Elements pollution in the extremely high tumor risk residents in Chaoshan littoral, southern China

Background ＆ aim： To investigate and analyze the elements pollution in the extremely high tumor risks residents in the Chaoshan littoral, southern China. Methods： 19 elements including Cr, Mn, Ni, Sr, Pb, Zn, Co, Sn, Th, Tl, Se, Hg, Cu, Mo, Cd, Sb, U, Ge, As, and Al were measured from 145 hair samples of residents from the high-risk Nanao Island （mortality of cancer 173-156/106 in recent 30 years）, Shantou high-risk village （mortality of cancer 230.4/106 in recent three years）, and two controls Shanwei （mortality of cancer 32/106 in 1970s） and Meizhou Hakka （incidence of cancer 103/106 ） using AAS, AFS, ICP-MS methods collaborated with Beijing University. And 21 samples of water, 18 samples office from the Nanao Island, Shantou high-risk village, and other low-risk controls were measured using the same methods. Results： The element analysis showed that levels of CD, PB in the Shantou high-risk village were the highest, Hg, MN, SR, SB, TH, U on the Nanao Island were the highest in hairs. Conclusions： It is indicated that there occurred elements pollution among the local high-risk population.     

Environmental geohydrochemistry and health of the high altitude population in Ladakh

Background： Radiographic signs of Pneumoconiosis found in farming Ladakhi despite absences of mines and industries were believed to be due to exposure to frequent dust storms and domestic fire pollutions. Seasonal Koilonychia （spoon nail） occurring predominantly in farming women in absences of iron deficiency anaemia was thought to arise from exposure to water made alkaline by weathering of hornblende minerals. The relation of these health conditions to environmental geohydrochemistry is postulated as the source of irrigation water in the affected population originates from glaciers in trans-Himalaya range of sedimentary geology and steep landscape favouring flushing of silica/silicate containing silts. Methods and results： Survey in two central Ladakh villages revealed radiographic evidence of silicosis in all middle aged women and half in middle aged men. In a large-scale study of 3105 subjects aged over 30 years from three villages; 101 （22.5%） of the 449 radiographed showed signs of pneumoconiosis （ILO 1980 criteria） including eggshell calcification of hilar gland and progressive massive fibrosis. Indoor dust analyzed using Philips 400T electron microscope with energy dispersive analysis system attached showed SiO2 levels upto 53.27% with particle size of 0.5 to 5.0 microns and the concentration during cooking period in the worst affected area was 7.495 mg/m^3. Microscopy and histopathology from the subject was characteristic of pneumoconiosis. Analysis of the inorganic dust in the lung showed 40.2% muscovite, 37.3% quartz with the extracted dust wt 147.9 mg/gm of dry tissue. Prevalence of chronic cough with chronic phlegm and percentage of villagers with FEV1/FVC ratio of less than 65% rose with age. Of 70 subjects studied 19 women and 2 men had Koilonychia with incidence being highest in summer. Absence of seasonal Koilonychia in villages fed by water derived from northern mountain range glaciers with mainly igneous geology supports our hypothesis.     

Anomalous geochemical provenance and weathering history of Plio-Pleistocene glaciomarine fjord strata, Bardin Bluffs Formation, East Antarctica

Major and trace element chemical analyses of the Plio‐Pleistocene Bardin Bluffs Formation, on the margin of a major ice‐stream of the East Antarctic Ice Sheet, yield an anomalous chemically altered sediment composition. The Bardin Bluffs Formation of the Pagodroma Group is one of the key deposits on the Antarctic continent recording glaciomarine sedimentation under open marine fjord conditions as recently as the Plio‐Pleistocene. In modern fjords occupied by outlet glaciers of ice sheets, the composition of fine‐grained terrigenous sediments approaches that of unweathered rock types exposed upstream. In the Bardin Bluffs Formation, average abundances of stable elements (Ti, Al, Zr) approach average upper crustal compositions and the element ratios are consistent with sediments with a cratonic source, implying glacial dispersal from a large shield area through the Lambert Glacier drainage system. Interestingly, the chemical index of alteration (CIA) of these sediments has values similar to those of average shales formed under conditions of chemical weathering. The sediments are particularly depleted in silicate Ca, which has been observed elsewhere in glacial muds sourced from pre‐glacial saprolites. The anomalous chemistry of the Bardin Bluffs Formation can be explained by a sequence of events, involving chemical weathering prior to glacial expansion and erosion. The presence of a remnant 1·5 m deep late Neogene weathering profile at the base of the Bardin Bluffs sequence corroborates this conclusion. Supply of large quantities of chemically weathered materials to Antarctic marginal basins requires at least partial deglaciation of the continent and was previously regarded as uncharacteristic for late Neogene Antarctica.     

Geochemistry and Origin of Ananai Stratiform Manganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. Major and trace element contents are reported for Permian manganese ore and associated greenstone from the Ananai manganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The manganese deposit occurs between greenstone and red chert, or among red chert beds. Chemical compositions of manganese ore are characterized by enrichments in Mn, Ca, P, Co, Ni, Zn, Sr and Ba, and negative Ce and positive Eu anomalies relative to post-Archean average Australian Shale (PAAS). Geochemical features of the manganese ore are similar to those of modern submarine hydrother-mal manganese deposits from volcanic arc or hotspot setting. In addition, geochemical characteristics of the greenstone closely associated with the Ananai manganese deposit are analogous to those of with-in plate alkaline basalt (WPA). Consequently, the Ananai manganese deposit was most likely formed by hydrothermal activity related to hotspot volcanism in the Panthalassa Ocean during the Middle Permian. This is the first report documenting the terrestrially-exposed manganese deposit that was a submarine precipitate at hotspot.     

用于砾石夹层钻进的新型PDC钻头的研制与使用

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。     

Discrete numerical modelling of rockfill dams

The aim of this study is to obtain quantitative information on the behaviour of rockfill used in embankment dams, and particularly on the influence of block breakage on the displacement field, from a numerical analysis using the Distinct element method. A methodology is set up to define the resistance of the 2D particles so that the same probability of breaking blocks may be reproduced as in a 3D material. The model uses the discrete element code PFC^2D (Itasca Consulting Group Inc., PFC2D (Particle Flow Code in Two Dimensions), Version 3.0, 2002) and considers breakable clusters of 2D balls. The different parameters are determined from experimental data obtained from laboratory tests performed on rock blocks. The model is validated by comparing the results of the simulation of shearing tests with actual triaxial tests on rockfill material published in the literature. The numerical analysis of block crushing in an actual dam is proposed in the last part of this paper. Copyright © 2006 John Wiley & Sons, Ltd.     

Geochemistry of recent hydrothermal systems of Mendeleev Volcano （Kuril Islands） and surrounding waters

On the Kuril Islands there are 85 volcanoes, 39 of which are active. Hot springs and mud pots are wide spread in this area and have significant inputs on the chemical composition of the surrounding surface waters and environment. We present results of trace elements as well as data on H, O, S, and He isotope ratios for hydrothermal systems of the Mendeleev Volcano （Kunashir Island） and surrounding surface waters. Water and gas samples were taken from springs and holes as well as creeks and the Lesnaya River. Among the thermal water types, three main groups can be distinguished. The first group includes the waters, in which SO4^- ion predominant. The water temperature on the surface reaches 97℃, and TDS varies from a few g/L to 7 g/L. These waters are acid to superacid with pH values ranging 0.6 to 2.3. The second group is sodium-chloride waters. A maximum TDS is 14.2 g/L. The waters are neutral or alkaline; pH varies from 6.9 to 8.2. The third group is the sodium-chloride-sulfate-bicarbonate water. The Stolbovskie springs, located in the periphery of the Mendeleev Volcano are representative of this type. The pH of these waters is close to neutral. TDS is 1.9 g/L. They are rather the derivatives of sodium-chloride waters arisen from dilution of them by subsurface waters. The Kuslyi Creek and Lesnaya River are located near the Mendeleev Volcano. The most acid springs discharge into the Kislyi Creek as a result pH of this creek being 2.5, and contents of most elements rather high. For example, the contents of dissolved solids of Si, Fe, Al, Mn, Zn, in waters of the Kislaya Creek are 22.1, 8.1, 6.2, 1.29, and 0.28 mg/L, and correspondently. The water of the Lesnaya River, （Before the Kislyi Creek, pH is about 8 with TDS 102 mg/L, but after the Kuslyi Creek, pH decreases and the concentrations of chemical elements increase. Debit of the Kislayi Creek in summer season is about 370 L/sec. It means that every day only this small creek inputs in the Lesnay River about 706 kg of Si;     

Naturally acidic and metalliferous waters at unmined volcanogenic massive sulfide deposits in the Bonnifield mining district, Alaska Range, east-central Alaska

The Bonnifield district hosts 26 tmmined volcanogenic massive sulfide （VMS） occurrences. Environmental geochemical samples of water and stream sediment were collected at several occurrences, concentrating on the two best-exposed and largest deposits, Red Mountain （RM） and Sheep Creek （SC）. Limited samples were also collected at the poorly exposed WTF deposit. The deposits are Late Devonian to Early Mississippian, and are hosted by felsic metavolcanic and carbonaceous schist members of the Totatlanika Schist or Keevy Peak Fm. Spring and stream waters at RM and SC have pH values commonly 〈3.5 （as low as 2.4 at RM and 2.5 at SC）, high conductivity （up to 11000 μS/cm）, and very high （Is to 100s mg/L） dissolved contents of Al, Cd, Co, Cu, Fe, Ni, and Pb. Waters at RM are characterized by extremely high REE contents （summed REE median 3200 μg/L, n=33）. At both RM and SC, pyrite oxidation and dissolution produce low pH waters that interact with and dissolve bedrock minerals, resulting in acidic, metal-laden, naturally degraded streams that are mostly devoid of aquatic life. Ferricrete is common. In contrast, WTF barely produces a surficial environmental footprint, mostly due to topography and relief. RM and SC are well exposed in the areas of relatively high relief, and both exhibit extensive areas of quartz-sericite-pyrite-alteration. While WTF shares many of the same deposit-and alteration characteristics, it is concealed by tundra in a large, nearly flat area. Surface water at WTF is absent and outcrops are sparse. Even though WTF is roughly the same size as Red Mountain （both around 3 million tonnes） and has similar base- and precious-metal grades, the surficial geochemical manifestation of WTF is minimal. However, exposure through mining of the altered, mineralized rock at WTF potentially could initiate the same processes of pyrite oxidation, acid generation, and mineral dissolution that are observed naturally at RM and SC.     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.