伸展地区铲式正断层作用及其大地测量观测

铲式正断层作用是伸展构造区最主要的构造运动形式。本文根据铲式正断层作用的几何学、运动学特征,结合华北平原伸展区大地测量观测成果,探讨伸展区构造形变铲式正断层现今活动的地表形变效应及其动态特征。     

山西义兴寨金矿床金矿物颗粒的产出及其成矿动力学意义

山西义兴寨金矿床的金主要呈包体金和裂隙金两种产出状态.文章根据成矿地球化学动力学理论,论证了金元素在含矿断裂发生脆性破裂和脆-韧性扩张活动中析出的化学反应类型,以及受反应动力学条件的制约,形成矿石中金不同产出状态的规律.指出热液矿床中普遍存在的包体金为热液成矿早期阶段断裂发生脆性破裂和成矿流体沸腾,导致快速反应结晶的产物;而裂隙金和晶隙金为成矿晚期金等矿质在流体中残余富集,同时成矿断裂再次发生脉动破裂,即成矿热力学演化与有利的构造动力学因素耦合作用的结果.得出金矿物颗粒的产出状态具有成矿动力学意义的结论.     

不同温压下岩石弹性波速度、衰减及各向异性与组构的关系

结合岩石组构分析 ,阐述了岩石弹性波传播速度和衰减以及它们的各向异性与岩石组构之间的关系。在不同温压条件下对具有很强晶格优选方位的岩石样品的研究表明 ,随着围压的增加 ,波速和Q值均增大 ,但是在相互正交的 3个方向上 (垂直或平行于层理面及线理方向 )增大的速度并不相同 ,这与微裂隙的逐渐闭合密切相关。观测到的波速和Q值的各向异性具有不同的形成机理 ,波速各向异性主要与定向分布的微裂隙和主要矿物的晶格优选方位等构造因素有关 ;高围压下Q值各向异性与速度各向异性正好相反 ,可能是由于定向排列的矿物晶体沿不同方向其边界之间接触程度不同造成的。对岩石组构的研究不仅可以揭示岩体的变形机制、变形的动力学过程及其有关的热力学信息 ,还可以对宏观岩石的各种物理性质 ,尤其是力学特性 ,从微观机理上加以解释。文中特别强调了岩石组构分析对研究岩石物理性质的各向异性具有十分重要的意义。     

Influence of long‐period filter cut‐off on elastic spectral displacements

The effect of the long‐period filter cut‐off, T_c, on elastic spectral displacements is investigated using a strong ground‐motion database from Europe and the Middle East. The relation between the filter and oscillator responses is considered to observe the influence of T_c for both analogue and digital records, and the variations with site classification, magnitude, filter order and viscous damping. Robust statistics are derived using the re‐processed European data to generalize the effects of the long‐period filter cut‐off on maximum oscillator deformation demands as a function of these seismological and structural features. Statistics with a 95% confidence interval are derived to suggest usable period ranges for spectral displacement computations as a function of T_c. The results indicate that the maximum period at which spectral displacements can be confidently calculated depend strongly on the site class, magnitude and filter order. The period range where reliable long‐period information can be extracted from digital accelerograms is twice that of analogue records. Copyright © 2006 John Wiley & Sons, Ltd.     

阿拉斯加输油管的设计和施工方式方案变更过程及其背后的原因和哲学思想

阿拉斯加输油管道公司曾经研发和使用了3种主要施工方案和技术:传统地埋式、特殊埋设和地上敷设方式.在传统地埋式施工方案中,管顶埋深变化于0.9~2.7 m.这主要是考虑了地形变化,而不是沿途的岩性和土壤类型.在特殊埋设方案中,在原油管道必须埋设的地段,如大规模动物迁徙常用地段则使用通道冷液循环降(保)温系统和(或)热管(桩)降(保)温,来保护多年冻土.地上敷设方案包括桩基架设和地上洁净砾石管堤(垫护层).后者只在管道进入和离开多年冻土时采用.架设桩基横梁方案中使用有或没有热管保温的垂直支架梁(单元)(VSM).在初步规划和设计阶段,管道的业主公司(即横穿阿拉斯加管道系统,或TAPS)和随后的阿拉斯加管道服务公司(APSC)不容商量的坚决要求100%的埋设方案.但是,随着勘察工作的进展和设计方案的细化,施工设计方案在不断变化.1977年管道施工结束时,只有57%的管道采用了埋设方式.管道运行30 a后的今天(考虑运行期间维护中所产生的问题),很多经验丰富的工程师认为53%的埋设可能更合理.设计和施工方案变更的原因主要有:1)为了获得通过联邦政府所属的土地所需的许可证,政府有特殊的规定和要求;2)管道公司的设计、施工和管理人员进行了现场野外调查、研究,并积极参与了详细设计和研发;3)美国环境政策法案(NEPA)的最新要求(启用了核准制).阿拉斯加管道服务公司是7家主要石油公司的服务机构.由于这个项目的巨大规模和所涉及的高昂费用,致使各大石油公司的工程师非同寻常程度的参与.在文章中,笔者论述了与阿拉斯加管道施工有关的阿拉斯加管道服务公司、美国联邦和阿拉斯加州政府相关组织机构的形成历史,管道设计演变过程及其背后的哲学思想,以及阿拉斯加管道工程项目的经验和教训.     

弹性填料处理河道污水实验研究

采用弹性填料曝气生物膜法对污染的河道水体进行处理的实验研究,结果表明,在2m/h的流速、水温为16℃~18℃、气水比为1∶1的条件下,采用弹性填料的生物膜处理系统运转正常,不易发生堵塞或系统短流,系统此时的水力停留时间为3.5h左右,污水中的COD和NH3-N去除率稳定,其均值分别为49.4%和19.1%。     

Aggregate production: Fines generation during rock crushing

The energy required to crush rocks is proportional to the amount of new surface area that is created; hence, a very important percentage of the energy consumed to produce construction aggregates is spent in producing non-commercial fines. Data gathered during visits to quarries, an extensive survey and laboratory experiments are used to explore the role of mineralogy and fracture mode in fines production during the crushing of single aggregates and aggregates within granular packs. Results show that particle-level loading conditions determine the failure mode, resulting particle shape and fines generation. Point loading (both single particles and grains in loose packings) produces clean fractures and a small percentage of fines. In choked operations, high inter-particle coordination controls particle-level loading conditions, causes micro-fractures on new aggregate faces and generates a large amount of fines. The generation of fines increases when shear is imposed during crushing. Aggregates produced in current crushing operations show the effects of multiple loading conditions and fracture modes. Results support the producers' empirical observations that the desired cubicity of aggregates is obtained at the expense of increased fines generation when standard equipment is used.     

土钉面层配筋量计算原理及实例分析

本文在分析国内外大量文献资料的基础上,对土钉面层的受力机制进行了详细的讨论和分析,认为土钉面层主要受到钉体对面层的集中荷载及土体对面层的分布荷载作用。引入半弹性体和布辛涅奈斯克理论推导出了较为实用的土钉面层配筋量计算公式,并通过实例验证了该公式的正确性。     

M TSU : Recovering Seismic Moments from Tsunameter Records

We define a new magnitude scale, M_TSU, allowing the quantification of the seismic moment M₀ of an earthquake based on recordings of its tsunami in the far field by ocean-bottom pressure sensors (``tsunameters') deployed in ocean basins, far from continental or island shores which are known to affect profoundly and in a nonlinear fashion the amplitude of the tsunami wave. The formula for M_TSU, M_TSU = log₁₀ M₀ − 20 = log₁₀ X (ω) + C_D^TSU + C_S^TSU + C₀, where X (ω) is the spectral amplitude of the tsunami, C_D^TSU a distance correction and C_S^TSU a source correction, is directly adapted from the mantle magnitude M_m introduced for seismic surface waves by Okal and Talandier. Like M_m, its corrections are fully justified theoretically based on the representation of a tsunami wave as a branch of the Earth's normal modes. Even the locking constant C₀, which may depend on the nature of the recording (surface amplitude of the tsunami or overpressure at the ocean floor) and its units, is predicted theoretically. M_TSU combines the power of a theoretically developed algorithm, with the robustness of a magnitude measurement that does not take into account such parameters as focal geometry and exact depth, which may not be available under operational conditions in the framework of tsunami warning. We verify the performance of the concept on simulations of the great 1946 Aleutian tsunami at two virtual gauges, and then apply the algorithm to 24 records of 7 tsunamis at DART tsunameters during the years 1994–2003. We find that M_TSU generally recovers the seismic moment M₀ within 0.2 logarithmic units, even under unfavorable conditions such as excessive focal depth and refraction of the tsunami wave around continental masses. Finally, we apply the algorithm to the JASON satellite trace obtained over the Bay of Bengal during the 2004 Sumatra tsunami, after transforming the trace into a time series through a simple ad hoc procedure. Results are surprisingly good, with most estimates of the moment being over 10²⁹ dyn-cm, and thus identifying the source as an exceptionally large earthquake.