箱式超大型浮体在非均匀海洋环境下的水弹性试验

超大型浮体(Very Large foating Structure,VLFS)作为人类开发海洋的前沿基地,正在成为世界各国海洋工程界研究的一个热点。由于超大型浮体覆盖的面积比普通的船舶和海洋结构物要大很多,其首尾两端所处的海洋环境可能有显著的差异,因此必须考虑非均匀海洋环境对其水弹性性能的影响。介绍了国内首次进行的箱式超大型浮体在非均匀海洋环境中的水弹性试验,对非均匀海洋环境、超大型浮体的水弹性性能以及两者相互之间的关系进行了研究。     

Effect of viscous,viscoplastic and friction damping on the response of seismic isolated structures

In this paper the efficiency of various dissipative mechanisms to protect structures from pulse‐type and near‐source ground motions is examined. Physically realizable cycloidal pulses are introduced, and their resemblance to recorded near‐source ground motions is illustrated. The study uncovers the coherent component of some near‐source acceleration records, and the shaking potential of these records is examined. It is found that the response of structures with relatively low isolation periods is substantially affected by the high‐frequency fluctuations that override the long duration pulse. Therefore, the concept of seismic isolation is beneficial even for motions that contain a long duration pulse which generates most of the unusually large recorded displacements and velocities. Dissipation forces of the plastic (friction) type are very efficient in reducing displacement demands although occasionally they are responsible for substantial permanent displacements. It is found that the benefits by hysteretic dissipation are nearly indifferent to the level of the yield displacement of the hysteretic mechanism and that they depend primarily on the level of the plastic (friction) force. The study concludes that a combination of relatively low friction and viscous forces is attractive since base displacements are substantially reduced without appreciably increasing base shears and superstructure accelerations. Copyright © 2000 John Wiley & Sons, Ltd.     

Compensation of time‐delay for control of civil engineering structures

Time‐delay is an important issue in structural control. Applications of unsynchronized control forces due to time‐delay may result in a degradation of the control performance and it may even render the controlled structures to be unstable. In this paper, a state‐of‐the‐art review for available methods of time‐delay compensation is presented. Then, five methods for the compensation of fixed time‐delay are presented and investigated for active control of civil engineering structures. These include the recursive response method, state‐augmented compensation method, controllability based stabilization method, the Smith predictor method and the Pade approximation method, all are applicable to any control algorithm to be used for controlled design. Numerical simulations have been conducted for MDOF building models equipped with an active control system to demonstrate the stability and control performance of these time‐delay compensation methods. Finally, the stability and performance of the phase shift method, that is well‐known in civil engineering applications, have also been critically evaluated through numerical simulations. Copyright © 2000 John Wiley & Sons, Ltd.     

基于大涡模拟与被动示踪物模型的人工鱼礁数值研究

投放人工鱼礁是解决海洋生态环境问题的重要措施之一。通过使用并行大涡模拟模式（the parallelizeda large-eddy simulation model,PALM）及被动示踪物模型模块,研究了不同流速条件（0.1,0.2,0.4和0.6 m/s）下方型人工鱼礁对流场形态、营养盐的抬升作用、和湍流动能收支的影响。研究表明,鱼礁的存在使得其附近垂向速度增大,产生上升流。受到上升流的抬升作用,鱼礁底部的示踪物迅速进入海洋上层,之后遇到鱼礁后方的背涡流,示踪物的抬升受阻,高度逐渐降低。在上升流区域以及背涡流区域的共同影响下,示踪物抬升区域的最大高度与来流流速无关。不同上升流定义对应的上升流区域的高度与来流流速均不相关;上升流区域的最大速度、平均速度与来流流速都成线性增加的关系;然而随着来流流速的增大,不同上升流定义对应的上升流区域面积的变化趋势却完全不同。投放鱼礁后,鱼礁区域底部的混合增强,区域底部的能量被输运至上层。这说明,鱼礁的存在不仅对营养物质具有抬升作用,还能将能量向上输运。     

青藏高原东南缘活动断裂的地震应变能释放系统研究

本文以青藏高原东南缘为研究区域,利用G-R震级能量经验公式和Benioff地震应变能释放曲线,对该区域内1500年以来的历史地震应变能释放进行了系统性的研究。文中给出了各断裂带和断块区的地震应变能释放周期表,及相应的地震危险性。分析发现研究区域地震应变能的释放具有东强西弱,南强北弱的特征,整体上各断层断块区的历史地震应变能释放符合准周期模式,某些断层和断块区上的地震周期具有某种程度上的同步现象。青藏高原东南缘现今处于大释放期中,地震的危险性不能忽视。局部结果显示,安宁河-则木河断裂带、小江断裂带的危险性很高,对于这些危险区要重点跟踪研究。今后仍需结合不同研究方法来提高地震危险性评估的可靠性。     

2015年尼泊尔MS8.1大地震孕育的深层过程与发生的动力学响应

2015年4月25日发生在尼泊尔博克拉M_S8.1大地震的深层动力过程与“地中海-喜马拉雅-南亚地震带”的中段喜马拉雅地震活动带密切相关.这次大地震是该地震强烈活动带上长期以来深部物质与能量强烈交换、运动,并导致构造活动和应力积累的产物.综合分析与研究提出：（1）博克拉M_S8.1大地震的孕育、发生和发展具有长期活动和近年来相邻地带地震活动频繁的背景;这一地带自1505年-2015年,即500多年来相继发生多次M_S≥8.0的大地震.（2）这一地带具有特异的地球物理边界场响应和深层动力过程,显示深部物质的重新分异、调整与能量交换.（3）大地震发生与周边地带应力场分布特异,壳、幔结构与介质属性变异及破裂响应与断层面解的属性相关.（4）喜马拉雅地带的三条北倾断裂带以不同角度向深部延伸、震源位置及浅表层的变形特征尚应深化理解.（5）M_S8.1大地震的发生对相邻地带的波场影响强烈,故应强化高精度地球物理场的观测和探测,以“捕捉”未来可能大地震的孕育与发生.     

Effects of rainfall on oil droplet size and the dispersion of spilled oil with application to Douglas Channel,British Columbia,Canada

Raindrops falling on the sea surface produce turbulence. The present study examined the influence of rain-induced turbulence on oil droplet size and dispersion of oil spills in Douglas Channel in British Columbia, Canada using hourly atmospheric data in 2011–2013. We examined three types of oils: a light oil (Cold Lake Diluent - CLD), and two heavy oils (Cold Lake Blend - CLB and Access Western Blend - AWB). We found that the turbulent energy dissipation rate produced by rainfalls is comparable to what is produced by wind-induced wave breaking in our study area. With the use of chemical dispersants, our results indicate that a heavy rainfall (rain rate > 20 mm h^? 1) can produce the maximum droplet size of 300 μm for light oil and 1000 μm for heavy oils, and it can disperse the light oil with fraction of 22–45% and the heavy oils of 8–13%, respectively. Heavy rainfalls could be a factor for the fate of oil spills in Douglas Channel, especially for a spill of light oil and the use of chemical dispersants.     

Determination of the seismic performance factors for post‐tensioned rocking timber wall systems

Post‐tensioned technologies for concrete seismic resistant buildings were first developed in the 1990s during the PREcast Seismic Structural Systems program. Among different solutions, the hybrid system proved to be the most resilient solution providing a combination of re‐centering and energy dissipative contributions respectively by using post‐tensioned tendons and mild steel reinforcement. The system, while providing significant strength and energy dissipation, reduces structural element damage and limits post‐earthquake residual displacements. More recently, the technology was extended to laminated veneer lumber (LVL) structural members, and extensive experimental and numerical work was carried out and allowed the development of reliable analytical and numerical models as well as design guidelines. On the basis of the experimental and numerical outcomes, this paper presents the evaluation of the seismic performance factors for post‐tensioned rocking LVL walls using the FEMA P‐695 procedure. Several archetype buildings were designed considering different parameters such as the building and story height, the type of seismic resistant system, the magnitude of gravity loads and the seismic design category. Lumped plasticity models were developed for each index archetype to simulate the behavioral aspects and collapse mechanisms. Non‐linear quasi‐static analyses were carried out to evaluate the system over‐strength factor; moreover, non‐linear time history analyses were performed using the incremental dynamic analysis concept to assess the collapse of each building. From the results of quasi‐static and dynamic analyses the response modification factor, R, system over‐strength factor, Ω₀, and deflection amplification factor, C_d, values of, respectively, 7, 3.5 and 7.5 are recommended. Copyright © 2016 John Wiley & Sons, Ltd.     

Cyclic behavior and failure mechanism of self‐centering energy dissipation braces with pre‐pressed combination disc springs

A new type of bracing system composed of friction energy dissipation devices for energy dissipation, pre‐pressed combination disc springs for self‐centering and tube members as guiding elements is developed and experimentally studied in this paper. The mechanics of this system are explained, the equations governing its hysteretic responses are outlined and large‐scale validation tests of two braces with different types of disc springs are conducted under the condition of low cyclic reversed loading. The experimental results demonstrate that the proposed bracing system exhibits a stable and repeatable flag‐shaped hysteretic response with an excellent self‐centering capability and effective energy dissipation throughout the loading protocol. Furthermore, the maximum bearing force and stiffness are predicted well by the equations governing its mechanical behavior. Fatigue and destructive test results demonstrate that the proposed bracing system can maintain stable energy dissipation and self‐centering capabilities under large deformation cyclic loading even when the tube members exceed the elastic limit and that a larger bearing capacity is achieved by the system that has disc springs without a bearing surface. Copyright © 2016 John Wiley & Sons, Ltd.     

A finite element model for seismic response analysis of deformable rocking frames

A new finite element model to analyze the seismic response of deformable rocking bodies and rocking structures is presented. The model comprises a set of beam elements to represent the rocking body and zero‐length fiber cross‐section elements at the ends of the rocking body to represent the rocking surfaces. The energy dissipation during rocking motion is modeled using a Hilber–Hughes–Taylor numerically dissipative time step integration scheme. The model is verified through correct prediction of the horizontal and vertical displacements of a rigid rocking block and validated against the analytical Housner model solution for the rocking response of rigid bodies subjected to ground motion excitation. The proposed model is augmented by a dissipative model of the ground under the rocking surface to facilitate modeling of the rocking response of deformable bodies and structures. The augmented model is used to compute the overturning and uplift rocking response spectra for a deformable rocking frame structure to symmetric and anti‐symmetric Ricker pulse ground motion excitation. It is found that the deformability of the columns of a rocking frame does not jeopardize its stability under Ricker pulse ground motion excitation. In fact, there are cases where a deformable rocking frame is more stable than its rigid counterpart. Copyright © 2016 John Wiley & Sons, Ltd.