高应力区破裂岩体回采巷道一次强化支护技术及其应用研究

基于对高应力区破裂岩体回采巷道支护 10多年的经验和教训 ,本文首次提出了相对于主次承载区协调作用关系的关键支护技术 ,即一次强化支护技术。该支护技术不仅强调了对于高应力区破裂岩巷道支护时间的及时性 ,支护强度一次到位 ,更重要的是区别于先让后抗、二次支护的指导思想 ;同时 ,一次强化支护技术还详细明确了支护类型、支护结构以及施工工艺。该支护技术在小官庄铁矿高应力区的应用成功 ,表明该支护关键技术是正确的。     

MIDAS-W: a workstation-based incoherent scatter radar data acquisition system

The Millstone Hill Incoherent Scatter Data Acquisition System (MIDAS) is based on an abstract model of an incoherent scatter radar. This model is implemented in a hierarchical software system, which serves to isolate hardware and low-level software implementation details from higher levels of the system. Inherent in this is the idea that implementation details can easily be changed in response to technological advances. MIDAS is an evolutionary system, and the MIDAS hardware has, in fact, evolved while the basic software model has remained unchanged. From the earliest days of MIDAS, it was realized that some functions implemented in specialized hardware might eventually be implemented by software in a general-purpose computer. MIDAS-W is the realization of this concept. The core component of MIDAS-W is a Sun Microsystems UltraSparc 10 workstation equipped with an Ultrarad 1280 PCI bus analog to digital (A/D) converter board. In the current implementation, a 2.25 MHz intermediate frequency (IF) is bandpass sampled at 1 s intervals and these samples are multicast over a high-speed Ethernet which serves as a raw data bus. A second workstation receives the samples, converts them to filtered, decimated, complex baseband samples and computes the lag-profile matrix of the decimated samples. Overall performance is approximately ten times better than the previous MIDAS system, which utilizes a custom digital filtering module and array processor based correlator. A major advantage of MIDAS-W is its flexibility. A portable, single-workstation data acquisition system can be implemented by moving the software receiver and correlator programs to the workstation with the A/D converter. When the data samples are multicast, additional data processing systems, for example for raw data recording, can be implemented simply by adding another workstation with suitable software to the high-speed network. Testing of new data processing software is also greatly simplified, because a workstation with the new software can be added to the network without impacting the production system. MIDAS-W has been operated in parallel with the existing MIDAS-1 system to verify that incoherent scatter measurements by the two systems agree. MIDAS-W has also been used in a high-bandwidth mode to collect data on the November, 1999, Leonid meteor shower.     

The ALOMAR Rayleigh/Mie/Raman lidar: objectives, configuration, and performance

We report on the development and current capabilities of the ALOMAR Rayleigh/Mie/Raman lidar. This instrument is one of the core instruments of the international ALOMAR facility, located near Andenes in Norway at 69°N and 16°E. The major task of the instrument is to perform advanced studies of the Arctic middle atmosphere over altitudes between about 15 to 90 km on a climatological basis. These studies address questions about the thermal structure of the Arctic middle atmosphere, the dynamical processes acting therein, and of aerosols in the form of stratospheric background aerosol, polar stratospheric clouds, noctilucent clouds, and injected aerosols of volcanic or anthropogenic origin. Furthermore, the lidar is meant to work together with other remote sensing instruments, both ground- and satellite-based, and with balloon- and rocket-borne instruments performing in situ observations. The instrument is basically a twin lidar, using two independent power lasers and two tiltable receiving telescopes. The power lasers are Nd:YAG lasers emitting at wavelengths 1064, 532, and 355 nm and producing 30 pulses per second each. The power lasers are highly stabilized in both their wavelengths and the directions of their laser beams. The laser beams are emitted into the atmosphere fully coaxial with the line-of-sight of the receiving telescopes. The latter use primary mirrors of 1.8 m diameter and are tiltable within 30° off zenith. Their fields-of-view have 180 rad angular diameter. Spectral separation, filtering, and detection of the received photons are made on an optical bench which carries, among a multitude of other optical components, three double Fabry-Perot interferometers (two for 532 and one for 355 nm) and one single Fabry-Perot interferometer (for 1064 nm). A number of separate detector channels also allow registration of photons which are produced by rotational-vibrational and rotational Raman scatter on N₂ and N₂+O₂ molecules, respectively. Currently, up to 36 detector channels simultaneously record the photons collected by the telescopes. The internal and external instrument operations are automated so that this very complex instrument can be operated by a single engineer. Currently the lidar is heavily used for measurements of temperature profiles, of cloud particle properties such as their altitude, particle densities and size distributions, and of stratospheric winds. Due to its very effective spectral and spatial filtering, the lidar has unique capabilities to work in full sunlight. Under these conditions it can measure temperatures up to 65 km altitude and determine particle size distributions of overhead noctilucent clouds. Due to its very high mechanical and optical stability, it can also employed efficiently under marginal weather conditions when data on the middle atmosphere can be collected only through small breaks in the tropospheric cloud layers.     

IMPACT: an implicit time integration scheme for chemical species and families

The implicit time integration scheme of Stott and Harwood (1993) was proposed as an efficient scheme for use in three-dimensional chemical models of the atmosphere. The scheme was designed for chemistry schemes using chemical families, in which species with short lifetimes are grouped into longer-lived families. Further study with more complex chemistry, more species and reactions showed the scheme to be non-convergent and unstable under certain conditions; particularly for the perturbed chemical scenarios of polar stratospheric winters. In this work the scheme has been improved by revising the treatment of families and the convergence properties of the scheme. The new scheme has been named IMPACT (IMPlicit Algorithm for Chemical Time-stepping). It remains easy to implement and produces simulations that compare well with integrations using more accurate higher order schemes.     

X-ray binary unified analysis: pulse/RV application to Vela X1: GP Velorum

A procedure for simultaneous analysis of multiple kinds of observations is developed for binaries that contain X-ray pulsars. A wide variety of observation types might be included, although we consider only velocity: pulse and light: velocity: pulse cases at present. The model operates with equipotentials and can accommodate non-synchronous rotation and eccentric orbits. The duration condition imposed by observed X-ray eclipses is incorporated as an embedded constraint, so that only solutions consistent with the eclipse duration are found. Relations needed for the method of differential corrections in least-squares solutions are specified, and we apply the Marquardt scheme for improvement of solution convergence. Parameters of Vela X1: GP Velorum are obtained from seven combinations of pulse and radial velocity data. The estimated masses are thereby put into some perspective, especially for the neutron star. The mass of the supergiant ( m  sin³  i ) now ranges only ±5 per cent from the mean of seven results, although the uncertainty in i makes the actual mass range larger. We discuss the determinacy of certain parameters and their historical consistency. For example, the systemic radial velocity differs among spectroscopic data sets by more than 20 km s⁻¹. We show that, contrary to published assertions, the orbital inclinations of high-mass X-ray binaries are essentially indeterminable by the usual methods, although lower limits to inclination may be meaningful for some examples.     

TRIFFID Photometry of Globular Cluster Cores — I. Photometric Techniques and Variable Stars in M15

The Galway/DIAS Image Sharpening Camera, TRIFFID, has been used to make observations in two colours of the centre of the post-core-collapse globular cluster M15. We present here our analysis of the photometry in B over two seasons. We have combined the complementary qualities of the HST 's high astrometric precision and TRIFFID's extended coverage and photometric precision, to perform crowded-field photometry in the innermost region of M15. Our technique virtually eliminates the problem of extreme crowding which has hitherto hampered studies of the variable star populations in globular cluster cores, and thereby provides an extension of the HST 's capability. Candidate variables detected with the HST have been confirmed and monitored over longer periods. We show that most of these are RR Lyrae stars, and that one is a short-period Type II Cepheid (the third to be discovered in M15). Our photometric study also produced evidence of a similar number of new variables. These also appear to be RR Lyrae stars, except for a possible eclipsing system. Further data from an upgraded version of TRIFFID have recently been obtained to help to refine the light curves of all these objects.     

An optimal extraction algorithm for imaging photometry

This paper is primarily an investigation of whether the 'optimal extraction' techniques used in CCD spectroscopy can be applied to imaging photometry. It is found that using such techniques provides a gain of around 10 per cent in signal-to-noise ratio over normal aperture photometry. Formally, it is shown to be equivalent to profile fitting, but offers advantages of robust error estimation, freedom from bias introduced by mis-estimating the point spread function, and convenience. In addition some other techniques are presented, which can be applied to profile fitting, aperture photometry and the 'optimal' photometry. Code implementing these algorithms is available at http://www.astro.keele.ac.uk/~timn/.     

傅立叶变换红外光谱联用技术在化石燃料分析中的应用

对傅立叶变换红外光谱联用技术在化石燃料分析中的应用进行了较全面的总结评述,重点介绍了气相色谱／红外光谱联机、高压液相色谱／红外光谱联机、薄层色谱／红外光谱联机、超临界流体色谱／红外光谱联机、裂解色谱／红外光谱联机、热重分析／红外光谱联机、气相色谱／红外光谱／质谱三机联用技术等在化石燃料的结构组分分析、成因机理研究及其勘探等诸方面的重要应用,尤其是在芳香族化合物和几何异构体的分离鉴定方面发挥出的突出功效。引用文献５９篇。     

Inversion, error analysis, and validation of GPS/MET occultation data

The global positioning system meteorology (GPS/MET) experiment was the first practical demonstration of global navigation satellite system (GNSS)-based active limb sounding employing the radio occultation technique. This method measures, as principal observable and with millimetric accuracy, the excess phase path (relative to propagation in vacuum) of GNSS-transmitted radio waves caused by refraction during passage through the Earth’s neutral atmosphere and ionosphere in limb geometry. It shows great potential utility for weather and climate system studies in providing an unique combination of global coverage, high vertical resolution and accuracy, long-term stability, and all-weather capability. We first describe our GPS/MET data processing scheme from excess phases via bending angles to the neutral atmospheric parameters refractivity, density, pressure and temperature. Special emphasis is given to ionospheric correction methodology and the inversion of bending angles to refractivities, where we introduce a matrix inversion technique (instead of the usual integral inversion). The matrix technique is shown to lead to identical results as integral inversion but is more directly extendable to inversion by optimal estimation. The quality of GPS/MET-derived profiles is analyzed with an error estimation analysis employing a Monte Carlo technique. We consider statistical errors together with systematic errors due to upper-boundary initialization of the retrieval by a priori bending angles. Perfect initialization and properly smoothed statistical errors allow for better than 1 K temperature retrieval accuracy up to the stratopause. No initialization and statistical errors yield better than 1 K accuracy up to 30 km but less than 3 K accuracy above 40 km. Given imperfect initialization, biases ≫ 2 K propagate down to below 30 km height in unfavorable realistic cases. Furthermore, results of a statistical validation of GPS/MET profiles through comparison with atmospheric analyses of the European Centre for Medium-range Weather Forecasts (ECMWF) are presented. The comparisons indicate the high utility of the occultation data in that very good agreement of upper troposphere/lower stratosphere temperature (better than 1.5 K rms, ≪ 0.5 K bias) is found for a region (Europe+USA) where the ECMWF analyses are known to be good, but poorer agreement for a region (Southern Pacific) where the analyses are known to be degraded.