Ekman螺线的动力学结构

介绍了Ekman螺线的动力学结构 ,分析研究了风应力及海水内部的动量传递形式 .结果表明 :动量传递方向与海流方向成 45°左偏 .这对于研究海洋内部的动力结构是有意义的 .     

Dynamic Analysis of a Single-Column Platform (II)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.     

不同软基处理方法适用性比较

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。     

动荷载作用下海底粉土的孔压响应及其动强度

本文选用近海分布较广的粉土为研究对象 ,利用室内动三轴试验结果 ,找出动荷载作用下粉土的动应力应变关系 ,分析模拟波浪荷载作用下粉土中的孔压响应、临界循环次数 ,确定波浪作用下粉土的应力状态、破坏临界循环次数 ,判断不同深度处的粉土发生液化的可能性及发生液化所需要的时间 ;研究粉土在动荷载作用下的强度降低 ,为海上工程设计和施工提供科学依据。     

唐山市滨海湿地动态演变特征及其机制分析

利用历史资料和Landsat TM卫星遥感图像,研究了唐山市滨海湿地自建国以来的演变特征,着重对1987~2004年陡河———滦河之间的滨海平原湿地类型进行了识别,绘制了不同时期的景观面解译图。利用Mapinfo制图软件计算出两个时期的面积(比例)转化矩阵,显示该区滨海湿地破碎化加重,其动态演变特征呈明显退化趋势,进而提出引起其退化的原因和发展趋势预测。     

The impact of the M2 internal tide on data-assimilative model estimates of the surface tide

We use a synthetic data experiment to assess the accuracy of ocean tides estimated from satellite altimetry data, with emphasis on the impact of the phase-locked internal tide, which has a surface expression of several centimeters near its sites of genesis. Previous tidal estimates have regarded this signal as a random measurement error; however, it is deterministic and not scale-separated from the barotropic (surface) tide around complex bathymetric features. The synthetic data experiments show that the internal tide has a negligible impact on the barotropic tidal fields inferred under these circumstances, and the barotropic dissipation (a quadratic functional of the tidal fields) is in good agreement with the energetics of the three-dimensional regional primitive equations model which is the source of the synthetic data.     

“数字海底”系统建模中的关键技术研究

基于“数字海底”系统的理论基础研究和在海底科学应用中的具体实践,提出了“数字海底”的涵义、系统组成和体系结构,对空间数据管理技术、基于XML的WebGIS空间数据表达技术、复杂海底三维建模技术、多源信息的一体化集成显示技术、虚拟现实技术等“数字海底”系统建模中的关键技术进行了探讨,为从事海底资源研究和开发的人员提供各个层次的参考或帮助.     

Dynamic Analysis of A Pontoon-Separated Floating Bridge Subjected to A Moving Load

1 .Introduction Since the most significant feature of a movingloadisits mobility,the interaction betweenthe ve-hicle and bridge is very complicated,which can be classified as a coupled vibration problem.There-fore ,much attention has been paid to the dyna…     

Crustal Thinning of the Northern Continental Margin of the South China Sea

Magnetic data suggest that the distribution of the oceanic crust in the northern South China Sea (SCS) may extend to about 21 °N and 118.5 °E. To examine the crustal features of the corresponding continent–ocean transition zone, we have studied the crustal structures of the northern continental margin of the SCS. We have also performed gravity modeling by using a simple four-layer crustal model to understand the geometry of the Moho surface and the crustal thicknesses beneath this transition zone. In general, we can distinguish the crustal structures of the study area into the continental crust, the thinned continental crust, and the oceanic crust. However, some volcanic intrusions or extrusions exist. Our results indicate the existence of oceanic crust in the northernmost SCS as observed by magnetic data. Accordingly, we have moved the continent–ocean boundary (COB) in the northeastern SCS from about 19 °N and 119.5 °E to 21 °N and 118.5 °E. Morphologically, the new COB is located along the base of the continental slope. The southeastward thinning of the continental crust in the study area is prominent. The average value of crustal thinning factor of the thinned continental crust zone is about 1.3–1.5. In the study region, the Moho depths generally vary from ca. 28 km to ca. 12 km and the crustal thicknesses vary from ca. 24 km to ca. 6 km; a regional maximum exists around the Dongsha Island. Our gravity modeling has shown that the oceanic crust in the northern SCS is slightly thicker than normal oceanic crust. This situation could be ascribed to the post-spreading volcanism or underplating in this region.     

动力定位系统与单波束测深仪在科考船定点作业中的应用

科考船定点作业时会受到海洋风、涌、浪、流等外界环境因素影响，导致工作效率降低，原位测量精度下降，甚至影响作业安全。动力定位系统 （DP） 具有自动定位功能，能够抵抗外界环境因素的影响，可实现科考船高精度定点控位。 单波束测深仪不仅可以测量水深，也可反映水下设备深度信息，可以起到辅助监控水下设备功能。本文在介绍定点作业施工现状与局限性的基础上，分析 DP 系统与单波束测深仪工作原理，以“向阳红 01”船为载体，在定点作业时开启 DP 系统与单波束测深仪，发现该方法可以提高科考船定点作业工作效率、原位测量精度并保障作业安全，可为其他科考船定点作业提供参考。