川西北倒三角形断块东部区域强震带形成机制与地震活动特征

川西北倒三角形断块东部区域地处青藏高原东部边缘地带,地跨川西北高原及其与四川盆地过渡带的高山峡谷区,属我国著名的南北向地震带的中段,因其特定的大地构造环境和强烈的现代地壳构造运动,导致其在强大的近东西向构造应力场的驱动和平卧“A”字型控震构造体系的控制下,沿两侧边界断裂向东强力楔入,于“构造急剧收口带”之西侧形成了一个近SN向地跨三大构造单元的强震带,强震沿该带有规律的往返迁移和重复发生,且地震活动强弱具有较明显的分形特征。     

CHARACTERIZATION OF DEFORMATION AND X-RAY PETROFABRICS IN THE MIDDLE PART OF THE WAHONGSHAN FAULT ZONE, QINGHAI PROVINCE, NORTHWESTERN CHINA

The Wahongshan fault zone in Qinghai province is one of the most important faults in westem China. In this paper, deformation and X-ray petrofabrics have been studied in the middle segment of the fault. The results show that the formation of the fault zones can be divided into two major stages: ductile shear deformation stage and brittle deformation stage. The early stage ductile shearing leads to the formation of the NW-NNW trending mylonite zones along the fault, which is intensely cut by the late-formed brittle faults. X-ray petrofabrics of rocks near the faults indicate that the minerals in the tectonites show a great degree of orientation in the alignment. The quartz, which is a very important mineral in the tectonites, is deformed by basal face gliding or near basal face gliding, and sometimes by prismatic face sliding, which indicates that the rocks are deformed in epithermal to mesothermal or mesothermal environment, and the dynamic recrystallization also plays an important role in the formation     

马家沟矿断层赋存规律及其对生产的指导作用

笔 者 结合 工 作 实 践 ,概 述 了 马 家 沟 井 田 范 围 内 断 层 发 育 的 特 点 及 其 基 本 规 律 ;重 点 分 析 了F2断 层 的 赋 存 特征 ,简 要说 明 了根 据断 层赋 存 规律 对生 产 的指 导作 用 。     

钱家营矿首采区断层在剖面上的延伸规律

通 过对 开滦钱 家营 矿首采 区地 质资料 的综 合分析 ,得 出了 该 矿首 采区 断 层在 剖面 上 的变 化特 征 及规 律,并运用这些 规律 ,对未 采区进 行预 测、预报 ,正确 指导了 采掘 工程的 顺利 进行。     

Seismotectonic environment of occurring the February 3, 1996 Lijiang M=7.0 earthquake, Yunnan Province

Lijiang-Daju fault, the seismogenic fault of the 1996 Lijiang M=7.0 earthquake, can be divided into Lijiang-Yuhu segment in the south and Yuhu-Daju segment in the north. The two segments show clear difference in geological tectonics, but have the similar dynamic features. Both normal dip-slip and sinistral strike-slip coexist on the fault plane. This kind of movement started at the beginning of the Quaternary (2.4～2.5 Ma B.P.). As to the tectonic types, the detachment fault with low angle was developed in the Early Pleistocene and the normal fault with high angle only after the Mid-Pleistocene (0.8 Ma B.P.). Based on the horizontal displacements of gullies and the vertical variance of planation surfaces cross the Lijiang-Daju fault at east piedmont of Yulong-Haba range, the average horizontal and vertical slip rates are calculated. They are 0.84 mm/a and 0.70 mm/a since the Quaternary and 1.56 mm/a and 1.69 mm/a since the Mid-Pleistocene. The movements of the nearly N-S-trending Lijiang-Daju fault are controlled not only by the regional stress field, but also by the variant movement between the Yulong-Haba range and Lijiang basin. The two kinds of dynamic processes form the characteristics of seismotectonic environment of occurring the 1996 Lijiang earthquake.     

Geometric form of Haiyuan fault zone in the crustal interior and dynamics implications

The deep seismic reflection data on profile HY2 are reprocessed by the method of simultaneous inversion of velocity distribution and interface position. By the travel-time inversion with the data of the diving wave Pg and fault plane reflection wave, we determine the geometric form and velocity of Haiyuan fault zone interior and surrounding rock down to 10 km depth. The measured data show that the amplitudes have strong attenuation in the range of stake number 37–39 km, suggesting the fault zone has considerable width in the crustal interior. The results of this paper indicate that to the north of the fault zone the crystalline basement interface upheaves gradually from southwest to northeast and becomes shallow gradually towards northeast, and that to the south of the fault zone, within the basin between Xihua and Nanhua mountains, the folded basement becomes shallow gradually towards southwest. The obliquity of the fault zone is about 70° above the 3 km depth, about 60° in the range of the 3–10 km depths. From the results of this paper and other various citations, we believe that Haiyuan fault zone is in steep state from the Earth’s surface to the depth of 10 km. Foundation item: Joint Seismological Science Foundation of China (201001) and State Key Basic Research Development and Programming Project (95-13-02-02). Contribution No. RCEG200308, Exploration Geophysical Center, China Earthquake Administration.     

Similarities between strike-slip faults at different scales and a simple age determining method for active faults

Abstract Several differently scaled strike‐slip faults were examined. The faults shared many geometric features, such as secondary fractures and linkage structures (damage zones). Differences in fault style were not related to specific scale ranges. However, it was recognized that differences in style may occur in different tectonic settings (e.g. dilational/contractional relays or wall/linkage/tip zones), different locations along the master fault or different fault evolution stages. Fractal dimensions were compared for two faults (Gozo and San Andreas), which supports the idea of self‐similarity. Fractal dimensions for traces of faults and fractures of damage zones were higher (D ～1.35) than for the main fault traces (D ～1.005) because of increased complexity due to secondary faults and fractures. Based on the statistical analysis of another fault evolution study, single event movements in earthquake faults typically have a maximum earthquake slip : rupture length ratio of approximately 10^?4, although this has only been established for large earthquake faults because of limited data. Most geological faults have a much higher maximum cumulative displacement : fault length ratio; that is, approximately 10^?2 to 10^?1 (e.g. Gozo, ～10^?2; San Andreas, ～10^?1). The final cumulative displacement on a fault is produced by accumulation of slip along ruptures. Hence, using the available information from earthquake faults, such as earthquake slip, recurrence interval, maximum cumulative displacement and fault length, the approximate age of active faults can be estimated. The lower limit of estimated active fault age is expressed with maximum cumulative displacement, earthquake slip and recurrence interval as T ? (d_max /u) · I(M).     

Seismic reflection imaging of an oceanic detachment fault: Atlantis megamullion (Mid-Atlantic Ridge, 30°10′N)

We present multichannel seismic reflection data collected over the Atlantis megamullion, at the eastern ridge-transform intersection of Atlantis fracture zone on the northern Mid-Atlantic Ridge, and over its conjugate crust. These data image for the first time the internal structure of a young, well-developed megamullion dome formed by tectonic extension across a long-lived oceanic detachment fault. The exposed, corrugated detachment-fault surface exhibits a sharp, coherent reflection that contrasts with less organized reflectivity of surrounding basaltic seafloor. At the termination of the megamullion the fault is imaged ∼13 km along-strike beneath a volcanic hanging-wall block at a sub-seafloor depth of 0.2-0.5 s two-way travel time, reaching north as far as 30°19′N. The eastward dipping of the fault beneath the hanging-wall block is estimated to be ∼6-14°. The corrugated fault surface is underlain by a continuous, strong, and relatively smooth reflection (D) at 0.2-0.25 s sub-bottom below the central axis of the dome. This reflection deepens up to 0.6 s sub-bottom beneath the western slope and it appears to intersect the seafloor on the eastern slope. We suggest that Atlantis massif formed by sequential slip on two different detachment faults that merged at depth, with breakaways as little as ∼2 km apart. The initial detachment is represented by reflection D, and the second corresponds to the presently exposed fault surface. In this interpretation, much of the sliver between the faults is interpreted to be strongly serpentinized peridotite with reduced seismic velocity; it lies in contact with less altered, higher-velocity mantle below the first detachment, resulting in the strong, smooth character of reflection D. Mantle rocks exposed in the megamullion indicate that the feature formed during a period of extreme tectonic extension and probably limited magmatism. In conjugate crust corresponding to termination of the megamullion, observed sub-bottom reflections are interpreted as base of seismic layer 2A. This layer is as thick as or thicker (∼570-900 m) than layer 2A in normal Atlantic crust, and it suggests that relatively normal crustal accretion occurred by the time the megamullion stopped forming.     

3-D finite element modeling for evolution of stress field and interaction among strong earthquakes in Sichuan-Yunnan region

Introduction Sichuan-Yunnan region is a major area with frequent strong earthquakes in Chinese mainland, especially the middle-southern segment of South-North Seismic Zone, where many strong earth-quakes occurred in history. In the past 30 years, Sichuan-Yunnan region has two seismically active periods: one is from Tonghai earthquake in 1970 to Longling-Songpan earthquake in 1976, the other is from Lancang earthquake in 1988 to now. During this two periods, the M=7.7 Tonghai, M=7.1 Dagua…     

~(40)Ar/~(39)Ar dating of shear deformation of the Xianshuihe fault zone in west Sichuan and its tectonic significance

TheNW-SEstrikingXianshuihefaultzoneslicesthesoutheasternTibetanPlateauandconnectssoutheastwardwiththeAnninghe-Zemuhe-Xiaojiangfaultzone,whichformahuge,activesinistralstrike-slipfaultzone(fig.1).ThisfaultzoneisanimportantseismicfaultineastTibet[1-5].EarthquakegeologystudiesandoffsetpatternsofyounggeologicalfeatureshaveshownthatlateQuaternarysinistralsliprateoftheXianshuihefaultzonereaches13mm/a[1,2].TheXianshuhefaultzoneconsistsoftwomainbranches,theDaofufaultbranchinthewestandtheXianshuih…