Analysis of wave groups by wave envelope-phase and the Hilbert Huang transform methods

The wave groups are studied by both conventional wave analysis methods and by the non-stationary Hilbert Huang Transform (HHT) method. Full-scale wave records containing abnormal waves are used. Instantaneous quantities, such as envelope, phase and frequency, are adopted to study the wave grouping. A refined definition of wave group is proposed considering that the wave process is simultaneously amplitude and frequency modulated. The validation of the proposed definition is conducted by analysis of numerical simulation data. Group parameters are proposed based on the time-frequency distribution of energy. An attempt is made to find the relationship between the characteristics of abnormal waves and the group characteristics.     

脐带缆在潜器下放过程中的运动建模与仿真

潜器在下放布置过程中需要考虑变长度的脐带缆对其运动的影响,在考虑流的情况下,对脐带缆的有限差分模型进行了改进,并采用最小二乘方法求解由时间和空间上的中心差分格式离散后的非线性方程组。为了验证模型改进的有效性,将潜器在均匀定常流中水平匀速直航时的数值解与该特殊情况下的解析解进行比较,两组解的吻合不仅证实了模型改进的有效性,而且表明上述数值计算方法是可靠且有效的。在潜器下放布置运动给定的情况下,脐带缆的运动仿真结果表明,潜器姿态角的调整会对拖曳点处的缆绳张力大小和变化趋势产生显著的影响,流在改变缆绳空间形状的同时引起了缆绳对潜器作用力和力矩的非线性和时变性,脐带缆总是阻止潜器自身动力对运动速度和姿态角的改变,且对纵荡运动的影响最大。     

The Effect of Concrete Deformation on Displacement of an Axially Loaded Drilled Shaft

This article presents the settlement of drilled shafts resulting from their structural deformations. Although drilled shafts are widely used as foundations for settlement-sensitive structures such as bridges and high-rise buildings, the structural deformations of drilled shafts are not typically taken into account in the design process. However, if unexpected structural deformations of drilled shafts cause additional settlement to the foundation, the serviceability of the superstructure can be jeopardized. Unfortunately, very few research efforts have been made to quantify the structural deformation of drilled shafts; this needs to be addressed to accurately predict the settlement of drilled shafts. In this study, we investigate the effect of structural deformation on displacement of axially loaded drilled shafts. Finite element analyses were performed to quantify the structural deformation of drilled shafts. The analysis results indicated that the structural deformation of drilled shafts could be quite significant for long drilled shafts. The main factors that affected the structural deformation of drilled shafts were found to be pile length, the material properties of drilled shafts, and the relative humidity of surrounding soil. An approximate equation is proposed to estimate the long-term deformation of drilled shafts.     

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.     

页岩压裂影响因素三维模型数值分析

不同影响因素对页岩水力压裂效果有不同的影响。基于三维数值计算模型介绍了水力压裂的典型过程,针对水平最小主应力、页岩的弹性模量和渗透系数对压裂的影响进行了分析。结果表明:随着水平最小主应力的增加,裂缝高度也随之增加;随着页岩的弹性模量增加,裂缝的高度随之降低;随着渗透系数的增加,裂缝高度也随之增加;随着压裂液的黏度系数提高,裂缝的高度降低。     

Super-resolution enhancement of UAV images based on fractional calculus and POCS

Abstract

A super-resolution enhancement algorithm was proposed based on the combination of fractional calculus and Projection onto Convex Sets (POCS) for unmanned aerial vehicles (UAVs) images. The representative problems of UAV images including motion blur, fisheye effect distortion, overexposed, and so on can be improved by the proposed algorithm. The fractional calculus operator is used to enhance the high-resolution and low-resolution reference frames for POCS. The affine transformation parameters between low-resolution images and reference frame are calculated by Scale Invariant Feature Transform (SIFT) for matching. The point spread function of POCS is simulated by a fractional integral filter instead of Gaussian filter for more clarity of texture and detail. The objective indices and subjective effect are compared between the proposed and other methods. The experimental results indicate that the proposed method outperforms other algorithms in most cases, especially in the structure and detail clarity of the reconstructed images.     

Kelvin-Voigt黏弹性介质井孔声场有限差分数值模拟与波形特征

岩石介质具有黏滞性,黏弹性介质模型相对于弹性介质模型更为接近岩石介质的真实情况。根据Kelvin-Voigt黏弹性单元体模型本构关系,推导了柱坐标系下各向同性黏弹性介质时间域交错网格有限差分方程,进行了黏弹性介质井孔声场的数值模拟。模拟结果表明：品质因子和声源中心频率对黏弹性介质中的井内外声场均有影响：井外声场和井内声场的衰减均随品质因子的增大而减小,井外声波和井内反射波振幅随之增大;井外声场的衰减随声源中心频率的增大而减小,井外声波振幅随之增大,井内声场的衰减随声源中心频率的增大而增大,井内反射波振幅随之减小。     

工程结构三维疲劳裂纹最大应力强度因子计算

介绍了裂纹的类型、裂纹尖端应力场的奇异性。以一维问题为例,推导论证了奇异单元能够很好的反映裂纹尖端应力场的奇异性。应力强度因子一般表达式表明应力强度因子与载荷呈线性关系,并依赖于物体和裂纹的几何形状和尺寸。本文借助大型通用有限元软件ANSYS,采用位移外插法计算了三维表面裂纹前沿不同位置处的应力强度因子,并与《应力强度因子手册》基于实验的理论公式计算结果相比较。结果表明:有限元结果与理论解误差较小,裂纹最深处应力强度因子最大。     

振动测量用叉指式硅微加速度计性能研究

硅MEMS加速度仪可以用于地震以及各种工程振动的测量,目前其精度较低,温度灵敏度较高,为了掌握MEMS加速度计的特性,提高其实用性能,本文介绍了一种叉指式硅微机械加速度计(FMSA)表头微结构和系统的工作原理,推导了微结构梁的刚度,利用ANSYS有限元软件分析了FM-SA加速度计的静态特性、动态特性和温度特性,验证了推导的正确性,说明微结构参数是决定FMSA加速度计性能的主要因素,为改进加速度计性能提供了依据,并对其在振动观测领域实际应用提供了理论指导。     

Time domain method for calculating free field motion of a layered half-space subjected to obliquely incident body waves

In numerical simulation of wave scattering under oblique incident body waves using the finite element method, the free field motion at the incident lateral boundary induced by the background layered half-space complicates the computational area. In order to replace the complex frequency domain method, a time-domain method to calculate the free field motion of a layered half-space subjected to oblique incident body waves is developed in this paper. The new method decouples the equations of motion used in the finite element method and offers an interpolation formula of the free field motion. This formula is based on the fact that the apparent horizontal velocity of the free field motion is constant and can be calculated exactly. Both the theoretical analysis and numerical results demonstrate that the proposed method offers a high degree of accuracy.