Regional Stress Field and Seismic Dynamics Along the Border Zone Between Fujian, Guangdong and Jiangxi Provinces

The regional stress field and seismic dynamics along the border zone between Fujian, Guangdong and Jiangxi Provinces are studied based on the seismo-geological data, GPS measurement, and seismicity. The results show that: (1) the principal compressional stress of the stress field is oriented in NW-SE direction and the principal extensional stress is in NE-SW direction; (2) the WNW-ward compression and collision of the Philippine Sea Plate to the eastern coast of Taiwan Island are the most direct and most important dynamic source for preparation and occurrence of strong earthquakes in the Taiwan area and along the border zone between Fujian, Guangdong and Jiangxi Provinces.     

Characteristics of Tectonic Deformation and Mechanisms for the Active Maxianshan-Xinglongshan Fault System in the Lanzhou Area

A detailed investigation permitted us to obtain quantitative data concerning fine geometric structures of 4 faults of the active Maxianshan-Xinglongshan fault system and the latest movement along them. Of them the northern Maxianshan border fault is a large-scale, strongly active Holocene reverse sinistral strike-slip fault, the other 3 faults, the southern Maxianshan border fault and the southern Xinglongshan border and the northern Xinglongshan border faults are the accompanying active late-Pleistocene thrust faults, which are incorporated into the main strike-slip fault, the northern Maxianshan border fault at depth. It is the most important earthquake-controlling fault in the Lanzhou area, the fault influences and constrains the seismic activity in the area.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

Identification of soil degradation during earthquake excitations by Bayesian inference

A Bayesian inference approach is introduced to identify soil degradation behaviours at four downhole array sites. The approach of inference is based on a parametric time‐varying infinite impulse response filter model. The approach is shown to be adaptive to the changes of filter parameters and noise amplitudes. Four sites, including the Lotung (Taiwan), Chiba (Japan), Garner Valley (California), and Treasure Island (California) sites with downhole seismic arrays are analysed. Our results show two major types of soil degradation behaviour: the well‐known strain‐dependent softening, and reduction in stiffness that is not instantaneously recoverable. It is also found that both types of soil degradation are more pronounced in sandy soils than in clayey soils. The mechanism for the second type of soil degradation is not yet clear to the authors and suggested to be further studied. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of instrumented bridge systems

Several recorded motions for seven bridge systems in California during recent earthquakes were analysed using parametric and non‐parametric system identification (SI) methods. The bridges were selected considering the availability of an adequate array of accelerometers and accounting for different structural systems, materials, geometry and soil types. The results of the application of SI methods included identification of modal frequencies and damping ratios. Excellent fits of the recorded motion in the time domain were obtained using parametric methods. The multi‐input/single‐output SI method was a suitable approach considering the instrumentation layout for these bridges. Use of the constructed linear filters for prediction purposes was also demonstrated for three bridge systems. Reasonable prediction results were obtained considering the various limitations of the procedure. Finally, the study was concluded by identifying the change of the modal frequencies and damping of a particular bridge system in time using recursive filters. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

青藏铁路管道通风试验路基地温变化及热状况分析

基于青藏铁路北麓河试验段管道通风路基在2个冻融循环周期内的地温监测资料，分析了路基温度的发展、温度场分布特征及多年冻土的热流量变化．结果表明：通风管埋设于路堤中部的路基温度变化和发展情况与一般路基类似，路基在施工后的2个冻融周期内仍处于整体升温的过程；通风管埋设于路堤下部的路基，虽然前2个冻融循环周期内土体温度与原始状态相比同样有所升高，但开始出现逐渐降低的趋势，同时地温场的分布在横向上的对称性也比较好，在热交换方面，一般填土路基和通风管位于路堤中部的路基在施工后的前2个冻融循环周期内一直处于吸热过程，而通风管位于路堤下部的路基在经历了第1个周期的持续吸热过程后，在第2个冻融循环周期内已经开始放热。     

哈尔滨市磨盘山水利枢纽区三维渗流数值模拟模型研究

哈尔滨市磨盘山水库防渗型式拟采用垂直砼防渗墙及帷幕灌浆方案。为了分析左岸不同长度防渗对水库渗漏量及坝基渗透稳定性的影响。对磨盘山水利枢纽区渗流场进行了三维数值模拟研究。结果表明，随着左岸防渗长度的增大。渗漏量及下游渗流出口渗透比降基本呈线性趋势减小。当左岸防渗长度为200m时。渗漏量及各渗透比降均小于允许值，为推荐的渗控方案。     

冲绳海槽南部沉积层序的粒度特征

对取自冲绳海槽南部的A2 3孔经前处理后的沉积物样品进行了粒度测试,探讨了陆源沉积层序的粒度特征。沉积物平均粒径、分选系数、偏态、峰态等粒度参数的变化显示出A2 3孔的沉积层序以 4 0 0cm为界可分为上、下两段,下段各参数稳定,代表了比较稳定的水动力条件的沉积环境;上段则波动较大,小规模浊流沉积频繁发育,暗示了不稳定的沉积环境。浊流层内粗粒与细粒组分含量及粒度分布的变化具有明显的规律性。通过分析A2 3孔陆源沉积层序的各沉积参数特征,认为冲绳海槽南部的沉积环境和动力在时间尺度上有较大的变化,东海陆架物质向南部海槽的输运可能是以峡谷为通道的重力作用引起的床底沉积作用为主。另外,对陆源碎屑和全样粒度结果的对比,显示了前处理方法对于海洋沉积物粒度分析的重要性.