桩底注浆钻孔灌注桩承载力的研究

通过天津地区几例钻孔灌注桩桩底注浆的静载荷试桩结果 ,分析天津地区钻孔灌注桩桩底注浆单桩竖向极限承载力标准值的估算方法     

垫层对CFG桩复合地基影响的分析

对CFG桩复合地基垫层进行分析 ,探讨了垫层厚度和模量对桩土应力比、桩侧摩阻力、沉降变形、承载力的影响 ,并得出一些规律     

An invariance in the carbazoles of petroleum

A remarkable invariance in the ratio of 1,3-dimethylcarbazole （DMC） to 1,6-DMC was discovered in crude oils from the Pearl River Mouth Basin, South China Sea. The remarkably invariant ratio is kept at a constant of about unity regardless of their concentrations, sources or maturities for the sampies. In combination with the molecular structures of 1,3- and 1,6-DMCs, the invariance might indicate that the nitrogen compounds share a common precursor with a skeleton of 1-methylcarbazole and are formed through methylation at C3 and C6 with an essentially identical rate.     

Soil liquefaction during the Arequipa Mw 8.4, June 23, 2001 earthquake, southern coastal Peru

The Arequipa June 23, 2001, earthquake with a moment magnitude of Mw 8.4 struck southern Peru, northern Chile and western Bolivia. This shallow (29 km deep) interplate event, occurring in the coupled zone of the Nazca subduction next to the southeast of the subducting Nazca ridge, triggered very localized but widely outspread soil liquefaction. Although sand blows and lateral spreading of river banks and road bridge abutments were observed 390 km away from the epicenter in the southeast direction (nearing the town of Tacna, close to the Chile border), liquefaction features were only observed in major river valleys and delta and coastal plains in the meizoseismal area. This was strongly controlled by the aridity along the coastal strip of Southern Peru. From the sand blow distribution along the coastal area, a first relationship of isolated sand blow diameter versus epicentral distance for a single event is ever proposed. The most significant outcome from this liquefaction field reconnaissance is that energy propagation during the main June 23, 2001, event is further supported by the distribution and size of the isolated sand blows in the meizoseismal area. The sand blows are larger to the southeast of the epicenter than its northwestern equivalents. This can be stated in other words as well. The area affected by liquefaction to the northwest is less spread out than to the southeast. Implications of these results in future paleoliquefaction investigations for earthquake magnitude and epicentral determinations are extremely important. In cases of highly asymmetrical distribution of liquefaction features such as this one, where rupture propagation tends to be mono-directional, it can be reliably determined an epicentral distance (between earthquake and liquefaction evidence) and an earthquake magnitude only if the largest sand blow is found. Therefore, magnitude estimation using this uneven liquefaction occurrence will surely lead to underrating if only the shortest side of the meizoseismal area is unluckily studied, which can eventually be the only part exhibiting liquefaction evidence, depending on the earthquake location and the distribution of liquefaction-prone environments.     

Geologic and geotechnical effects of an impact caused by an airplane crash

A Turkish Airlines (THY) Boeing 737-400 plane crashed into alluvial soils creating an approximately 13 m deep and 30 m wide crater near the village of Adatepe, Ceyhan in southern Turkey. Effects of the impact on the soils in and around the crater were investigated from both the geological and soil mechanics point of view.

The results show that the impact caused severe deformations in the soils in and around the crater. The soils deformed similar to metamorphic rocks seen at many terrestrial hypervelocity impact craters around the world and became overconsolidated up to a distance of about 10 m from the crater wall as a result of the impact.

Also, the crash was recorded as a 2.7 magnitude earthquake by a nearby microtremor seismograph which provided both the location (epicenter) and time of the crash which was not known immediately after the crash.     

泥石流运动衰减动力学初步研究

我国公路泥石流病害严重，泥石流淤埋公路构建筑物是一类常见的公路泥石流病害类型。泥石流衰减动力学是防治泥石流淤埋病害的重要关键技术，也是泥石流运动学、动力学研究的核心问题之一。本文作者运用泥沙运动力学及流体力学原理，初步建立了泥石流固相颗粒和液相浆体的能量衰减条件，把泥石流衰减模式概化为两类，即能量抑制衰减和能量自由衰减；通过泥石流沉积模型试验，得到了不同粘度泥石流体的沉积扇变化形态，随着泥石流体粘度的增大，沉积扇边缘变陡、扩展范围变小、纵轴线长度减小等结论与实际情况吻合；初步建立了泥石流能量衰减速率计算方法。研究成果为防治公路泥石流病害奠定了基础。     

用叠加谱比法研究新疆地区Lg尾波Q值的区域性变化

运用叠加谱比法,对分布于新疆地区的5个台站所记录的51个地震数据进行分析,得出与各射线路径相对应的Lg尾波Q0(Lg尾波在1Hz处的Q)值。结果表明:Q0值呈现出明显的区域性变化特点,与构造活动关系紧密。在较为稳定的塔里木地台,Q0呈现出高值,在350～450之间。在南部构造活动较为激烈的昆仑褶皱系,Q0呈现出较低的值,约为200～250。在构造活动最为激烈的帕米尔地区,Q0值在170～200之间。在北部的天山褶皱系,Q0值约为220～270。准葛尔褶皱系比天山褶皱系的Q0值略高,约为260～290。     

Liquefaction potential evaluations by energy-based method and stress-based method for various ground motions

An energy-based liquefaction potential evaluation method (EBM) previously developed was applied to a uniform sand model shaken by seismic motions recorded at different sites during different magnitude earthquakes. It was also applied to actual liquefaction case histories in Urayasu city during the 2011 M9.0 Tohoku earthquake and in Tanno-cho during the 2003 M8.0 Tokachi-oki earthquake. In all these evaluations, the results were compared with those by the currently used stress-based method (SBM) under exactly the same seismic and geotechnical conditions. It was found that EBM yields similar results with SBM for several ground motions of recent earthquakes but has easier applicability without considering associated parameters. In Urayasu city, the two methods yielded nearly consistent results by using an appropriate coefficient in SBM for the M9.0 earthquake, though both overestimated the actual liquefaction performance, probably because effects of plasticity and aging on in situ liquefaction strength were not taken into account. In Tanno-cho, EBM could evaluate actual liquefaction performance due to a small-acceleration motion during a far-field large magnitude earthquake while SBM could not.     

Computational model coupling mode II discrete fracture propagation with continuum damage zone evolution

We propose a numerical method that couples a cohesive zone model (CZM) and a finite element‐based continuum damage mechanics (CDM) model. The CZM represents a mode II macro‐fracture, and CDM finite elements (FE) represent the damage zone of the CZM. The coupled CZM/CDM model can capture the flow of energy that takes place between the bulk material that forms the matrix and the macroscopic fracture surfaces. The CDM model, which does not account for micro‐crack interaction, is calibrated against triaxial compression tests performed on Bakken shale, so as to reproduce the stress/strain curve before the failure peak. Based on a comparison with Kachanov's micro‐mechanical model, we confirm that the critical micro‐crack density value equal to 0.3 reflects the point at which crack interaction cannot be neglected. The CZM is assigned a pure mode II cohesive law that accounts for the dependence of the shear strength and energy release rate on confining pressure. The cohesive shear strength of the CZM is calibrated by calculating the shear stress necessary to reach a CDM damage of 0.3 during a direct shear test. We find that the shear cohesive strength of the CZM depends linearly on the confining pressure. Triaxial compression tests are simulated, in which the shale sample is modeled as an FE CDM continuum that contains a predefined thin cohesive zone representing the idealized shear fracture plane. The shear energy release rate of the CZM is fitted in order to match to the post‐peak stress/strain curves obtained during experimental tests performed on Bakken shale. We find that the energy release rate depends linearly on the shear cohesive strength. We then use the calibrated shale rheology to simulate the propagation of a meter‐scale mode II fracture. Under low confining pressure, the macroscopic crack (CZM) and its damaged zone (CDM) propagate simultaneously (i.e., during the same loading increments). Under high confining pressure, the fracture propagates in slip‐friction, that is, the debonding of the cohesive zone alternates with the propagation of continuum damage. The computational method is applicable to a range of geological injection problems including hydraulic fracturing and fluid storage and should be further enhanced by the addition of mode I and mixed mode (I+II+III) propagation. Copyright © 2016 John Wiley & Sons, Ltd.