岩层移动动态过程的离散单元法分析

采动覆岩动态发展过程受地质、采矿条件诸多因素的影响,是一个十分复杂的时空过程。通过离散单元法数值模拟,揭示了综放开采条件下采场上覆岩层动态发展规律,特别是覆岩离层缝隙的分布规律、发展形态、空间位置以及与地质采矿条件的关系,揭示了工作面推进过程中,采场上覆岩层中重新分布的应力大小、方向及其发展变化规律,该应力的存在和变化规律是确定井下开采方法、支护方式的依据。     

采用土工合成材料的新型护岸结构的动态数值模拟

固化土和土工格栅护岸工法（SG-WALL工法）是一种采用固化土和土工格栅加固港口护岸结构的新型工法。它的抗震性能已经通过一系列振动台试验得到了确认。为了能够数值再现SG-WALL结构在地震荷载作用下的动力反应,对SG-WALL结构的振动台试验进行了动态数值模拟研究。试验和模拟结果的对比表明,数值模拟方法能够再现SG-WALL结构在振动荷载作用下的主要动力特征。模拟结果还表明：固化土的长度对SG-WALL抗震性能起到重要的影响;土工格栅的最大拉应变发生在与排桩的连接处,并且沿着远离排桩的方向逐渐减小。     

Three-dimensional forward and backward modelling of diapirism: numerical approach and its applicability to the evolution of salt structures in the Pricaspian basin

Numerical studies of ductile deformations induced by salt movements have, until now, been restricted to two-dimensional (2D) modelling of diapirism. This paper suggests a numerical approach to model the evolution of three-dimensional (3D) salt structures toward increasing maturity. This approach is also used here to restore the evolution of salt structures through successive earlier stages. The numerical methodology is applied to study several model examples. We analyse a model of salt diapirs that develop from an initial random perturbation of the interface between salt and its overburden and restore the evolved salt diapirs to their initial stages. We show that the average restoration errors are less than 1%. An evolutionary model of a 2D salt wall loaded by a 2D pile of sediments predicts a decomposition of the salt wall into 3D diapiric structures when the overburden of salt is supplied by 3D synkinematic wedge of sediments. We model salt extrusion feeding a gravity current over the depositional surface and estimate an average rate of extrusion and horizontal velocity of salt spreading. Faulting of the overburden to salt overhangs initiates new secondary diapirs, and we analyse the growth of these secondary diapirs. We also study how lateral flow effects the evolution of salt diapirs. The shape of a salt diapir can be very different if the rate of horizontal flow is much greater than the initial rate of diapiric growth solely due to gravity. We discuss the applicability of the results of the models to the evolution of Late Permian salt structures in the Pricaspian basin (Russia and Kazakhstan). These structures are distinguishable into a variety of styles representing different stages of growth: salt pillows, diapirs, giant salt massifs, 2D diapiric walls and 3D stocks complicated by large overhangs. The different sizes, shapes and maturities of salt structures in different parts of the Pricaspian basin reflect areal differences in salt thickness and loading history. Our results suggest that the numerical methodology can be employed to analyse the evolution of all salt structures that have upbuilt through younger ductile overburdens.     

鄂东北大别杂岩中混合岩形成的动力学机制

本文针对中小位移量伸缩缝构造进行设计研究，提出了一种常温固化型桥梁伸缩缝。经过对伸缩量Δ２０ｃｍ，Δ＝４０ｃｍ的多座桥梁的实验应用表明，这是一种适用于中小位移量桥梁中性能良好的伸缩缝，施工简便。其桥缝具体结构为，在两侧拍击区采用钢纤维混凝土增，缝内用高分子聚合物与一定比例的水泥及掺合物拌和均匀，经一段时间与桥面和加固铺装层固化成具有较高弹性和一定强度的整体式桥梁伸缩缝。其效果良好，供应用参考。     

Aerodynamic Characteristics of the Crest with Membrane Attachment on Cretaceous Pterodactyloid Nyctosaurus

The Nyctosaurus specimen KJ1 was reconstructed under the hypothesis that there is a membrane attached to the crest; the so-called headsail crest. The aerodynamic forces and moment acting on the headsail crest were analyzed. It was shown that KJ1 might adjust the angle of the headsail crest relative to the air current as one way to generate thrust (one of the aerodynamic forces, used to overcome body drag in forward flight) and that the magnitude of the thrust and moment could vary with the gesture angle and the relative location between the aerodynamic center of the headsail crest and body’s center of gravity. Three scenarios were tested for comparison: the crest with membrane attachment, the crest without membrane attachment and the absence of a cranial crest. It was shown that the aerodynamic characteristics (increasing, maintaining and decreasing thrusts and moment) would have almost disappear in flight for the crest without membrane attachment and was non-existent without the cranial crest. It is suggested from aerodynamics evidence alone that Nyctosaurus specimen KJ1 had a membrane attached to the crest and used this reconstructed form for auxiliary flight control.     

水下拖曳系统运动姿态仿真研究

采用凝集参数法建立了水下拖曳系统的三维离散模型,该模型由一系列的质量点和不计重量的弹簧组成.采用数学模型编程对NCEL浮球实验和四个典型拖曳系统进行了仿真计算.计算结果表明此数学模型具有一定的理论意义和工程实用价值.     

数字检波器在地震勘探中的应用效果

随着地震勘探精度的要求和发展,对地震仪器和检波器的要求也不断提高,只有接收到来自地下的有效反射信号,尤其是深层的高频弱反射信号,才能通过室内处理达到提高勘探精度的目的。数字检波器具有直接输出数字、高保真矢量场、感应器倾斜校正等特点,其动态范围与目前最先进的地震仪器相匹配,对来自地下的地震波没有改造,真实地记录了地震波的特性。针对数字检波器的特性进行了系统试验,通过试验效果分析认为:在信噪比方面,单个数字检波器与单个普通检波器无明显的差别,但单个数字检波器的信噪比明显低于多个普通检波器组合的信噪比;在能量方面,单个数字检波器的能量相当于多个普通检波器组合的能量;在频率方面,教字检波器比普通检波器的频带宽,可以预测,数字检波器将广泛地应用于高分辨率地震勘探中。     

对模式匹配算法的存储优化研究

基于确定性有限自动机(DFA)的多模式匹配算法被广泛用于数据包深度检测系统中。它功能虽然强大,但是对内存的需求也比较大,因此很多算法提出了对它的优化方法,以减少对内存的需求量。本文通过用动态默认转移来替代DFA的failto转移,将DFA中大部分的failto转移删掉,从而达到优化DFA的目的。而且本算法易于用硬件实现,因此在对速度有要求的场合,可以通过专门的硬件来计算默认转移,这样默认转移的计算并不会对检测产生延迟,从而加快匹配速度。     

厦门近岸水域海洋附着细菌的群落结构及其动态变化

为研究海洋附着细菌的群落结构及动态变化,在厦门近岸海区进行挂板实验.将无菌玻璃板浸没于海水中,连续放置14 d.分别于放置1 h和7、14 d后取玻璃板上附着生物样品.用细菌通用引物构建16S rRNA基因克隆文库,每个克隆文库随机挑选约40个克隆子测序,序列同源性分析和系统进化分析结果表明,所有的克隆子可分为六大类群:γ-变形菌纲(γ-Proteobacteria)、拟杆菌门(Bacteroidetes)、厚壁菌门(Firmicutes)、α-变形菌纲(α-Proteobacteria)、蓝细菌门(Cyanobacteria)和真核硅藻类叶绿体,各类群分别占42.0%、4.5%、2.2%、2.2%、1.1%和45.0%.γ-变形菌纲变形斑沙雷氏菌(Serratia proteamaculans)为优势附着细菌,占测序克隆子的31.5%.这类细菌在1 h样品中的比例超过一半,说明变形斑沙雷氏菌在生物膜形成初期发挥着重要作用.随着挂板时间延长,检测到的细菌类群有所增加:附着7 d后检测到拟杆菌门细菌,附着14 d后检测到厚壁菌门细菌.γ-变形菌纲细菌所占比例随挂板时间的延长而逐渐降低,从挂板1 h的81%降至7 d的21%,14 d的18%.另外,在各阶段的附着样品中,都检测到较多的真核克隆子序列,约占16%～64%.本研究为进一步阐明海洋附着细菌的附着动态及其在生物膜形成过程中的作用奠定了基础.