耗能-隔震柔性底层钢管混凝土-钢筋混凝土组合框架的实验研究

本文用钢管混凝土柱作为结构底层耗能柱、用承重墙和隔震器控制结构底层倒塌破坏,从而提出了一种新的耗能-隔震柔性底层结构体系。通过本文12根钢管混凝土柱和文献[7]中7根钢管混凝土柱的低周疲劳实验,初步确定了钢管混凝土柱地震损伤模型的参数;通过两个钢管混凝土-钢筋混凝土三层框架模型和一个纯钢筋混凝土三层框架模型的拟动力实验,研究和比较了两类结构体系的地震损伤。     

拱形波纹钢屋盖动力特性测试及分析

拱形波纹钢屋盖是一种新颖的金属拱形薄壳结构，在我国已经得到了广泛的应用。由于结构的复杂性，目前有关的理论研究尚不够深入，动力研究还很少有人涉及。以18m和30m两种跨度的W666型拱形波纹钢屋盖为研究对象，测试了拱在竖向平面内振动时的频率、振型及阻尼。在所提简化计算模型的基础上，采用有限元方法计算了结构的动力特性，其结果与试验数据符合较好。测试和分析结果为该结构的动力反应研究提供了方便。     

声幅—变密度测井原理及测井解释方法

对利用声幅—变密度测井判断固井质量的测井原理和工作方式及资料的解释处理进行了介绍,并对固井中出现的各种可能曲线反映进行了详尽的分析,阐述了资料解释中不确定因素。     

Rocking response of flexible circular foundations on layered media

The analysis of the response of a flexible circular foundation on layered media due to an arbitrarily distributed vertical loading is presented. The analysis is based on the ‘ring method’ approach, i.e. discretization of the foundation in a set of concentric rings. The arbitrarily distributed loading is expanded in the circumferential direction in a Fourier series. The influence coefficient matrix of soil for each element of the series is evaluated utilizing the stiffness matrix approach. The stiffness matrix of the foundation is obtained from the finite difference energy method approach. Numerical examples illustrate the influence of several soil-foundation parameters on the rocking response of a foundation. Results are presented in terms of displacement and soil reaction distributions and impedance functions point to significantly different responses of flexible and rigid foundations.     

Gas emission prediction and recovery in underground coal mines

Strata gas can be released and captured from non-active and active gas resources either from virgin or relaxed strata, both prior to and when mining activities take place. The high and irregular gas emissions associated with high production longwall mining have provided a need to optimise the methods used to predict these gas levels and the ventilation requirements for gas dilution. A forecast of gas emissions during development drivage and longwall mining indicated possible gas and ventilation problems requiring the introduction of various gas drainage techniques and in maintaining the necessary air quantities in ventilation systems to satisfy the statutory gas limitations for various coal production rates. Although there are sound principles used in world-recognised methods of gas emission prediction, a new approach developed from long-term practical experience in underground gassy coal mine practices and gas-rock mechanics studies appear most suitable for local conditions and mining systems in use. The Lunagas ‘Floorgas' and ‘Roofgas' geomechanical and gas emission models offer an effective solution to these problems. Both programs are the most advanced engineering, numerical tools available to calculate gas source contributions to total gassiness and improve the accuracy and quality of gas control, gas capture technologies and ventilation system design.     

Experimental Study on Response Performance of VIV of A Flexible Riser with Helical Strakes

Laboratory tests were conducted on a flexible riser with and without helical strakes. The aim of the present work is to further understand the response performance of the vortex induced vibration (VIV) for a riser with helical strakes. The experiment was accomplished in the towing tank and the relative current was simulated by towing a flexible riser in one direction. Based on the modal analysis method, the displacement responses can be obtained by the measured strain. The strakes with different heights are analyzed here, and the response parameters like strain response and displacement response are studied. The experimental results show that the in-line (IL) response is as important as the cross-flow (CF) response, however, many industrial analysis methods usually ignore the IL response due to VIV. The results also indicate that the response characteristics of a bare riser can be quite distinct from that of a riser with helical strakes, and the response performance depends on the geometry on the helical strakes closely. The fatigue damage is further discussed and the results show that the fatigue damage in the CF direction is of the same order as that in the IL direction for the bare riser. However, for the riser with helical strakes, the fatigue damage in the CF direction is much smaller than that in the IL direction.     

基于半数值方法的限弯器剪弯刚度分析

柔性管缆限弯器存在接触非线性导致剪弯刚度分析困难。为此先基于悬臂梁方程建立剪弯刚度理论模型;然后构建考虑接触边界的锁合结构数值模型,得到其扭转刚度曲线;最后结合理论分析和数值计算求得考虑接触非线性的限弯器剪弯刚度曲线,并同传统的整体数值方法相比较,验证该半数值分析方法的有效性。对比发现基于半数值方法的限弯器剪弯计算效率远高于传统数值方法,其结果误差也满足工程需求;并且限弯器锁合结构处受接触边界影响有明显的非线性;限弯器子梁这一短梁结构基于Timoshenko梁理论计算的结果精度更高也更保守。相较于传统数值方法,该半数值方法用方程直接表达部分参数与剪弯刚度关系,并可以高效地分析限弯器剪弯刚度,使设计工作更加高效。     

Enhanced Multi-Layer Fatigue-Analysis Approach for Unbonded Flexible Risers

This paper proposes an enhanced approach for evaluating the fatigue life of each metallic layer of unbonded flexible risers. Owing to the complex structure of unbonded flexible risers and the nonlinearity of the system, particularly in the critical touchdown zone, the traditional method is insufficient for accurately evaluating the fatigue life of these risers. The main challenge lies in the transposition from global to local analyses, which is a key stage for the fatigue analysis of flexible pipes owing to their complex structure. The new enhanced approach derives a multi-layer stress-decomposition method to meet this challenge. In this study, a numerical model validated experimentally is used to demonstrate the accuracy of the stress-decomposition method. And a numerical case is studied to validate the proposed approach. The results demonstrate that the multi-layer stress-decomposition method is accurate, and the fatigue lives of the metallic layers predicted by the enhanced multi-layer analysis approach are rational. The proposed fatigue-analysis approach provides a practical and reasonable method for predicting fatigue life in the design of unbonded flexible risers.     

海洋传感观测服务柔性开发技术研究

海洋传感观测服务能够实现多个海洋观测系统间的数据共享与集成,支持大范围、多学科的海洋科学研究。在软件开发过程中,由于不同观测系统的数据库异构互异,导致传感器观测服务软件难以复用,开发效率低。本文针对数据库结构的相似性进行分析,提出海洋传感观测服务的柔性开发模型,设计可适配于异构数据库的服务构件。该构件通过配置观测数据在具体数据库的存储结构,实现了数据库结构向服务模式定义的映射;服务构件根据配置信息生成数据库查询语句,实现观测数据的自动提取,避免了数据库异构导致的重复开发的问题。通过将服务构件应用在实际开发中,验证了该模型的有效性与可行性。     

血管介入手术中的柔性虚拟力触觉系统研究

随着微创手术的发展,虚拟手术的应用前景越来越广阔.力反馈作为虚拟手术的核心技术,其实现的效果直接影响了虚拟手术的沉浸感.通过对经典包围盒碰撞检测算法进行研究比对,选择了球包围盒的碰撞检测算法,并建立了精确的反馈力计算模型,实现了介入血管中的柔性碰撞仿真.该仿真具有很高的实时性和精度.