关于新疆煤炭工业可持续发展的思考

阐述了新疆煤炭工业发展中存在的主要问题,分析了新疆煤田地质工作的发展方向及当前工作重点,并对新疆煤炭工业的可持续发展战略提出了政策性建议。     

论层序地层学与含油气系统在油气勘探中的联系——以鄂尔多斯中生代盆地为例

虽然层序地层学与含油气系统理论的各自研究对象和研究方法不同，但由于层序地层学研究对象(沉积岩)是含油气系统研究对象(油气)的载体，二者可以由含油气盆地分析有机的结合起来。层序地层分析包含了对含油气系统的地质要素及成藏作用载体的分析，因而沉积层序的组成单元与含油气系统的地质要素有必然的联系：在一个沉积盆地的数个沉积层序中，成熟烃源岩往往是地史中具一定埋深、分布广、厚度大、有机质含量高的凝缩层，这个凝缩层往往是一个构造超层序的最大海(湖)泛面；储集岩往往是成熟烃源岩之上层序的低水位体系域或紧邻成熟烃源岩的高水位体系域；有效盖层为储集岩之上层序的水进体系域及凝缩层；成熟烃源岩之上的沉积层序为上覆岩层；低水位体系域储集岩有可能沿上倾方向尖灭，被层序界面及其上层序的水进体系域岩性圈闭；除构造裂缝外，低水位体系域下切谷可作为油气向上运移通道；一个含油气系统往往跨越不同的沉积层序甚至构造超层序。     

基桩有效桩长几个问题的探讨

从离心模型试验成果、超长单桩静载试验成果、工程实践及其他学者研究成果中,论证了普通单桩存在有效桩长。深入解释了有效桩长的含义,指出了与临界桩长概念有区别。在分析目前有效桩长定义基础上,提出了合理的有效桩长定义。明确了研究普通单桩有效桩长的意义及存在的问题,并提出了在一定条件下,合理确定有效桩长就是合理设计桩长。     

多年冻土地区金刚石矿的环境问题--以Yakutia 西北部Anabar矿为例

Placer diamond mining in the Anabar area involves various operations that cause long-term (nearly a quarter of a century) environmental impacts. The long history of mining activities, the technology used to mine the placers, as well as the poor assimilative capacity of the natural systems can result in serious environmental impacts in the area. The primary geochemical processes in the diamond-bearing area are affected by the occurrence of permafrost and relict ice, the lengthy duration of ice cover in water bodies, and the widespread development of cryogenic processes. This promotes physical migration of contaminants, cryogenic metamorphization of waters, and long-term accumulation of organic contaminants in low-temperature, reduction and sedimentation barriers. In this paper, some environmental and geochemical effects of diamond mining in the Arctic area are discussed.     

The effective number of cycles of earthquake ground motion

The seismic response of any system that accumulates damage under cyclic loading is dependent not only on the maximum amplitude of the motion but also its duration. This is explicitly recognized in methods for estimating the liquefaction potential of soil deposits. Many researchers have proposed that the effective number of cycles of the ground motion is a more robust indicator of the destructive capacity of the shaking than the duration. However, as is the case with strong‐motion duration, there is no universally accepted approach to determining the effective number of cycles of motion, and the different methods that have been proposed can give widely varying results for a particular accelerogram. Definitions of the effective number of cycles of motion are reviewed, classified and compared. Measurements are found to differ particularly for accelerograms with broad‐banded frequency content, which contain a significant number of non‐zero crossing peaks. The key seismological parameters influencing the number of cycles of motion and associated equations for predicting this quantity for future earthquakes are identified. Correlations between cycle counts and different duration measures are explored and found to be rather poor in the absence of additional parameters. Copyright © 2004 John Wiley & Sons, Ltd.     

Penny-shaped fractures revisited

All methods of seismic characterization of fractured reservoirs are based on effective media theories that relate geometrical and material properties of fractures and surrounding rock to the effective stiffnesses. In exploration seismology, the first-order theory of Hudson is the most popular. It describes the effective model caused by the presence of a single set of thin, aligned vertical fractures in otherwise isotropic rock. This model is known to be transversely isotropic with a horizontal symmetry axis (HTI). Following the theory, one can invert the effective anisotropy for the crack density and type of fluid infill of fractures, the quantities of great importance for reservoir appraisal and management.Here I compute effective media numerically using the finite element method. I deliberately construct models that contain a single set of vertical, ellipsoidal, non-intersecting and non-interconnected fractures to check validity of the first-order Hudson’s theory and establish the limits of its applicability. Contrary to conventional wisdom that Hudson’s results are accurate up to crack density e ≈ 0.1, I show that they consistently overestimate the magnitudes of all effective anisotropic coefficients ε^(V), δ^(V), and γ^(V). Accuracy of theoretically derived anisotropy depends on the type of fluid infill and typically deteriorates as e grows. While the theory gives | ε^(V)|, |δ^(V)|, |γ^(V)| and close to the upper bound of the corresponding numerically obtained values for randomly distributed liquid-filled fractures, theoretical predictions of ε^(V), δ^(V) are not supported by numerical computations when the cracks are dry. This happens primarily because the first-order Hudson’s theory makes no attempt to account for fracture interaction which contributes to the final result much stronger for gas- than for liquid-filled cracks. I find that Mori-Tanaka’s theory is superior to Hudson’s for all examined crack densities and both types of fluid infill.The paper was presented at the 11th International Workshop on Seismic Anisotropy (11IWSA) held in St. John’s, Canada in 2004.     

Effect of suction on the mechanical behaviour of iron ore rock

The effect of suction on the behaviour of iron ore has been studied from both physical and mechanical points of view. The porosity and the suction phenomena have been analysed using different experimental techniques. Uniaxial compressive tests on partially saturated samples have shown that the suction is responsible for strength and cohesion improvement. Considering the theory of partially saturated porous soils of Coussy and Dangla (Mécanique des sols non saturés (2002 edn). Hermès Science: 2002; 390), we have proposed a constitutive law for partially saturated iron ore. The real increase in the apparent cohesion due to the capillary attraction forces is overestimated if the yield function is written in terms of effective stresses. The effect of the capillary cohesion has been modelled with a function in the expression of the apparent cohesion of the yield function. The effect of suction on the mechanical behaviour has been represented in the effective stresses space and in the total stresses space like the Alonso model (Géotechnique 1990; 40 :405–430). Copyright © 2005 John Wiley & Sons, Ltd.     

A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.     

The effective stress concept and the evaluation of changes in pore air pressure under jacketed isotropic compression tests for dry sand based on the 2‐phase porous theory

The effective stress concept for solid‐fluid 2‐phase media was revisited in this work. In particular, the effects of the compressibility of both the pore fluid and the soil particles were studied under 3 different conditions, i.e., undrained, drained, and unjacketed conditions based on a Biot‐type theory for 2‐phase porous media. It was confirmed that Terzaghi effective stress holds at the moment when soil grains are assumed to be incompressible and when the compressibility of the pore fluid is small enough compared to that of the soil skeleton. Then, isotropic compression tests for dry sand under undrained conditions were conducted within the triaxial apparatus in which the changes in the pore air pressure could be measured. The ratio of the increment in the cell pressure to the increment in the pore air pressure, m, corresponds to the inverse of the B value by Bishop and was obtained during the step loading of the cell pressure. In addition, the m values were evaluated by comparing them with theoretically obtained values based on the solid‐fluid 2‐phase mixture theory. The experimental m values were close to the theoretical values, as they were in the range of approximately 40 to 185, depending on the cell pressure. Finally, it was found that the soil material with a highly compressible pore fluid, such as air, must be analyzed with the multi‐phase porous mixture theory. However, Terzaghi effective stress is practically applicable when the compressibilities of both the soil particles and the pore fluid are small enough compared to that of the soil skeleton.