滚 滑 复 合 轴 承 研 究

针对牙轮钻头的滑动轴承和滚动轴承在实际工作中所存在的问题，提出一种牙轮钻头滚滑复合轴承，对滚滑复合轴承结构进行有限元对比分析、模拟对比试验和钻头现场验证实验，表明滚滑复合轴承是一种较先进的创新性轴承。     

鞍山市西郊区水位预测

根据鞍山市西郊区水文地质条件，建立了双层渗流二维平面系统的数学模型：应用Galerkin有限元法求解模型，从模型的计算结果可见该区观测点水位绝对误差较小，达到了规范要求的计算精度，同时，在此区内有一个大漏斗，在东南的铁西一带也有一个小漏斗。由于铁西一带是主要开采水源区，开采水量较大，所以漏斗逐渐向外扩大且水位有明显下降的趋势。这一变化规律与实际水位一致，说明计算水位基本上反映了实际水位空间变化的规律。因此根据模拟参数利用此模型对该地区进行了水位预测，共预测了四年的水位状况，并依据水位的预测结果对该区的水资源开发利用提出了合理建议。     

考虑几何非线性的强夯流固动力耦合分析

针对强夯法加固地基机理的流固动力耦合分析问题,本文考虑土体的几何非线性,建立土体非线性动力平衡方程和整体流固动力耦合方程,给出土体非线性动力平衡方程的迭代计算格式和流固动力耦合方程的解耦计算方法,并对一具体算例进行了数值分析,得到了地基位移、应力等在强夯作用下的变化规律和在空间上的分布特征,为精确模拟分析强夯加固机理提供了有效途径。     

浅水方程数值计算方法的研究

求解以水位为变量的连续方程,并根据Navier-Stokes方程压力修正算法的基本思想,建立了浅水方程的水位修正算法,放宽了对离散时间步长的限制.通过对离散方程系数矩阵的重新构造,建立了高分辨率有限元格式,该格式既具有较高的离散精度又避免了数值解的伪振荡.对动量方程的阻力项做负坡线性化处理,提高了露滩计算的稳定性.数值模拟结果与解析解吻合良好,表明所建立的数值计算方法是正确的和可靠的.     

HHT方法在地震工程中的应用之初步探讨

详细介绍了一种新的非线性、非平稳信号的处理方法-HHT，讨论了其有效性和优越性，简单介绍了其在地震工程中的应用前景，并利用HHT处理了地震工程中常用El Centro地震记录，得到了该记录的振幅-频率-时间分布特性，并将得到的边际谱与傅立叶谱做了对比。     

Estimation of fundamental periods of shear‐wall dominant building structures

Shear‐wall dominant multistorey reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code (International Conference of Building Officials, Whittier, CA, 1997) and the Turkish Seismic Code (Specification for Structures to be Built in Disaster Areas, Ankara, Turkey, 1998) present limited information for their design criteria. In this study, consistency of equations in those seismic codes related to their dynamic properties are investigated and it is observed that the given empirical equations for prediction of fundamental periods of this specific type of structures yield inaccurate results. For that reason, a total of 80 different building configurations were analysed by using three‐dimensional finite‐element modelling and a set of new empirical equations was proposed. The results of the analyses demonstrate that given formulas including new parameters provide accurate predictions for the broad range of different architectural configurations, roof heights and shear‐wall distributions, and may be used as an efficient tool for the implicit design of these structures. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluating foundation mass,damping and stiffness by the least‐squares method

This paper discusses how to use the three‐dimensional (3D) time‐domain finite‐element method incorporating the least‐squares method to calculate the equivalent foundation mass, damping and stiffness matrices. Numerical simulations indicate that the accuracy of these equivalent matrices is acceptable when the applied harmonic force of 1+sine is used. Moreover, the accuracy of the least‐squares method using the 1+sine force is not sensitive to the first time step for inclusion of data. Since the finite‐element method can model problems flexibly, the equivalent mass, damping and stiffness matrices of very complicated soil profiles and foundations can be established without difficulty using this least‐squares method. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

观测有效性的度量方法

基于Hilbert空间理论 ,通过对观测方程的系数阵实施格拉姆_施密特 (Gram_Schmidt,G_S)正交化过程 ,分析观测的两个特性 ,从一个新的角度论证了参数估计的必要观测问题 ,以及多余观测与必要观测的关系 ;用欧氏范数‖·‖2 和Frobenius‖·‖ F 范数作为基本度量工具对观测提供参数估计的信息量进行度量分析 ,研究观测的有效性和参数估计的可靠性。采用观测空间分析方法研究了测绘学科中必要观测、多余观测等基本概念 ;提出了观测信息量、观测有效性的概念和相应的度量方法 ;从观测的空间结构出发分析参数估计系统的可靠性 ,从一个侧面扩展和丰富了测绘学中的可靠性理论 ;丰富了研究测绘学中一些基本问题的分析方法 ,也为信息学中的数据挖掘问题提供了一种分析思路