三峡引水工程秦巴段输水隧洞稳定性分析

三峡引水工程秦巴段隧洞总长占线路总长的80%。为了分析隧洞施工及运营中可能发生的工程地质问题,在地质调查、地应力测量和岩石力学参数测试的基础上,利用Ansys有限元软件对引水工程北部不同深度、不同截面形态的隧洞围岩的应力重分布情况进行了模拟计算,得到了圆形隧洞、城门形隧洞和马蹄形隧洞围岩的应力分布结果。利用Hoek-Brown强度准则,得到了隧洞围岩的强度/应力比值,进而对不同深度、不同截面形态的隧洞围岩的稳定性进行了分析。初步认为:隧洞埋深小于1000m时,应优先考虑圆形隧洞和马蹄形隧洞;埋深大于1000m时,应优先考虑城门形隧洞。这项研究成果为引水工程深埋隧洞的设计提供了参考依据。     

用套筒致裂法测试岩体应力反弹性模量与讨论

在改进套筒致裂装置性能的基础上,使压力-体积曲线的记录与处理得到改善,对潘三矿东采区的测试实践表明,得出的压力-体积曲线较好地反映了钻孔围岩随内压增加所表现出的力学性质。还探讨了如何通过改进套筒致裂技术来实现由围岩应力测试发展到原岩应力测试以及围岩损伤区的测定。     

Experimental study on the mechanism of non-synchronism of seismo-electromagnetic radiation precursors

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｒｏｕｇｈ２０－ｏｄｄｙｅａｒｓ’ｏｂｓｅｒｖａｔｉｏｎａｎｄｓｔｕｄｙａｆｔｅｒｔｈｅ１９７６Ｔａｎｇｓｈａｎｇｒｅａｔｅａｒｔｈｑｕａｋｅ,ｔｈｅｓｅｉｓｍｏ－ｅｌｅｃｔｒｏｍａｇｎｅｔｉｃｒａｄｉａｔｉｏｎｐｒｅｃ...     

Experimental research on mechanical characteristics and strength criterion of rock of triaxial unloading tests under different stress pathsEI北大核心CSCD

By carrying out triaxial unloading test under different stress paths on rock, the complete stress-strain curves, deformation characteristics and its strength criterion are studied. The test results show that the relation between lateral strain and confining pressure firstly is linear, and then is nonlinear in the total stage of unloading confining pressure. And its growth rate is about 3 to 5 times the growth rate of the axial strain. It shows obvious lateral dilatancy, and the degree of dilatancy is related to the unloading path. According to the area that is enclosed by confining pressure and volumetric strain curve, it can be seen that the greater the confining pressure is before unloading, the more the energy releases. Deformation modulus decreases gradually with the unloading confining pressure, and increases with the initial confining pressure; the relation between deformation modulus and confining pressure shows negative exponential distribution overall. At the same unloading paths, the reduction of the deformation modulus increases with the increase of initial confining pressure. The Poisson's ratio rises up continually, and the variation law with the confining pressure can be well described by nonlinear. Failure characteristics of rock are mainly shear failure. The strength characteristics of rock can be well characterized by using the Mohr strength criterion of power function. These conclusions provide reliable theoretical reference and guiding significance for the deep mining of the underground metal mine.     

目标样本粒度判据在海湾环境演变研究中的运用——以福建前湖湾为例

高密度采集福建前湖湾海岸剖面133个泥沙样品做粒度分析,其频率曲线显示多种粒度分布特征,预示多种沉积环境的变化。采集研究剖面周边海滩、河口浅滩、河口、滨海沼泽和海岸沙丘等已知环境的样品作为目标样本。将目标样本沉积参数平均粒径(Mz)、标准偏差(σ)、峰态(Kg)设为判别参数,利用Excel计算海岸剖面样品与目标样本参数的距离,筛选最小距离样品,归为已知目标样本的同类。据此,分析了海岸剖面蕴含的6个沉积环境变化阶段。利用剖面底部淤泥测年14C=(328 15±170)a BP,和剖面上部泥炭测年14C=(24 130±100)a BP,了解这一变化发生的年代。自(32 815±170)a BP以来,前湖湾经历了河口浅滩-河口、沙丘-河口-滨海沼泽-海滩-沙丘等海岸环境演变过程。     

煤层底板原位综合测试及突水危险性评估

在实施井下钻孔水压致裂地应力测量的同时,评价岩层阻水性能,确定导升带高度,做到一孔多用。测试区实际观测表明,泥岩、粉砂岩、中砂岩、灰岩阻水性能由大到小,导升高度则由小变大,平均导升高度约32m; 地应力测量表明,该测试区原始地应力状态为SH＞Sv＞Sh,最大水平主应力方向NE至NEE。突水临界指数评价表明,-550m水平采煤工作面掘进时突水的可能性较大,应当采取防范措施。     

非线性Hoek-Brown强度折减技术

为精确执行非线性Hoek-Brown(HB)强度折减,首先在p-q空间分析了HB曲线任意点切线与Mohr-Coulomb(MC)准则的对应关系,推求了HB屈服函数材料折减系数和强度折减系数的关系,提出了潜入强度折减系数的HB弹塑性分析模型,介绍了在Flac3D平台上二次开发实现非线性HB强度折减的基本思路。对一边坡算例用本文方法和简化Bishop法进行了对比分析,计算结果表明,潜入强度折减系数的HB弹塑性模型计算获得的边坡潜在滑动面形态、位置和相应的安全系数,与简化Bishop法计算结果很接近。     

鄂尔多斯盆地柳林地区下奥陶统冶里组竹叶状石灰岩的沉积环境和成因机制

鄂尔多斯盆地柳林地区早奥陶世冶里期沉积以浅灰色中薄层泥质白云岩为主,发育大量竹叶状碳酸盐岩。不同类型的竹叶状碎屑反映了不同的沉积环境。笔者对研究区剖面内的竹叶状碎屑进行分析和研究后认为,竹叶状石灰岩的形成可以分为早期沉积物的形成和早期沉积物的破碎、搬运和再沉积两个阶段。     

Warmer-Get-Wetter or Wet-Get-Wetter? A Criterion to Classify Oceanic Precipitation

In this study, the temporal and spatial variations of observed global oceanic precipitation during 1979–2010 are investigated. It is found that the global trend in precipitation during this period varies at a rate of 1.5%/K of surface warming while the rate is 6.6%/K during 2006–2010. The precipitation is highly correlated with Sea Surface Temperature(SST) in both the temporal and the spatial patterns since the strong 1997–98 El Nino event. Considering the distributions of precipitation and SST, seven oceanic regions are classified and presented using the observed Global Precipitation Climatology Project(GPCP) data and Extended Reconstructed Sea Surface Temperatures, version 3(ERSST.v3) data. Further examining the mechanisms of the classified oceanic precipitation regions is conducted using the Tropical Rainfall Measuring Mission(TRMM) satellite, GFDL-ESM-2G model precipitation and SST data and Hadley Center sea ice and SST version 1(Had ISST1) data. More than 85% of global oceanic precipitations are controlled by either one or both of the warmer-get-wetter mechanism and wet-get-wetter mechanism. It is estimated that a 0.5 SST signal-to-noise ratio, representing the trend of SST time series to the standard deviation, is a criterion to distinguish the mechanism of a region. When the SST ratio is larger than 0.5, the precipitation of this region is controlled by the warmer-get-wetter mechanism. SST, rather than the humidity, is the pivotal factor. On the other hand, when the SST ratio is less than 0.5, the precipitation is controlled by the wet-get-wetter mechanism. The SST variability is a significant factor contributing to the precipitation variation.     

Experimental research on the mechanical properties of methane hydrate-bearing sediments during hydrate dissociation

This paper describes studies of the effect of hydrate dissociation on the safety and stability of methane hydrate-bearing sediments. Methane hydrates within the sediments were dissociating under the conditions of a confining pressure of 0.5 MPa, 1 MPa, 2 MPa and a temperature of −5 °C. After 6 h, 24 h, or 48 h, a series of triaxial compression tests on methane hydrate-bearing sediments were performed. The tests of ice-clay and sediments without hydrate dissociation were performed for comparison. Focusing on the mechanical properties of the sediments, the experimental results indicated that the shear strength of the ice-clay mixtures was lower than that of the methane hydrate-bearing sediments. The strength of the sediments was reduced by hydrate dissociation, and the strength tended to decrease further at the lower confining pressures. The secant modulus E_S of the sediments dropped by 42.6% in the case of the dissociation time of the hydrate of 48 h at the confining pressure of 1 MPa; however, the decline of the initial yield modulus E₀ was only 9.34%. The slower hydrate dissociation rate contributed to reducing the failure strength at a declining pace. Based on the Mohr–Coulomb strength theory, it was concluded that the decrease in strength was mainly affected by the cohesive reduction. Moreover, the mathematical expression of the M–C criterion related to the hydrate dissociation time was proposed. This research could be valuable for the safety and stability of hydrate deposits in a permafrost region.