内蒙古6种沙生柳树叶片解剖结构的抗旱性分析

利用常规石蜡切片、光学显微镜观察的方法,对内蒙古地区6种沙生柳树叶片的解剖结构进行比较分析。结果表明,6种柳树的叶片结构具有相似性,均为全栅型的等面叶,表皮均具有角质层,主脉为双韧维管束,栅栏组织发达,5～6层。差异表现在角质层和表皮厚度、主脉和叶片厚度、栅栏组织的厚度等方面。应用SAS和SPSS软件进行分析,根据几种柳树叶片的结构特征,得出抗旱性大小顺序依次为：黄柳、砂杞柳、沙柳、乌柳、筐柳、小红柳。     

镜泊湖火山台网防雷地网的建设

镜泊湖火山台网位于崇山峻岭之中,经常遭到强雷电袭击。为了使台网设备稳定高效运转,减轻雷电地干扰,我们对台网的防雷设施进行了建设,取得了非常好的防雷效果。     

扩底桩抗拔承载特性数值分析

基于通用软件ABAQUS,建立了扩底抗拔桩三维弹塑性有限元模型,通过对模型的计算与分析,探讨了扩底桩的抗拔承载特性。为验证数值模型的可靠性,将数值计算得到的荷载－位移关系曲线与试桩资料进行比较,两者吻合较好,表明本文所建立的模型可较好地模拟扩底抗拔桩的工作性状。通过计算与分析,探讨了扩底抗拔桩的轴力、侧摩阻力分布特征,桩身和扩大头周围土体变形与塑性应变的发展规律,以及扩大头的挤压作用对扩大头周围土体竖向应力的影响。同时,通过变动参数研究了扩大头的形状、土体的性质对扩底桩抗拔承载力的影响,结果表明,扩大头直径和扩大头周围土体的性质对抗拔承载力的影响较大,而扩底高度的影响相对较小。     

政府职能在减轻地震灾害中的作用

0前言 地震安全,事关人民群众生命财产安全和经济社会可持续发展。随着社会的发展和国家实力的增强,国家已把地震安全作为社会公共安全的重要组成部分,惨烈的2008年汶川大地震,更把地震安全推到了众人关注的地位。采取各种有效措施,最大限度地减轻地震灾害损失,已成为各级人民政府义不容辞的职责。     

庆阳黄土冻融环境下的特性研究

为了解冻融作用对黄土湿陷性的作用效果,以Q3黄土为研究对象,采用增(减)湿法配制不同含水量黄土试样,测试黄土在无补水条件下受温度影响的冻融变形、压缩变形和湿陷变形;对原状黄土进行颗粒分析及基本物理力学参数试验。分析表明:(1)黄土是否产生冻胀取决于其含水量是否超过"临界冻胀含水量"。(2)冻融黄土与原状黄土相比压缩变形量较大,把部分浸水湿陷变形转化为压缩变形,冻融作用使黄土的湿陷性弱化。(3)冷冻黄土在相同温度下,含水量越大,湿陷系数越小;在同一含水量下,冻结温度愈低湿陷系数愈小。     

Experimental validation of a simplified model for rolling isolation systems

Rolling isolation systems (RISs) protect mission‐critical equipment and valuable property from earthquake hazards by decoupling the dynamic responses of vibration‐sensitive objects from horizontal floor motions. These responses involve the constrained rolling of steel balls between bowl‐shaped surfaces. The light damping of steel balls rolling between steel plates can be augmented by adhering thin rubber sheets to the plates, thereby increasing the rolling resistance and decreasing the displacement demand on the RIS. An assessment of the ability of lightly‐ and heavily‐damped RISs to mitigate the hazard of seismically induced failures requires high‐fidelity models that can adequately capture the systems' intrinsic nonlinear behavior. The simplified model presented in this paper is applicable to RISs with any potential energy function, is amenable to both lightly‐ and heavily‐damped RISs, and is validated through the successful prediction of peak responses for a wide range of disturbance frequencies and intensities. The validated model can therefore be used to compute the spectra of peak floor motions for which displacement demands equal capacity. These spectra are compared with representative floor motion spectra provided by the American Society of Civil Engineers 7–10. The damping provided by rolling between thin viscoelastic sheets increases the allowable floor motion intensity by a factor of 2–3, depending on the period of motion. Acceleration responses of isolation systems with damping supplied in this fashion do not grow with increased damping, even for short‐period excitations. Copyright © 2013 John Wiley & Sons, Ltd.     

Determining drag coefficients and their application in modelling of turbulent flow with submerged vegetation

Vegetation is a key aspect of water resources and ecology in natural rivers, floodplains and irrigation channels. The hydraulic resistance of the water flow is greatly changed when submerged vegetation is present. Three kinds of drag coefficients, i.e., the drag coefficient for an isolated cylinder, the bulk drag coefficient of an array of cylinders and the vertically distributed or local drag coefficient, have been commonly used as parameters to represent the vegetation drag force. In this paper, a comprehensive experimental study of submerged stems in an open channel flow is presented. Empirical formulae for the three drag coefficients were obtained based on our experimental results and on data from previous studies. A two-layer model was developed to solve the mean momentum equation, which was used to evaluate the vertical mean velocity profile with each of the drag coefficients. By comparing the velocity distribution model predictions and the measurement results, we found that the model with the drag coefficient for an isolated cylinder and the local drag coefficient was good fit. In addition, the model with the bulk drag coefficient gave much larger velocity values than measurements, but it could be improved by adding the bed friction effect and making choice of the depth-averaged velocity within the canopy layer.     

电测井中电流参数对地层的分辨能力分析

常规电测井一般通过测量供电电极的电流和测量电极之间的电位差来计算围岩的视电阻率并划分地层界面,而忽略了对电流参数的利用。本文基于欧姆定律,通过供电电极电流的变化定性分析其周围岩矿石电阻的变化,进而用电流强度变化曲线识别地层属性。理论分析和试验结果表明,供电电极电流大小取决于电极的接触电阻,而视电阻率大小取决两个测量电极之间或供电与测量电极之间介质的电阻率总和,因此,电流比视电阻率对地层的灵敏度要高一些。绘制电流强度测井曲线可以准确划分地层层位,确定地层厚度,且不增加成本。