The submarine eruption of the Bombarda volcano,Milos Island,Cyclades, Greece

The Milos volcanic field includes a well-exposed volcaniclastic succession which records a long history of submarine explosive volcanism. The Bombarda volcano, a rhyolitic monogenetic center, erupted ∼1.7 Ma at a depth <200 m below sea level. The aphyric products are represented by a volcaniclastic apron (up to 50 m thick) and a lava dome. The apron is composed of pale gray juvenile fragments and accessory lithic clasts ranging from ash to blocks. The juvenile clasts are highly vesicular to non-vesicular; the vesicles are dominantly tube vesicles. The volcaniclastic apron is made up of three fades: massive to normally graded pumice-lithic breccia, stratified pumice-lithic breccia, and laminated ash with pumice blocks. We interpret the apron beds to be the result of water-supported, volcaniclastic mass-How emplacement, derived directly from the collapse of a small-volume, subaqueous eruption column and from syn-eruptive, down-slope resedimentation of volcaniclastic debris. During this eruptive phase, the activity could have involved a complex combination of phreatomagmatic explosions and minor submarine effusion. The lava dome, emplaced later in the source area, is made up of flow-banded lava and separated from the apron by an obsidian carapace a few meters thick. The near-vertical orientation of the carapace suggests that the dome was intruded within the apron. Remobilization of pyroclastic debris could have been triggered by seismic activity and the lava dome emplacement. Published online: 30 January 2003 Editorial responsibility: J. McPhie     

POSITIVE INVERSION STRUCTURE OF THE CENTRAL STRUCTURE BELT IN TURPAN-HAMI BASIN

The central structure belt in Turpan-Hami basin is composed of the Huoyanshan structure and Qiketai structure formed in late Triassic-early Jurassic, and is characterized by extensional tectonics. The thickness of strata in the hanging wall of the growth fault is obviously larger than that in the footwall, and a deposition center was evolved in the Taibei sag where the hanging wall of the fault is located. In late Jurassic the collision between Lhasa block and Eurasia continent resulted in the transformation of the Turpan-Hami basin from an extensional structure into a compressional structure, and consequently in the tectonic inversion of the central structure belt of the Turpan-Hami basin from the extensional normal fault in the earlier stage to the compressive thrust fault in the later stage. The Tertiary collision between the Indian plate and the Eurasian plate occurred around 55Ma, and this Himalayan orogenic event has played a profound role in shaping the Tianshan area, only the effect of the collision to this area was delayed since it culminated here approximately in late Oligocene-early Miocene. The central structure belt was strongly deformed and thrusted above the ground as a result of this tectonic event.     

Seismic moment tensor representations and radiation patterns in unbounded media with elipsoidal cavities driven by low frequency pressure

ＳｅｉｓｍｉｃｍｏｍｅｎｔｔｅｎｓｏｒｒｅｐｒｅｓｅｎｔａｔｉｏｎｓａｎｄｒａｄｉａｔｉｏｎｐａｔｅｒｎｓｉｎｕｎｂｏｕｎｄｅｄｍｅｄｉａｗｉｔｈｅｌｉｐｓｏｉｄａｌｃａｖｉｔｉｅｓｄｒｉｖｅｎｂｙｌｏｗｆｒｅｑｕｅｎｃｙｐｒｅｓｓｕｒｅＰＩ...     

Constraints of Housing Age and Migration on Residential Mobility

This paper investigates the role of housing age in constraining residential mobility, measured as the percent of households that have moved into their homes in the past 15 months. The leading explanation for why mobility rates differ so much among regions of the United States has been the overall level of growth. The present analysis shows that the growth effect operates through both the newness of population (migration) and the newness of housing available for occupancy by all local residents. The posited explanation for this housing age effect is that progressively older units contain increasingly settled occupants, yielding fewer opportunities for in-movers in areas with older housing. It is empirically demonstrated that households in older housing have lower likelihood of recent mobility even after controlling for age, tenure, migration status, and state location of residence. The analysis reveals the temporal interdependency of mobility, migration, person age, and housing age.     

Effect of temperature on embryonic and larval development of bream (Abramis brama L.)

Influence of water temperature on embryonic and larval development of bream (Abramis brama L.) was stdied. Eggs of bream were incubated at eight constant water temperatures between 13.2 and 26.8°C. The temperature of 21.1°C gave highest hatching success, with no abnormalities in the eleutheroembryos and lowest mortality observed between eyed egg stage and the time of hatching. Developmental rate increased with increasing temperature. Duration of embryonic development (y; hours) decreased with increasing incubation temperature (x; °C) according to the formula: y=910.1−65.88 x+1.318 x². Larvae were reared at eight constant temperatures ranging from 13.5 to 34.0°C. The instantaneous growth rate in wet weight increased with increasing test temperature from 13.5 to 29.9°C, and then decreased at higher temperatures. Individual growth of fish and biomass production rate were highest at 27.9°C. This temperature is considered optimal when food availability and photoperiod are no limiting factors.     

ANALYSIS OF COMPOSITE DIAGNOSIS OF OCEANIC EXPLOSIVE CYCLONES*

Using the data of ECMWF (European Center for Medium-range Weather Forecasts) to undertake composite diagnoses of 16 explosive cyclones occurring at the Atlantic and the Pacific Oceans,it is found that there are a lot of obvious discrepancies on the basic fields between these strong and weak explosive cyclones.The major reasons why the explosive cyclones over the Atlantic are stronger than those over the Pacific Ocean are that the non-zonal upper jet and the low-level warm moist flow over the Atlantic are stronger.The non-zonal upper jet offers stronger divergence,baroclinicity and baroclinic instability fields for explosive cyclones.Anticyclonic curvature at the high level of strong explosive cyclones is easy to make the inertia-gravitational wave developing at the moment of northward transfer of energy and stimulate the cyclones deepening quickly.Warm advection and diabatic heating can cause the upper isobaric surface lifting,as a result,the anticyclone curvature of cyclones enlarges,and wave energy develops easily as well.The most powerful period of the development of explosive cyclones is just the time when the positive vorticity advection center is located over the low vortex.At the upper level,when the distribution of potential vorticity contours changes suddenly from rareness to denseness,and the large values of the potential vorticity both in the west and north sides of cyclones extend downwards together,then cyclones are easy to explosively develop.The formation of strong explosive cyclones is closely related with the non-zonality of upper jet and the anticyclonic curvature.     

The pelagic community of a gravel pit lake: Significance of Coleps hirtus viridis (Prostomatida) and its role as a scavenger

Coleps hirtus viridis was the dominant species of the planktonic ciliate community of Lake Fühlinger See (Germany) during the study in 1999 and 2000. Total ciliate densities ranged from 120 to 42,000 ind. l⁻¹ in 1999 and up to 8,000 ind. l⁻¹ in 2000. Coleps contributed up to 98% to both total ciliate abundance and biomass and made up an average of 64% of the total ciliate biomass. Oligotrichs (Rimostrombidium, Strobilidium) dominated the epilimnetic zone, whereas peritrich ciliates (Pelagovorticella, Vorticella) were predominantly located in the hypolimnion. The population maximum of Coleps changed locations from the epilimnion in early summer to the hypolimnion (up to 40,000 ind. l⁻¹) during stratification. High growth rates in the hypolimnion, presence of endosymbiontic algae and the ability to ingest detritus seem to be important for the success.Growth rates of Coleps in June were determined by Landry-Hassett dilution experiments in both the epilimnion and the hypolimnion. The instantaneous growth rates were similar in both layers (0.6 d⁻¹), but a distinctly higher instantaneous mortality was estimated for the epilimnion. These high loss rates may be due to grazing pressure by cladocerans.The significance of the histophagous feeding of Coleps was evaluated through an experiment using killed zooplankton. Parts of Daphnia magna were incorporated at rates of about 1,100 μm³ ind.⁻¹ h⁻¹ by Coleps without endosymbiotic algae and at rates of 500 μm³ ind.⁻¹ h⁻¹ by Coleps with endosymbionts. These high feeding rates support the conclusion that Coleps can use dead organic matter as an additional food source.     

2003年异常气候对清徐葡萄的影响

气候对葡萄生长发育的影响十分关键，以光照、温度和降水三要素为主。利用清徐地面气象资料，根据葡萄各生育阶段对气候资源的需求特点，比照该时期年内的实际气候状况，着重分析年度内气候异常与葡萄产量下降、品质降低之间的关系，并就如何减缓气候对葡萄生产的不利影响进行初步探讨。     

Isotope provinces, mechanisms of generation and sources of the continental crust in the Central Asian mobile belt: geological and isotopic evidence

The available geological, geochronological and isotopic data on the felsic magmatic and related rocks from South Siberia, Transbaikalia and Mongolia are summarized to improve our understanding of the mechanisms and processes of the Phanerozoic crustal growth in the Central Asian mobile belt (CAMB). The following isotope provinces have been recognised: ‘Precambrian’ (T_DM=3.3–2.9 and 2.5–0.9 Ga) at the microcontinental blocks, ‘Caledonian’ (T_DM=1.1–0.55 Ga), ‘Hercynian’ (T_DM=0.8–0.5 Ma) and ‘Indosinian’ (T_DM=0.3 Ga) that coincide with coeval tectonic zones and formed at 570–475, 420–320 and 310–220 Ma. Continental crust of the microcontinents is underlain by, or intermixed with, ‘juvenile’ crust as evidenced by its isotopic heterogeneity. The continental crust of the Caledonian, Hercynian and Indosinian provinces is isotopically homogeneous and was produced from respective juvenile sources with addition of old crustal material in the island arcs or active continental margin environments. The crustal growth in the CAMB had episodic character and important crust-forming events took place in the Phanerozoic. Formation of the CAMB was connected with break up of the Rodinia supercontinent in consequence of creation of the South-Pacific hot superplume. Intraplate magmatism preceding and accompanying permanently other magmatic activity in the CAMB was caused by influence of the long-term South-Pacific plume or the Asian plume damping since the Devonian.     

Sedimentology and kinematics of a large, retrogressive growth-fault system in Upper Carboniferous deltaic sediments, western Ireland

Growth faulting is a common feature of many deltaic environments and is vital in determining local sediment dispersal and accumulation, and hence in controlling the resultant sedimentary facies distribution and architecture. Growth faults occur on a range of scales, from a few centimetres to hundreds of metres, with the largest growth faults frequently being under‐represented in outcrops that are often smaller than the scale of feature under investigation. This paper presents data from the exceptionally large outcrops of the Cliffs of Moher, western Ireland, where a growth‐fault complex affects strata up to 60 m in thickness and extends laterally for ≈ 3 km. Study of this Namurian (Upper Carboniferous) growth‐fault system enables the relationship between growth faulting and sedimentation to be detailed and permits reconstruction of the kinematic history of faulting. Growth faulting was initiated with the onset of sandstone deposition on a succession of silty mudstones that overlie a thin, marine shale. The decollement horizon developed at the top of the marine shale contact for the first nine faults, by which time aggradation in the hangingwall exceeded 60 m in thickness. After this time, failure planes developed at higher stratigraphic levels and were associated with smaller scale faults. The fault complex shows a dominantly landward retrogressive movement, in which only one fault was largely active at any one time. There is no evidence of compressional features at the base of the growth faults, thus suggesting open‐ended slides, and the faults display both disintegrative and non‐disintegrative structure. Thin‐bedded, distal mouth bar facies dominate the hangingwall stratigraphy and, in the final stages of growth‐fault movement, erosion of the crests of rollover structures resulted in the highest strata being restricted to the proximity of the fault. These upper erosion surfaces on the fault scarp developed erosive chutes that were cut parallel to flow and are downlapped by the distal hangingwall strata of younger growth faults.