The biaxial compression mechanical properties of crushed rock

Crushed rock subgrade, as one of the roadbed-cooling methods, has been widely used in the Qinghai-Tibet Railway. Much attention has been paid on the cooling effect of crushed rock; however, the mechanical properties of crushed rock are somehow neglected. Based on the discrete element method, biaxial compression test condition for crushed rock is compiled in FISH language in PFC^2D, and the natural shape of crushed rock is simulated with super particle "cluster". The effect of particle size, crushed rock strength and confining pressure level on overall mechanical properties of the crushed rock aggregate are respectively analyzed. Results show that crushed rock of large particle size plays an essential framework role, which is mainly responsible for the deformation of crushed rock aggregate. The strength of gravel has a great influence on overall mechanical properties which means that strength attenuation caused by the freeze thaw cycles cannot be ignored. The stress-strain curves can be divided into two stages including shear contraction and shear expansion at different confining pressures.     

南海高钙沉积物中18种常微量元素的ICP-AES测定方法研究

在利用ICP-AES分析南海高钙沉积物中的常微量元素时,钙、镁常常干扰其它元素测试。通过采用优化仪器工作参数、扣除背景值、谱线干扰校正和基体匹配的步骤,消除了元素干扰和钙、镁基体效应,提高了方法的灵敏度和准确度。通过对南海沉积物样品的大量实验和国家一级标准样验证,建立了适宜高钙海洋沉积物元素含量的ICP-AES测试方法。该方法检出限为1.55~271μg/L,相对标准偏差RSD<4.54%(n=6)。     

复合加载条件下吸力式沉箱基础承载特性数值分析

吸力式沉箱基础的承载特性是海洋工程结构设施建造与设计中的一个关键问题。这种新型的深水海洋基础型式,通常承受竖向上拔荷载与水平荷载的共同作用,其工作性能与设计理论远远不能满足工程实践的需要。本文采用有限元分析方法对吸力式沉箱基础的极限承载特性进行数值计算。以大型通用有限元分析软件ABAQUS为平台,通过二次开发,数值实现了Swipe试验加载方法和固定位移比分析方法,针对不同的沉箱长径比、土的强度折减系数,探讨了沉箱基础在垂直上拔荷载和水平荷载单调联合作用下的极限承载力,通过对不同荷载组合的数值计算构造了复合加载条件下沉箱基础破坏包络面。     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.     

东海三定点周日海流观测的准调和分析

应用短期资料的潮流准调和分析方法,对东海三定点测站获得的表、中、底3层的25h连续海流资料进行了分析,计算了3测站O1,K1,M2,S2,M4,MS4 6个主要分潮的北、东分量潮流调和常数,并给出了各测站在各层的潮流椭圆要素。计算结果表明：该海区潮流属于正规半日潮流性质,半日分潮流的北分量大于东分量,呈现旋转流的性质,按顺时针向旋转。分析结果也反映出表层、中层的浅水分潮在观测海流中所占的份额高于底层的浅水分潮。结果有助于了解该海区的潮流性质并为潮流数值模拟提供校验实测数据。通过与同期获得的悬浮物浓度剖面数据的比对,将有助于研究潮流与该地区悬浮泥沙浓度分布之间的关系。     

预修正快速傅里叶变换高阶边界元方法在波浪对物体作用问题中的应用

边界元方法被广泛应用于波浪对海上婕筑物作用领域,但由于传统边界元方法的存储量和计算量均为未知量的平方量级,很难满足大范围多未知量问题的计算需要.本文基于高阶边界元方法,应用预修正快速傅里叶变换方法,使计算量与存储量分别降低至O(NlogN)和O(N)量级,并得到一个连续的压强分布以适应结构设计的要求,同时可以通过使用满...     

Application of a BEM time stepping algorithm in understanding complex unsteady propulsion hydrodynamic phenomena

We solve the problem of unsteady potential flow around a system of arbitrarily moving rigid or flexible, lifting or non-lifting bodies, in an infinite fluid free of distributed vorticity. For the solution we use a time stepping algorithm and a potential based formulation of the corresponding free BVP. Nonlinear free shear layer dynamics are included in our modeling. This is a major innovation in treating complex unsteady propulsion problems since no simplifying assumptions (like that of a helicoidal wake) are used regarding the wake model. Bilinear quadrilateral elements are used to describe body and shear layer geometry at each time t. Three types of Kutta conditions can be alternatively applied for the determination of the shed vorticity from lifting bodies. The theoretical and numerical aspects of the method are presented followed by a number of applications, elucidating the qualitative and quantitative physical characteristics of a number of complex unsteady propulsion problems.     

Study on scattering wave force of horizontal and vertical plate type breakwaters

The interaction between wave and horizontal and vertical plates is investigated by the boundary element method,and the relations of wave exciting force with plate thickness,submergence and length are obtained.It is found that:1) The efficient wave exciting force exists while plate submergence is less than 0.5 m,and the plate is very thin with order O(0.005 m).2) The maximum heave wave exciting force exists,and it is the main factor for surface and submerged horizontal plate while the roll force can be ignored.3) The maximum sway wave exciting force exists,it is the main factor for surface or submerged vertical plate,and the roll force is about 20 times of horizontal plate.     

长江口南支沉积物元素地球化学分区与环境指示意义

对采自长江口南支的130个表层底质沉积物样品采用X射线荧光光谱法进行了20种常、微量元素的地球化学分析。在此基础上,应用系统聚类法对该区域进行了元素地球化学分区。研究结果表明,研究区主要可以分为两大地球化学分区:Ⅰ区以相对富集SiO2,Sr,Zr元素为典型特征,主要涵盖5 m等深线以浅的长江三角洲前缘区;Ⅱ区以相对富集Al2O3,TFe2O3(全铁),MgO,Pb元素为典型特征,涵盖了前三角洲的广大区域。从地球化学分区的空间分布来分析,这两个分区元素之间的差异反映的是沉积水动力条件与沉积介质物化性质这两个环境要素空间分布的差异性,即在研究区内,表层沉积物元素地球化学空间分布的差异性实质上反映了沉积环境空间分布的差异性。     

标志沉积层磁组构特征及其古环境意义研究

通过对长江三角洲及其邻近区域埋藏古土壤、潮坪、长江下游河道浸滩、舟山滨岸风成沙丘、南京黄土古土壤序列沉积体的磁组构测量统计分析，取得了各自的标志特征。该２特征揭示出，舟山滨岸风成沙丘与南京黄土吉土壤序列沉积的搬运介质能量位相基本一致，其物源来向却显示出巨大差异；上述两类沉积体与上述现今潮坪、河道漫滩沉积体地搬运介质能量位相及物源来向均显示出绝然不同的标志特征。然而浸滩物源来民南京黄土的物尖兵为向却