枯竭型油气藏储气库射孔完井技术

枯竭型油气藏储气库一般采用套管射孔完井方式,注、采气需要“缓进大出”,要求储层与井筒良好沟通.针对枯竭型油气藏储气库射孔完井工艺复杂、要求高、地层保护难度大等特点,阐述了射孔方式及工艺优选、射孔参数优化、射孔压实带改造技术、多级负压起爆技术等内容.该项射孔完井技术在中石化文96储气库13口井成功应用,取得了良好的效果.     

断裂和裂缝的分形特征

在详细剖析断裂和裂缝组成和结构相似性的基础上, 计算了贝尔断陷T₅和T₂两层构造图上断裂信息维和10口井布达特群岩心裂缝信息维, 分析了影响断裂和裂缝信息维的因素, 达到了从断裂信息维去预测裂缝分布的目的.影响断裂和裂缝信息维的因素包括密度、延伸长度、断层性质以及岩性, 但从根本上讲断层性质及岩性对信息维影响体现在断裂的密度上, 因此信息维应该是断裂发育程度的度量, 利用断裂信息维与裂缝信息维关系、裂缝信息维与裂缝密度关系预测裂缝的分布, 有利的裂缝发育带有3个区域, 与现今见油气井分布吻合.      

Modeling 3D thermal fracture propagation by transient cooling using virtual multidimensional internal bonds

Thermal fracturing can play an important role in development of unconventional petroleum and geothermal resources. Thermal fractures can result from the nonlinear deformation of the rock in response to thermal stress related to cold water injection as well as heating. Before the rock reaches the final failure stage, material softening and bulk modulus degradation can cause changes in the thermo‐mechanical properties of the solid. In order to capture this aspect of the rock fracture, a virtual multidimensional internal bond‐based thermo‐mechanical model is derived to track elastic, softening, and the failure stages of the rock in response to the temporal changes of its temperature field. The variations in thermo‐mechanical properties of the rock are derived from a nonlinear constitutive model. To represent the thermo‐mechanical behavior of pre‐existing fractures, the element partition method is employed. Using the model, numerical simulation of 3D thermal fracture propagation in brittle rock is carried out. Results of numerical simulations provide evidence of model verification and illustrate nonlinear thermal response and fracture development in rock under uniform cooling. In addition, fracture coalescence in a cluster of fractures under thermal stress is illustrated, and the process of thermal fracturing from a wellbore is captured. Results underscore the importance of thermal stress in reservoir stimulation and show the effectiveness of the model to predict 3D thermal fracturing. Copyright © 2016 John Wiley & Sons, Ltd.     

Modeling three‐dimensional hydraulic fracture propagation using virtual multidimensional internal bonds

Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd.     

The role of eddies in solute transport and recovery in rock fractures: Implication for groundwater remediation

A better understanding of solute transport and retention mechanism in rock fractures has been challenging due to difficulty in their direct observations in microscale rough‐walled fractures. Six representative troughs in a rough‐walled fracture were selected for microscale observations of eddy formation with increasing flow velocity and its effect on spatiotemporal changes of solute concentration. This experimental study was enabled by a microscale visualization technique of micro particle image velocimetry. With increasing flow velocity (Re ≤ 2.86), no eddies were generated, and solutes along the main streamlines transported rapidly, whereas those near the wall moved slowly. A larger amount of solutes remained trapped at all troughs at Re = 2.86 than Re < 1. For Re = 8.57, weak eddies started to be developed at the troughs on the lee side, which little contributed to overall solute flushing in the fracture. Accordingly, a large of amount of water was needed for solute flushing. The flow condition of 1 < Re < 10, before a full development of eddies, was least favourable in terms of time and amount of remediation fluid required to reach a target concentration. After large eddies were fully developed at troughs on the lee side for Re = 17.13, solutes were substantially reduced by eddies with less amount of water. Fully developed eddies were found to enhance solute transport and recovery, as opposed to a general consensus that eddies trap and delay solutes. Direct inflow into troughs on the stoss side also made a great contribution to solute flushing out of the troughs. This study indicates that fully developed eddies or strong inflows at troughs are highly possible to form for Re > 10 and this flow range could be favourable for efficient remediation.     

上海及其邻区潜在地质灾害的构造背景与成因机理

本文基于上海及其邻区活动断裂构造及有关地区潜在地质灾害特点的研究,论证了上海及其邻区潜在地质灾害的三种基本类型及其构造背景与成因机理;指出:上海及其邻区楔形断裂系统的存在与活动是诱发有关地区潜在地质灾害的主导因素。文中明确指出了上海及其邻区楔形断裂系统的研究在相关地区进行潜在地质灾害评价与预测方面的应用前景与发展方向。     

An empirical approach to estimating population parameters from censored fracture-length distributions

Most fracture data sets are length-censored because of incomplete exposure at the surface, so estimating values of parameters of the sampled populations is difficult. Unless the form of the distribution function of the population is known, or one which is analytically tractable is assumed, length-censoring presents formidable problems in determining population parameters. Tests conducted on experimental fracture patterns developed in clay samples subjected to simple shear loading are the basis of a distribution-free way to estimate population parameters. Comparison of random samples of censored and uncensored fracture lengths shows that a useful, homogeneous data set consists of those cracks which lie entirely within the sampling area (two-ended cracks). The properties of this data set can be used to estimate the mean and variance of uncensored data. Estimates of the maximum fracture length of uncensored data, using the variance and maximum length of these two-ended cracks, show good agreement with measured values. Knowledge of the mean, variance, and maximum value of fracture-length populations are of interest in engineering and hydraulic studies, as well as in remote sensing studies of the Earth and other planets. Application of these results to data on rock masses are subject to the caveat that different crack-growth mechanisms in clay and rock may affect the accuracy of the calculations.     

渤海陆缘地震的力学特征和成因

渤海陆缘是华北强震活动区,如1966年的邢台震群,1967年的河间地震,1969年的渤海地震,1975年的海城地震,1976年的唐山震群和1983年的菏泽地震,都是在该区发生的。显然,深入研究该地区的构造运动和地震成因是有重要科学意义的。本文拟从应力场角度进行研究。     

Fractal reconstruction of sea-floor topography

Sea-floor bathymetric profiles exhibit features at many different scales of length; this suggests that they could be described as fractals. An algorithm interpolating a fractal line between points has been used to reconstruct bathymetric profiles from a few data points. In general, this fractal line has the same Fourier amplitude spectrum as real bathymetry, and, if the parameters of the interpolation are suitably chosen, it has a very similar appearance. The success of this fractal reconstruction algorithm for the sea-floor raises the possibility that it could be used to extrapolate, from data collected at one scale, the properties of the sea-floor at finer scales, and that similar techniques could be used to interpolate a surface between bathymetric profiles. The fractal character is a sign that the processes that shape the sea-floor are scale invariant and suggests that the renormalization group technique could be used to model these processes.     

岩石压剪性断裂特性及Ⅰ—Ⅱ型复合断裂判据

本文系统阐述了岩石压剪性断裂的特性,认为金属断裂力学复合断裂判据基本上不适用于压剪状态下的岩石斯裂;在此基础上,提出了新的岩石压剪性断裂判据:2COSθ_0/2(cosθ_0-1)[(1+1/f~2)~(1/2)-1]K_Ⅰ+[(sin θ_0/2-3sin 3θ_0/2)(1+1/f~2)~1/2+4sin θ_0/2]K_Ⅱ=4K_(Ⅰc),推导了起始断裂角ψ_0,说明了实验验证结果,指出了该判据在工程地质领域中的应用途径。