VLBI观测双线极化条纹拟合方法

提出了一种可用于下一代VLBI观测系统(VGOS)的双线极化条纹拟合方法。现有的VLBI观测模式采用的是右圆极化(RCP),而VGOS系统采用的是双线极化。本文方法包括校正和组合条纹拟合两部分。校正部分选择一颗强源作为参考源,分别得到不同极化方式下的通道时延及相位校正数据,用于目标源的校正。组合条纹拟合部分将4种极化分量的可见度数据组合成伪Stokes分量,通过搜索差分星位角使伪Stokes分量的幅值达到最大,从而获得最终的时延观测量。与单极化条纹拟合相比,组合极化获得的条纹具有更高的信噪比(SNR)及更小的条纹相位弥散度。     

采用辐照度基法对FY-1C气象卫星可见近红外通道进行绝对辐射定标

介绍另一种在轨卫星传感器绝对辐射定标——辐照度基法定标,并利用敦煌辐射校正场对FY-1C卫星可见近红外通道进行定标。通常的反射率基法定标,表观反射率计算的一个重要误差来源是对气溶胶散射的近似计算。辐照度基法定标采用实际测量的漫射与总辐射比来代替辐射传输计算的气溶胶散射。利用该方法对FY-1C卫星的5次定标结果表明,大部分日期辐照度基法和反射率基法定标结果非常吻合,肯定了辐照度基法的正确性,但在气溶胶含量较大时,辐照度基法提高定标精度的优点显现出来,能够减少辐射传输模式对气溶胶散射计算带来的误差,提高最终的绝对辐射定标精度。     

The 3-hour-interval prediction of ground-level temperature in South Korea using dynamic linear models

The 3-hour-interval prediction of ground-level temperature from 00 h out to 45 h in South Korea(38 stations) is performed using the DLM (dynamic linear model) in order to eliminate the systematic error of numerical model forecasts. Numerical model forecasts and observations are used as input values of the DLM. According to the comparison of the DLM forecasts to the KFM (Kalman filter model) forecasts with RMSE and bias, the DLM is useful to improve the accuracy of prediction.     

四种计算地震反应数值方法的比较研究

本文在简要总结了计算单自由度系统地震反应频域方法和时域方法的特点之后,按照统一的递归公式,系统地对计算单自由度体系的四种时域方法即中心差分方法、Newmark方法、Z变换方法、Duhamel逐步积分法进行了对比研究。通过递归系数b1和b2的不变性、传递函数的低频约束条件和相位特性以及数值分析等几个方面说明了上述方法各自的优缺点、相对精度和适用的范围。根据动力平衡方程的算子不变性,研究了上述方法的共性特征,揭示了相对位移、相对速度、相对加速度递归公式的内在联系,这表明只要知道相对位移的递归公式,相对速度、相对加速度的递归公式也就随之确定,在此基础上推荐了一套计算单自由度系统相对位移、相对速度、相对加速度地震反应的递归公式。     

Analysis of the influence of Taihu Lake and the urban heat islands on the local circulation in the Yangtze Delta

The influences of human activities on regional climate and weather are tremendous. The re-gional temperature and the distributing of wind field are influenced, whereas the precipitation in-tensity and the spatial and temporal distribution of the precipita…     

A remote sensing model for monitoring soil evaporation based on differential thermal inertia and its validation

To develop geosciences quantification and multi-dimensional researches will be an inevitable trend in the 21st century. The interaction between the land surface and the atmosphere not only serves as an important component in geosciences quantification, bu…     

Oxygen isotope compositions of quartz grains (4–16 μm) from Chinese eolian deposits and their implications for provenance

Oxygen isotope compositions were measured in quartz grains extracted from a 7.0 Ma red clay-loess sequence at Lingtai and six late Pleistocene loess sediments (Malan loess). Results show that the changes in oxygen isotope compositions of Malan loess are basically controlled by the geochemical characteristics of the source materials, while the effect of weathering process after dust deposition could be minor. The oxygen isotope distribution of quartz grains from red clay at Lingtai is similar to that of the overlying loess-paleosol sequence, thus indicating that the red clay at Lingtai has the same eolian origin as the loess-paleosol deposits. Furthermore, the oscillations of the isotope compositions in 4–16 μm-sized quartz grains may reflect the changes, to some extent, of the climatic systems of the source region.     

Dynamic stress concentration and scattering of SH-wave by interface elliptic cylindrical cavity

In this paper, the dynamic stress concentration and scattering of SH-waves by bi-naterial structures that possess an interface elliptic cavity are investigated. First, by using the complex function method, the Green‘s function is constructed. This yields the solution of the displacement field for an elastic half space with a semi-elliptic canyon impacted by an anti-plane harmonic line source loading on the horizontal surface. Then, the problem is divided into an upper and lower half space along the horizontal interface, regarded as a harmony model. In order to satisfythe integral continuity condition,the unknown anti-plane forces are applied to the interface. The integral equations with unknown forces can be established through the continuity condition, and after transformation, the algebraic equations are solved numerically. Finally, the distribution of the dynamic stress concentration factor (DSCF) around the elliptic cavity is given and the effect of different parameters on DSCF is discussed.     

泥沙起动判别标准探讨

分析了现有起动标准的不足之处。在制定起动标准时,不但要考虑水流条件,还必须考虑泥沙颗粒在床面的相对位置。对同一粒径的泥沙颗粒,其起动条件不是一个常量,而是位于一个区间,它随颗粒在床面的相对暴露度而变化。根据力学原理,推导了泥沙颗粒起动时的临界无量纲切应力公式,并对其系数取值进行了理论计算。计算结果表明,对同一粒径、在同一起动状态下,泥沙颗粒的起动临界条件并非一个常量。并从理论上分析得到了临界值的范围,对个别及少量起动,其无量纲临界切应力为0.021～0.042及0.041～0.062。     

区域人地系统的优化调控与可持续发展

区域人地系统的优化调控始终是现代地理学的重要任务,也是市场经济条件下中国实施可持续发展战略的理论基石。文章认为,区域人地系统优化调控的对象结构应从PRED系统改进为P_DR_DE_DE_DE_DS_D系统,人地系统优化调控的切入点与重点应坚持“以人为本”,而调控的重中之重应是人的意识建设,优化调控的目标点是追求和谐发展至上的目标。人地系统优化调控的动态机理在于模拟“人圈”与“地圈”的最佳距离,优化调控的空间结构包括核心区、发生区、支持区和作用区,各功能区相互竞争的结果形成区域定位与空间共生。协调优化和调控区域人地系统,不仅包括人地系统各要素之间以及各要素内部发展的动态协调与优化,而且包括区域之间人地系统的空间协调和优化,只有同时实现了区域之间人地系统的产业组织协调和空间组织协调,消除了区域盲目竞争与区域冲突,才能实现人地系统经济社会行为对空间区位的合理占据,才能真正实现区域之间的协调发展和空间共生。