,未来3D打印技术在地质领域的应用也有助于开拓矿床学教学和研究的新方式与新思路。     

大兴安岭地区内生铜矿床的成因类型、成矿时代与成矿动力学背景

大兴安岭地区位于兴蒙造山带的东段,构造、岩浆活动强烈,蕴藏着丰富的内生有色金属、贵金属矿产资源。本文通过对该区内生铜矿床的地质特征、成因类型和年代学研究,初步将区内内生铜矿床划分为斑岩型、浅成热液高硫化型(铜银、铜锡)和接触交代型三种成因类型,除铜锡矿床外,它们的成矿作用均与高钾钙碱系列I型花岗质岩浆密切相关;其中斑岩型和浅成热液高硫化型(铜、银)的成矿分别发生在485Ma、180~170Ma和170~160Ma;而浅成热液高硫化型(铜锡)矿床与A型花岗质岩浆相关,成矿在150~135Ma之间;接触交代型与它们相伴生,主要发生在180~160Ma和150~135Ma。其成矿动力学背景分别与早古生代兴安地块与松嫩地块的拼合碰撞造山、中侏罗世的西伯利亚板块和华北板块的陆缘增生带碰撞缝合造山与早白垩世碰撞造山后的地壳伸展减薄作用过程相适应,矿床在不同阶段的造山挤压与伸展转换或造山期后的伸展阶段就位,这项研究为深入研究该区内生多金属成矿规律提供了科学依据。     

桂北376铀矿床烃气地球化学研究

烃气测量法在锡、金、铜、铅锌等金属矿床找矿中得到了广泛应用,而该技术在花岗岩型铀矿找矿中的应用鲜有报道。本文对桂北376铀矿床已知矿体开展了烃气测量试验,结果显示：相较于其他金属矿,该铀矿区花岗岩和土壤中总烃含量极低,而且花岗岩总烃含量(平均19.42μL/kg)高于上覆土壤(平均6.32μL/kg)。花岗岩中U与多数烃气组分呈负相关,与重烃呈正相关,重烃在U迁移过程中作用强于轻烃;花岗岩烃气标准化配分模式以C₁、iC₄和C₂^-正异常为特征;铀矿化程度与iC₄/nC₄、(C₁+iC₄+C₂^-)/(C₂+C₃+nC₄)及C₂^-/C₃^-比值呈正相关,与C₂₊/∑C比值呈负相关等可为寻找铀矿提供依据。3...