用于断层测量的温度补偿光纤外腔型法布里-珀罗位移传感器

针对光纤EFPI传感器通常尺寸很小,而断层尺寸相对较大,导致光纤EFPI传感器在待测断层处安装不便的情况,提出了一种可用于断层测量的光纤外腔型法布里-珀罗位移传感器.两根陶瓷插芯从陶瓷套管的两端插入构成EFPI结构,通过使用金属内管和金属外管,增大了光纤EFPI位移传感器的尺寸;并且金属外管的两端采用O型圈密封,因此该EFPI位移传感器能够防水防尘.为了消除温度对EFPI位移传感器的影响,两根金属内管采用了不同热膨胀系数的材料在结构上进行温度补偿.在温度连续变化的环境下,对腔长为718.39 m的EFPI位移传感器进行了测量.测量结果显示,经过温度补偿设计后,位移传感器的温度系数由0.14 μm/℃下降到了-0.04 μm/℃,并呈现过补偿.     

THE LATE QUATERNARY RIGHT LATERAL STRIKE-SLIPPING OF ZHONGDIAN—DAJU FAULT IN NORTHWEST YUNNAN, CHINA

THE LATE QUATERNARY RIGHT LATERAL STRIKE-SLIPPING OF ZHONGDIAN—DAJU FAULT IN NORTHWEST YUNNAN, CHINAthesubject“TherecentdisplacementandDynamicsoflithosphereintheQinghai XizangPlateau”ofnation alclimbingproject“Therecentdisp     

Tracking of facial deformations in multi-image sequences with elimination of rigid motion of the head

The paper deals with measurement of human facial deformations from synchronized image sequences taken with multiple calibrated cameras from different viewpoints. SIFT (Scale Invariant Feature Transform) keypoints are utilized as image feature points in the first place to determine spatial and temporal correspondences between images. If no temporal match is found for an image point by keypoint matching, then the tracking of the point is switched to least squares matching provided the point has one or more spatial corresponding points in the other views of the previous frame. For this purpose, a new method based on affine multi-image least squares matching is proposed where multiple spatial and temporal template images are simultaneously matched against each search image and part of the spatial template images also change during adjustment. A new method based on analyzing temporal changes in the image coordinates of the tracked points in multiple views is then presented for detecting the 3-D points which move only rigidly between consecutive frames. These points are used to eliminate the effect of rigid motion of the head and to obtain the changes in the 3-D points and in the corresponding image points due to pure deformation of the face. The methods are thoroughly tested with three multi-image sequences of four cameras including also quite large changes of facial deformations. The test results prove that the proposed affine multi-image least squares matching yields better results than another method using only fixed templates of the previous frame. The elimination of the effect of rigid motion works well and the points where the face is deforming can be correctly detected and the true deformation estimated. A method based on a novel adaptive threshold is also proposed for automated extraction and tracking of circular targets on a moving calibration object.     

西昆仑接收函数反演与构造解析

中法合作布设的青藏高原西昆仑叶城-噶尔(狮泉河)天然地震探测剖面穿越了西昆仑构造的主要构造单元, 通过对36个台站128个远震P波事件的接收函数分析,取得了各台站的接收函数随方位角和震中距变化的趋势, 分析了变化趋势与地壳构造的关系。通过台站平均接收函数的反演拟合,取得了120km深度范围以上的横波速度分布,综合地质构造解释,发现康西瓦断裂地表倾斜渐变为直立并略向南拖曳的现象,塔里木前陆盆地沉积与逆冲构造有比较明显的显示,同时推测了盆地下的滑脱构造。班公湖-怒江断裂也有向北俯冲的显示,得出了印藏碰撞远距离效应在西昆仑受阻,应力通过地表次级断裂释放,同时形成盆地沉积的前陆构造模式。     

大别山北麓佛子岭群的特征及其形成的大地构造环境

佛子岭群主要由一套绿片岩相的变质岩组成,分布在安徽境内的大别山北麓。其上部为一套变质的复理石建造,下部为变质的火山-沉积岩建造。佛子岭群的变质火山岩的岩石化学特征及佛子岭群的岩石组合特征表明,佛子岭群是发育在一断陷盆地中,该断陷盆地可能在晚元古代早期开始拉张,在晚元古代末期闭合。在此期间,郯-庐断裂带在华北断块和大别山古老断块之间的拉张与闭合过程中可能起着类似于转换断层的作用。     

Formation and shortening deformation of a back-arc rift basin revealed by deep seismic profiling, central Japan

The northern Fossa Magna (NFM) basin is a Miocene rift system produced in the final stages of the opening of the Sea of Japan. It divides the major structure of Japan into two regions, with north-trending geological structures to the NE of the basin and EW trending structures to the west of the basin. The Itoigawa-Shizuoka Tectonic Line (ISTL) bounds the western part of the northern Fossa Magna and forms an active fault system that displays one of the largest slip rates (4–9 mm/year) in the Japanese islands. Deep seismic reflection and refraction/wide-angle reflection profiling were undertaken in 2002 across the northern part of ISTL in order to delineate structures in the crust, and the deep geometry of the active fault systems. The seismic images are interpreted based on the pattern of reflectors, the surface geology and velocities derived from refraction analysis. The 68-km-long seismic section suggests that the Miocene NFM basin was formed by an east dipping normal fault with a shallow flat segment to 6 km depth and a deeper ramp penetrating to 15 km depth. This low-angle normal fault originated as a comparatively shallow brittle/ductile detachment in a high thermal regime present in the Miocene. The NFM basin was filled by a thick (>6 km) accumulation of sediments. Shortening since the late Neogene is accommodated along NS to NE–SE trending thrust faults that previously accommodated extension and produce fault-related folds on their hanging wall. Based on our balanced geologic cross-section, the total amount of Miocene extension is ca. 42 km and the total amount of late Neogene to Quaternary shortening is ca. 23 km.     

红河断裂北段土壤中断层气含量变化特征

介绍了作者在滇西地震预报实验场区进行的土壤中断层气研究结果．沿红河断裂带断层气组分Ｈ２,ＣＯ２,Ｈｇ和Ｒｎ含量很高．沿该断裂洱源测线断层气Ｈ２,ＣＯ２和Ｒｎ含量最低,向南Ｈ２,ＣＯ２含量逐渐升高,其中以定西岭测线的Ｈ２,ＣＯ２含量最高．表明在该段断裂活动强烈,而洱源一带断裂活动较弱．     

安宁河-则木河断裂带及周边地区Rayleigh波群速度背景噪声成像研究

安宁河-则木河断裂带位于川滇地块、巴颜喀拉地块和华南地块的交接部位,是川滇菱形块体的东部重要边界。利用布设在安宁河-则木河断裂带周边区域的西昌台阵和川西台阵均历时两年、共187个宽频带地震台站的垂直分量的背景噪声数据,采用噪声层析成像方法获得了这一区域4~20s的Rayleigh波群速度分布图像。与前人研究相比,本文结果的横向分辨率有明显改进,在安宁河-则木河断裂带可达20km左右,在其它区域可以达到20~40km。成像结果表明,安宁河-则木河断裂地区上地壳的速度结构存在明显横向不均匀性,速度分布特征与地表地质构造基本一致,不同周期的速度分布变化较小。盐源盆地、西昌盆地和四川盆地西南缘表现为低速异常。九龙附近和南部的德昌-盐边-巧家附近表现为高速异常,分别与出露的花岗岩体和峨眉山玄武岩有关。在安宁河断裂南段和则木河断裂北段能观测到断裂两侧的速度存在明显差异,其余断裂带两侧的速度对比不明显。贡嘎山附近的中上地壳表现为明显的低速异常,其东侧和西南侧高速体的阻挡,以及鲜水河-安宁河断裂带走向的变化,在贡嘎山区形成一个挤压弯曲段,使得川滇菱形块体的东南向水平运动转换为垂直于断裂的挤压作用和垂直隆升,导致了贡嘎山的快速隆起。     

青藏高原东南缘地貌边界性质的界定及其对高原东南缘扩展模式的启示

青藏高原东南部的地貌结构是高原隆升深部动力过程与高原扩展的重要指标之一,存在受下地壳流驱动的渐变模型和受宽约50～200km的雅砻-玉龙断裂系控制的陡变模型2种不同认识。文中基于30m分辨率的SRTM数据进行数字高程分析,利用高程和水系参数对研究区地貌加以提取和分析,结合野外地貌和构造调研的结果以及前人的相关研究,对高原东南缘川滇地块中部构造地貌细结构进行了详细的解析。研究认为,青藏高原东南边界具有明显的台阶式构造地貌结构,不同台阶梯度带受不同时期发育的NE-SW向断裂控制。其中一级边界位于木里-玉龙断裂,控制了平均海拔4 200m的高原面的东南边界,是渐新世—中新世早期构造抬升的结果;二级边界受中新世中期逆冲活动的金河-箐河断裂控制,其构成丽江—盐源一带海拔中等(约3 000m)、相对低起伏区域的东南边界。高原东南边界的台阶式构造地貌结构反映了高原向SE的前展式逆冲扩展。这种扩展模式并不支持下地壳管道流连续变形模型。