地下圆形衬砌隧道对沿线地震动的影响(II):数值结果

利用地下圆形衬砌隧道对入射平面P波和SV波散射级数解答，定量分析了入射波长、入射角度、隧道直径、衬砌刚度等因素对沿线地表位移放大作用的影响。计算结果表明，当入射频率较低时，地下隧道的存在对地表位移幅值影响不大；而当入射频率较高时，地表位移幅值可以达到无隧道情况的4．5倍以上；衬砌情况下地表位移幅值可以高出非衬砌情况的87．8％。建议在地铁的规划设计中考虑地下隧道的建设对隧道沿线设计地震动的影响。     

T106产品中700hPa垂直速度和水汽能量与塔城大降水关系的探讨

对塔城盆地1998－1999年15个大降水个例进行了诊断分析，发现了T106产品700hPa垂直速度和水汽通量与塔城盆地大降水量级呈正相关，并给出了定量预报指标。     

东乡铜矿断裂带构造地球化学及找矿标志

东乡铜矿区主要断裂带SiO2明显为带入组分，K^ ,Na^ ,Ca^2 ,Mg^2 属带出组分，Fe^3 /Fe^2 比值相对较低，成矿元素Cu,Pb,Zn,Ag,Au,As,Sb,Mo,Sn含量增高，属于明显的带入组分，可作为储矿断裂的找矿标志。     

大别山晓天—磨子潭断裂带石英脉流体包裹体的特征及其构造意义

晓天—磨子潭断裂流体包裹体的均一温度、盐度和捕俘压力研究结果表明:晓天—磨子潭断裂中石英脉中流体主要来自浅部,有多期次流体包裹体,流体包裹体的均一温度分为三个区间:140～180℃、190～240℃和270～340℃,反映了至少经历了三次强烈的流体活动。流体包裹体的盐度<10%,捕获压力<1.350×108Pa。总体上越靠近晓天—磨子潭断裂,包裹体的均一温度和盐度越高,捕获压力越大,局部地区的差异,能从断裂对流体控制上得到合理的解释;另外,流体包裹体的均一温度、盐度和捕获压力,在不同的显微构造,围岩性质、构造环境和时空范围中,发生不同的变化。一方面多次构造活动和热事件的驱动流体活动,另一方面流体的活动,降低了岩石脆—韧性变形的温压条件,促进了岩石的变形。     

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

张北地震区三维构造特征

地震层析成像结果揭示了张北地震区的构造特征。震源区周围分布有相交的北北西和北东向低速异常带。极震区正下方壳内存在高速异常的坚固体 ,其周围被多条低速异常带围限。区域构造具备了大量积累应变能和向高应力区传递应变能的孕震构造特征 ,北北西和北东向的隐伏断裂共同构成了区域的发震构造。该震区在中新生代以来有过多期岩浆活动 ,震中区周围分布有几个新第三纪的火山口。极震区米家沟附近火山的三维剖分图给出了该火山从地表到壳内 10km深度的速度图像 ,中新生代的火山岩浆活动对该区域孕震构造的形成起了重要作用。     

地下水数值计算中断层处理的"切割-导通法"

从对断层导水性能的分析出发 ,提出了地下水数值计算中断层处理的“切割—导通法” ,既考虑断层侧向导水性 ,又考虑了其垂向导水性 ,更符合断层导水的实际情况 ,也易于描述较大断裂在走向上的导水性差异。     

The Mw = 6.0, 7 September 1999 Athens Earthquake

On 7 September 1999 at 11:56 GMT a destructive earthquake (M_w = 6.0) occurred close to Athens (Greece). The rupture process is examined using data from the Cornet local permanent network, as well as teleseismic recordings. Data recorded by a temporary seismological network were analyzed to study the aftershock sequence. The mainshock was relocated at 38.105°N, 23.565°E, about 20 km northwest of Athens. Four foreshocks were also relocated close to the mainshock. The modeling of teleseismic P and SH waves provides a well-constrained focal mechanism of the mainshock (strike = 105°, dip = 55° and rake = -80°) at a depth of 8 km and a seismic moment M₀ = 1.010²⁵ dyn·cm. The obtained fault plane solution represents normal faulting indicating an almost north-south extension. More than 3500 aftershocks were located, 1813 of which present RMS < 0.1 s and ERH, ERZ < 1.0 km. Two main clusters were distinguished, while the depth distribution is concentrated between 2 and 11 km. Over 1000 fault plane solutions of aftershocks were constrained, the majority of which also correspond to N–S extension. No surface breaks were observed but the fault plane solution of the mainshock is in agreement with the tectonics of the area and with the focal mechanisms obtained by aftershocks. The hypocenter of the mainshock is located on the deep western edge of the fault plane. The relocated epicenter coincides with the fringe that represents the highest deformation observed on the differential interferometric image. The calculated source duration is 5 sec, while the estimated dimensions of the fault are 15 km length and 10 km width. The source process is characterized by unilateral eastward rupture propagation, towards the city of Athens. An evident stop phase observed in the recordings of the Cornet local stations is interpreted as a barrier caused by the Aegaleo Mountain.     

Origin of Gold—Bearing Fluid and Its Initiative Localization Mechanism in Xiadian Gold Deposit,Shandong Province

The composition of quartz inclusions and trace elements in ore indicate that gold-bearing fluid in the Xiadian gold deposit,Shandong Province,stemmed from both mantle and magma,belonging to a composite origin.Based on theoretical analysis and high temperature and high pressure experimental studies,gold-bearing fluid initiative localization mechanism and the forming environment of ore-host rocks are discussed in the present paper.The composite fluid extracted gold from rocks because of its expanding and injecting forces and injecting forces and flew through ore-conducive structures,leading to the breakup of rocks.The generation of ore-host faults and the precipitation of gold-bearing fluid occurred almost simultaneously.This study provides fur-ther information about the relationships between gold ore veins and basic-ultrabasic vein rocks and intermediate vein rocks,the spatial distribution of gold ore veins and the rules governing the migration of ore fluids.     

The Vigny limestones: a record of Palaeocene (Danian) tectonic-sedimentary events in the Paris Basin

Danian marine sedimentation in the Paris Basin occurred between two major erosional phases. The earlier was responsible for the stripping of presumably deposited Maastrichtian sediments and of a variable thickness of Campanian chalk. The later occurred during the late Palaeocene and resulted in the erosion of almost all Danian deposits, which are now limited to small and scattered outcrops. One of these outcrops corresponds to reefal and peri‐reefal limestones of middle to late Danian age, exposed in the quarries of Vigny (NW of Paris). Danian deposits here show intricate relations with the surrounding Campanian chalk. Danian sedimentation was contemporaneous with faulting, which generated signifiant sea‐floor relief and resulted in contrasting depositional areas: topographic highs with coralgal reefs, and depressions where calcirudite channel fill accumulated. Normal faulting occurred along WNW–ESE master faults. The generation of submarine fault scarps gave rise to various types of gravity‐driven phenomena, including the sliding and slumping of large blocks of reefal limestone and the deposition of carbonate debris flows. Along with the redeposition of the Danian carbonates, flows of fluidized and reworked Campanian chalk resulted from the peculiar physical properties of the undercompacted chalks. Erosion and faulting occurred predominantly during the Palaeocene and represent a major episode in the physiographic evolution of the Paris Basin.