马岭油田北三区污水回注的实验研究

根据马岭油田北三区油田水性质，结合污水与地层水混合的静态实验结果分析，发现污水回注对地层可能引起不同程度的伤害。同时，模拟地层条件做岩心流动实验。将采出的污水回注到地层与地层水混合后，亦会使地层渗透率下降，且随着污水含量的增加，渗透率伤害程度增大。     

用翁氏模型图版设计早期油气田(藏)开发方案

由于缺乏早期资料，设计早期油气田（藏）开发方案是非常困难的。在制作翁氏模型的Qctm/No-ER图版和ER-ctR图版过程提出根据探明储量No、经济极限产量Qc、假定达到峰值产量的时间tm、最终采收率ER，由翁氏模型的Qctm/No-ER图版求取增长指数b，由翁氏模型ER-ctR图版求取ctR，再求出其他参数及所有的油气田（藏）开发指标，完成早期油气田（藏）开发方案设计。     

基于广义Kопытов模型及乙型水驱曲线的综合预测法

将广义Kопытов预测模型和乙型水驱曲线方法有机的结合起来，得到了油田开发中后期——递减时期的一种预测水驱开发油田的含水率、产油量、产水量及其相应的累积产量随开发时间变化的方法，此方法克服了在水驱油田预测开发指标中二者所存在的局限性。     

高峰公司100号矿体矿床建模与矿山生产动态管理的研究

重点论述高峰锡矿 10 0号矿体的矿床数学经济模型的建立 ,分析模型在采矿、选矿等矿山生产动态管理中的作用及意义     

A non-linear stress-stiffness model for geomaterials at small to intermediate strains

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.     

Chlorophyll modulation of mixed layer thermodynamics in a mixed-layer isopycnal General Circulation Model — An example from Arabian Sea and equatorial Pacific

Western tropical Indian Ocean, Arabian Sea, and the equatorial Pacific are known as regions of intense bio-chemical-physical interactions: the Arabian Sea has the largest phytoplankton bloom with seasonal signal, while the equatorial Pacific bloom is perennial with quasi-permanent upwelling. Here, we studied three dimensional ocean thermodynamics comparing recent ocean observation with ocean general circulation model (OPYC) experiment combined with remotely sensed chlorophyll pigment concentrations from the Coastal Zone Color Scanner (CZCS). Using solar radiation parameterization representing observations that a higher abundance of chlorophyll increases absorption of solar irradiance and heating rate in the upper ocean, we showed that the mixed layer thickness decreases more than they would be under clear water conditions. These changes in the model mixed layer were consistent with Joint Global Ocean Flux Study (JGOFS) observations during the 1994-1995 Arabian Sea experiment and epi-fluorescence microscopy (EFM) on samples collected during Equatorial Pacific Ocean Climate Study (EPOCS) in November, 1988. In the Arabian Sea, as the chlorophyll concentrations peak in October (3 mg/m³) after the summer plankton bloom induced by coastal upwelling, the chlorophyll induced biological heating enhanced the sea surface temperature (SST) by as much as 0.6‡C and sub-layer temperature decreases and sub-layer thickness increases. In the equatorial Pacific, modest concentrations of chlorophyll less than 0.3 mg/m³ is enough to introduce a meridional differential heating, which results in reducing the equatorial mixed layer thickness to more than 20 m. The anomalous meridional tilting of the mixed layer bottom enhances off equatorial westward geostrophic currents. Consequently, the equatorial undercurrent transports more water from west to east. We proposed that these numerical model experiments with use of satellite andin situ ocean observations are consistent under three dimensional ocean circulation theory combined with solar radiation transfer process.     

The optical features and hydrocarbon-generating model of “barkinite” from Late Permian coals in South China

Leping coal is known for its high content of “barkinite”, which is a unique liptinite maceral apparently found only in the Late Permian coals of South China. “Barkinite” has previously identified as suberinite, but on the basis of further investigations, most coal petrologists conclude that “barkinite” is not suberinite, but a distinct maceral. The term “barkinite” was introduced by (State Bureau of Technical Supervision of the People's Republic of China, 1991, GB 12937-91 (in Chinese)), but it has not been recognized by ICCP and has not been accepted internationally.In this paper, elemental analyses (EA), pyrolysis-gas chromatography, Rock-Eval pyrolysis and optical techniques were used to study the optical features and the hydrocarbon-generating model of “barkinite”. The results show that “barkinite” with imbricate structure usually occurs in single or multiple layers or in a circular form, and no definite border exists between the cell walls and fillings, but there exist clear aperture among the cells.“Barkinite” is characterized by fluorescing in relatively high rank coals. At low maturity of 0.60–0.80%R_o, “barkinite” shows strong bright orange–yellow fluorescence, and the fluorescent colors of different cells are inhomogeneous in one sample. As vitrinite reflectance increases up to 0.90%R_o, “barkinite” also displays strong yellow or yellow–brown fluorescence; and most of “barkinite” lose fluorescence at the maturity of 1.20–1.30%R_o. However, most of suberinite types lose fluorescence at a vitrinite reflectance of 0.50% Ro, or at the stage of high volatile C bituminous coal. In particular, the cell walls of “barkinite” usually show red color, whereas the cell fillings show yellow color under transmitted light. This character is contrary to suberinite.“Barkinite” is also characterized by late generation of large amounts of liquid oil, which is different from the early generation of large amounts of liquid hydrocarbon. In addition, “barkinite” with high hydrocarbon generation potential, high elemental hydrogen, and low carbon content. The pyrolysis products of “barkinite” are dominated by aliphatic compounds, followed by low molecular-weight aromatic compounds (benzene, toluene, xylene and naphthalene), and a few isoprenoids. The pyrolysis hydrocarbons of “barkinite” are mostly composed of light oil (C₆–C₁₄) and wet gas (C₂–C₅), and that heavy oil (C₁₅⁺) and methane (C₁) are the minor hydrocarbon.In addition, suberinite is defined only as suberinized cell walls—it does not include the cell fillings, and the cell lumens were empty or filled by corpocollinites, which do not show any fluorescence. Whereas, “barkinite” not only includes the cell walls, but also includes the cell fillings, and the cell fillings show bright yellow fluorescence.Since the optical features and the hydrocarbon-generating model of “barkinite” are quite different from suberinite. We suggest that “barkinite” is a new type of maceral.     

甘肃小柳沟钨多金属矿地质特征及成矿模式

小柳沟钨多金属矿于 90年代初发现 ,目前已具大型、超大型规模。共有 4个矿床。成矿主要与长城系朱龙关群和隐伏花岗岩有关。该矿床成矿物质来源具双重性 ,成矿温度为中高温 ,成矿流体为中等盐度 ,同位素计算模式年龄确定其成矿于加里东期。矿床成因属于火山喷发沉积—岩浆热液改造矿床。     

Propriétés fractales de la fragmentation et processus stochastiques de fracturation : approche géométrique 3D à l'aide du modèle ObsifracFractal properties of fragmentation and stochastic fracturing processes: geometrical 3D approach by OBSIFRAC model

A numerical rock fragmentation model was elaborated, producing a 3D puzzle of convex polyhedra, geometrically described in a database. In the first scenario, a constant proportion of blocks are fragmented at each step of the process and leads to fractal distribution. In the second scenario, division affects one random block at each stage of the process, and produces a Weibull volume distribution law. Imposing a minimal distance between the fractures, the third scenario reveals a power law. The inhibition of new fractures in the neighbourhood of existing discontinuities could be responsible for fractal properties in rock mass fragmentation. To cite this article: L. Empereur-Mot, T. Villemin, C. R. Geoscience 334 (2002) 127–133.     

可调滞回模型的磁流变阻尼器及其试验

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。