青藏高原东北缘瑞利面波成像：射线理论与程函方程结果的比较

青藏高原东北缘是青藏高原隆升的前缘地带,其构造变形特征一直是研究的热点。前人在该区域进行过面波成像研究,但不同结果存在较明显的差异,可能与不同成像方法的分辨率有关,此次研究分别使用基于射线的方法和基于程函方程的方法进行了瑞利波相速度成像。笔者对比了20 s、30 s和60 s的成像结果,两种方法的结果表现出相似的速度特征。总体的速度特征与研究区域的主要构造单元分布相吻合,青藏高原东北缘表现出低速异常,鄂尔多斯块体表现出高速异常。在银川河套地堑,基于程函方程的成像在20 s和30 s得到更明显的低速异常,低速异常体的分布与地堑的轮廓吻合更好,说明基于程函方程的方法对数据利用更充分。     

斑岩型和浅成低温热液型矿床成矿流体与找矿预测研究:以华南若干典型矿床为例

斑岩型和浅成低温热液型矿床是全球铜、钼、金、银的主要来源之一,具有重要经济价值。这两类矿床之间通常存在紧密的时空关系,对其成矿流体性质和演化的解剖不仅有利于探究金属沉淀机制,也有助于揭示两者之间的内在成因联系。本文在综述国内外重要研究前沿基础上,以中国华南富家坞斑岩型铜钼(金)矿、桐村斑岩钼矿,以及邱村和安村浅成低温热液金矿为例,系统总结了斑岩型和浅成低温热液型矿床流体特征、演化规律和金属沉淀机制、探讨了从斑岩型到浅成低温热液型流体演化的“气相迁移”模型,并以福建紫金山铜金矿床为例,介绍了应用流体填图进行找矿预测的实例。     

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.     

大兴安岭西坡比利亚谷银铅锌多金属矿床成因

比利亚谷银铅锌多金属矿床位于大兴安岭西坡的得尔布干成矿带,它是近些年来在该区新发现的一座大型银铅锌多金属矿床。该矿床矿体主要呈脉状、细脉浸染状、角砾状赋存于塔木兰沟组中—基性火山岩和满克头鄂博组酸性火山岩中的NW向断裂体系内。根据矿石的结构、构造以及矿物之间的共生组合、穿切关系,将成矿过程从早到晚划分为硅化石英+黄铁矿阶段（Ⅰ）、石英+黄铁矿+闪锌矿阶段（Ⅱ）、石英+黄铁矿+闪锌矿+方铅矿+辉银矿+黄铜矿±黝铜矿阶段（Ⅲ）、石英+黄铁矿+方解石+萤石±蛋白石阶段（Ⅳ）;详细的石英、闪锌矿流体包裹体研究揭示：成矿早阶段（Ⅰ、Ⅱ）石英中发育WL型、C型包裹体,包裹体完全均一温度为188~254℃,盐度（w（NaCl））为1.83%~4.79%,密度为0.81~0.94 g/cm³,属于中低温、低盐度的H₂O-NaCl-CO₂体系;成矿主阶段（Ⅲ）石英、闪锌矿中发育WL型包裹体,包裹体完全均一温度为160~188℃,盐度为3.69%~7.15%,密度为0.92~0.96 g/cm³,属于低温、中低盐度的H₂O-NaCl-CH₄体系;成矿晚阶段（Ⅳ）石英中发育WL型、L型包裹体,WL型包裹体完全均一温度为130~165℃,盐度为1.22%~3.53%,密度为0.93~0.95 g/cm³,属于低温、低盐度的H₂O-NaCl体系。流体包裹体H-O同位素地球化学特征揭示：早阶段流体的δ¹⁸O_H2O-SMOW值为-6.3‰~-5.9‰,δD_H2O-SMOW值为-163.4‰~-162.7‰;成矿主阶段流体的δ¹⁸O_H2O-SMOW值为-14.4‰,δD_H2O-SMOW值为-165.4‰~-162.0‰;成矿晚阶段流体的δ¹⁸O_H2O-SMOW值为-19.1‰,δD_H2O-SMOW值为-150.7‰;硫化物Pb同位素比值分别为²⁰⁶Pb/²⁰⁴Pb=18.435~18.513、²⁰⁷Pb/²⁰⁴Pb=15.579~15.675、²⁰⁸Pb/²⁰⁴Pb=38.283~38.603。这种特征揭示,该矿床成矿流体为低温、低盐度的H₂O-NaCl-CH₄体系,早期为残余岩浆水和大气降水混合、中—晚期大气降水逐渐增加;成矿物质源于壳幔混合源区;成矿过程以流体混合方式导致成矿元素聚集和沉淀,矿床成因类型为与陆相火山-次火山作用有关的低硫化型浅成热液铜（银）铅锌多金属矿床;其整体与大兴安岭西坡同类型矿床相似,成矿作用发生在早白垩世（131.3 Ma）,与古太平洋板块俯冲产生的弧后伸展环境相关。     

区域地震台网历史震相数据整合与共享服务

区域地震台网震相数据是区域地震台网产出的重要成果,是开展地球科学研究的重要资料。整理全国31个省份1973-2008年区域地震台网纸质震相报告和地震卡片,按统一格式录入震相数据,建立数据共享服务系统。文中系统阐述区域地震台网的发展过程、历史震相数据的整合、地震观测报告的主要内容及震级的测定方法,并介绍了历史震相数据共享服务系统和快速索引下载方法,为科研人员提供共享服务。     

含孔隙、裂隙地层随钻多极子声波测井理论

储层岩石中普遍存在孔隙与裂隙,对钻井中的测井声波产生重要影响.基于孔、裂隙介质弹性波理论,导出了随钻声波测井的井孔声场表达式.据此考察了地层裂隙密度与含气饱和度的变化时井孔内随钻多极子模式波（斯通利波、弯曲波和螺旋波）的速度、衰减与灵敏度以及地层纵、横波的响应特征.裂隙密度与含气饱和度对模式波的速度频散与衰减都有影响,且两参数的值越大,影响越大.具体来说,速度对裂隙密度更敏感,而衰减对含气饱和度更敏感.具有"艾里相"特征的随钻偶极和四极子波在地层含气时产生强烈衰减,可以作为判断地层含气的一个明显指示.理论模拟与实际测井数据分析结果符合较好.     

Non-invasive lab test in the monitoring of vadose zone contaminated by light non-aqueous phase liquid

We discuss a strategy capable of a quantitative long-term monitoring of water saturation and volume variation of light non-aqueous phase liquids in the soil. The goal was reached monitoring a controlled sand cell contaminated with classical gasoline over 124 days, using geophysical methods such as electrical resistivity tomography, induced polarization and ground penetrating radar. We show that empirical relations, linking the water saturation to the physical parameters measured as resistivity from electrical resistivity tomography and travel time from georadar with advanced processing, are good tools for this purpose. The consistence of the proposed process is validated by both good overlap of results carried out from electrical resistivity tomography and georadar and theoretical models simulating the actual experiment.     

STUDY ON FOCAL DEPTH OF THE MS5.4 CANGWU EARTHQUAKE IN GUANGXI

On July 31th, 2016, a magnitude 5.4 earthquake struck Cangwu Country, Guangxi Zhuang Autonomous Region, it was the largest earthquake recorded by Guangxi Seismological Network since it set up. The number of people affected by the earthquake had reached 20 000, and the direct economic losses caused by the earthquake were nearly 100 million Yuan. After the earthquake, USGS provided a global earthquake catalog showing that the focal depth of Cangwu earthquake was about 24.5km. However, the result given by the Global Centroid Moment Tensor showed the focal depth of this earthquake was 15.6km. However, the result obtained by Xu Xiaofeng et al. using CAP method was 5.1km. It was clear that the focal depths of Cangwu earthquake given by different institutions were quite different from each other. However, accurate focal depth of the earthquake has important significance for exploring the tectonic mechanism near the epicenter, so it is necessary to further determine the more accurate depth of the Cangwu earthquake. In order to further accurately determine the focal depth of Cangwu earthquake, we used the global search method for travel-time residual to calculate the focal depth of this earthquake and its error range, based on the regional velocity model, which is a one-dimensional velocity model of the Xianggui tectonic belt produced by the comprehensive geophysical profile. Then, we inverted the focal mechanism of this earthquake with the CAP method. Based on this, the focal depth of Cangwu M_S5.4 earthquake was further determined by the method of the Rayleigh surface wave amplitude spectrum and the sPL phase, respectively. Computed results reveal that the focal depth of this earthquake and its error range from the travel-time residual global search method is about(13±3)km, the focal depth inverted by CAP method is about 10km, the focal depth from sPL phase is about 10km, and the focal depth from Rayleigh surface wave amplitude spectrum is about 9~10km. Finally, we confirmed that the focal depth of Cangwu M_S5.4 earthquake is about 10km, which indicates that this earthquake still occurred in the upper crust. In the case of low network density, the sPL phase and Rayleigh wave amplitude spectrum recorded by only 1 or 2 broadband stations could be used to obtain more accurate focal depth. The focal depth's accuracy of Cangwu M_S5.4 earthquake in the USGS global earthquake catalog has yet to be improved. In the future, we should consider the error of the source parameters when using the USGS global earthquake catalog for other related research.     

VELOCITY CHARACTRISTICS OF SHANXI AND ADJACENT AREA AND ITS TECTONIC SIGNIFICANCE

In order to acquire a better velocity structure of the crustal and uppermost mantle beneath Shanxi area, we obtain the group and phase velocities of Rayleigh wave of the periods 8s to 50s in Shanxi and adjacent area using ambient seismic noise recorded at 216 broad-band stations. All available vertical-component time series for 2014 have been cross-correlated to yield estimates of empirical Rayleigh wave Green's function. Group and phase velocity dispersion curves for Rayleigh wave are measured for each interstation path by applying frequency-time analysis. It describes finer velocity structure of the crust and upper mantle in Shanxi, which reflects the geological structure characteristics at different depths. The resolution is within 50km and the resolution of part periods can reach 40km.The Rayleigh wave group and phase speed maps at short periods(8~18s and 10~22s)show clear correlations with shallow geological structures. Mountain areas on both sides of Shanxi depression zone show apparent high-velocity anomaly, except for low-velocity anomaly in the Taiyuan Basin, Linfen-Yuncheng Basin and Weihe Basin. Especially, the areas of Youyu County-Pianguan County-Kelan County-Shuozhou City and Jingle County-Lishi District of Lüliang City in Lüliang Mountains, and Yu County-Fuping County-Yi County and Yangcheng County-Licheng County in Taihang Mountains, present higher velocity anomaly. In addition, the velocity is lowest in the Weihe Basin, and the amplitude of low velocity decreases gradually from the south to the north of the basins in Shanxi, which probably is related to the process of gradual stretching and development of the Shanxi rift zone from the southwest to the northeast. The obvious velocity difference across the latitude of 38°N exists at 18~30s period of phase and 24~35s period of group velocity maps, which is probably related to the deep and shallow Moho depth variation in the south and north of Shanxi and the suture zone of ancient blocks including "hard" southern block and "soft" northern block. At the same time, the research result of receiver function reveals that partial melting of the lower crust occurs in the northern Taihang Mountains, while the southern section remains stable(Poisson's ratio is above 0.3 in the northern Taihang Mountains and 0.25~0.26 in the southern section). The phase velocity map at 30~50s period clearly shows NW velocity gradient belt, and the low velocity anomaly in the northeast side may be related to Cenozoic volcanism. Meanwhile, the eastern border of Ordos block is the western faults of central basins in Shanxi depression zone. However, some research results indicate that the above border is Lishi Fault in the surface, inferring that the Ordos block shows a shape of wide in the upper and narrow in the lower part from the surface to deep. The Datong volcanic area at 18~45s period of phase and 24~35s period of group velocity maps shows low velocity of trumpet shape from shallow to deep, related to the upwelling of hot material from lower mantle in the Cenozoic causing a large area of intense magmatic activity. It indicates the more specific upwelling channel of Datong volcanoes simultaneously.     

SOURCE PARAMETERS OF THE CANGWU MS5.4 EARTHQUAKE, 31 JULY, 2016

On July 31^st, 2016, an earthquake of M_S5.4 occurred in Cangwu County, Guangxi Zhuang Autonomous Region, which is the first M_S ≥ 5.0 earthquake in coastal areas of southern China in the past 17a. The moderate earthquake activities have come into a comparatively quiet period in coastal areas of southern China for decades, so the study about the Cangwu M_S5.4 earthquake is very important. However, differernt research institutions and scholars have got different results for the focal depth of the Cangwu M_S5.4 earthquake. For this reason, we further measured the focal depth by using CAP method and sPL phase method. sPL phase was first put forward by Chong in 2010. It is often observed between P and S wave of continental earthquakes with epicentral distance of about 30km to 50km. The energy of sPL phase is mainly concentrated on the radial component. Arrival time difference between sPL phase and direct P wave is insensitive to epicentral distancs, but increases almost linearly with the increase of focal depth. Based on these characteristics and advantages, sPL phase method is chosen to measure the focal depth of Cangwu M_S5.4 earthquake in the paper. First of all, we selected the broadband waveform data through seismic stations distributed mainly in Guangxi and adjacent provinces from Data Management Centre of China National Seismic Network and Guangxi Earthquake Networks Center. And an appropriate velocity model of Cangwu area was constructed by the teleseismic receiver function method. Then, the focal mechanism and focal depth of Cangwu M_S5.4 earthquake were determined by using the CAP(Cut and Paste)method. Next, we compared the synthetic waveforms simulated by F-K forward method of different focal depth models with the actual observed waveforms. According to the difference of arrival times between sPL and Pg phases, we finally obtained the focal depth of Cangwu earthquake. The results show that the focal depth is 11km measured by CAP method and 9km by sPL phase method. Based on the focal mechanism solution, isoseismal shapes, aftershocks distributions and investigation on spot, we conclude that the Cangwu M_S5.4 earthquake is a left-lateral strike-slip earthquake which occurred in the upper crust. Our preliminary analysis considers that the seismogenic structure of Cangwu earthquake is a north-northwest branch fault, and the control fault of this earthquake is the Hejie-Xiaying Fault.